CAM status: CCB request completed with an error

[Johan Hendriks]

I did go from 9 pre to 10, and had a lot of those messages also.
I needed to rebuild some ports like hal, smartmontools and other ports to
notice the changes made to the cam subsystem.
Maybe some of it got backported to 9 as well and you need to rebuild them
also.
Regards
Johan
Op 23 dec. 2013 19:45 schreef "Joseph Olatt" <joji at eskimo.com>:

> Hi,
>
> Just upgraded from 9.2-PRERELEASE to the following:
>
>   FreeBSD cognac 9.2-STABLE FreeBSD 9.2-STABLE #0 r259742: Sun Dec 22
> 20:01:13 CST 2013     root at cognac:/usr/obj/usr/src/sys/GENERIC  i386
>
> and started seeing the following error when I insert a USB flash drive.
> This flash drive was working fine with 9.2-PRERELEASE.
>
>   ugen6.2: <Lexar> at usbus6
>   umass0: <Lexar JD Secure II +, class 0/0, rev 2.00/11.00, addr 2> on
>   usbus6
>   umass0:  SCSI over Bulk-Only; quirks = 0x4101
>   umass0:2:0:-1: Attached to scbus2
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Retrying command
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Retrying command
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Retrying command
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Retrying command
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted
>
>
> Anybody else seeing issues with the USB/CAM subsystem with the new the
> new 9.2-STABLE code?
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>