ServeRAID BR10il (LSISAS1064E)

[Alexey V. Panfilov]

16.05.2012 18:19, Volodymyr Kostyrko wrote:
> Alexey V. Panfilov wrote:
>> I try to boot from CDROM with FreeBSD on IBM xServer x3250 M4 (P/N
>> 2583-72G), but it always crash with message: "NMI ISA b8, EISA ff
>> RAM parity error, likely hardware failure".
>
> This can be RAM error.

I don't think so: without raid controller it boots fine always (and 
CentOS installs fine). Moreover, I can boot from usb hdd with custom 
kernel (with removed all not used options and devices and even little 
more). After kldload mpt.ko pciconf shows info about it:

mpt0 at pci0:31:0:0:       class=0x010000 card=0x03bb1014 chip=0x00561000 
rev=0x08 hdr=0x00
     vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
     device     = 'SAS 3000 series, 4-port with 1064E -StorPort'
     class      = mass storage
     subclass   = SCSI
     bar   [10] = type I/O Port, range 32, base 0x3000, size 256, disabled
     bar   [14] = type Memory, range 64, base 0xc1b10000, size 16384, 
enabled
     bar   [1c] = type Memory, range 64, base 0xc1b00000, size 65536, 
enabled
     cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
     cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8)
     cap 05[98] = MSI supports 1 message, 64 bit
     cap 11[b0] = MSI-X supports 1 message in map 0x14
ecap 0001[100] = AER 1 0 fatal 1 non-fatal 0 corrected

And now I can provide any info about hw.

P.S. my case is the same as http://forums.freebsd.org/showthread.php?t=11222


--
Simple Lehisnoe ;-)