mpt: Unable to memory map registers
Andrey Zonov
andrey at zonov.org
Sat Jun 16 10:10:54 UTC 2012
On 6/15/12 9:24 PM, John Baldwin wrote:
> On Friday, June 15, 2012 2:12:06 am Andrey Zonov wrote:
>> On 6/13/12 7:10 PM, John Baldwin wrote:
>>> On Tuesday, June 12, 2012 5:57:34 pm Andrey Zonov wrote:
>>>> On 6/13/12 12:51 AM, John Baldwin wrote:
>>>>> On Tuesday, June 12, 2012 3:53:09 pm Andrey Zonov wrote:
>>>>>> On 6/12/12 10:06 PM, John Baldwin wrote:
>>>>>>>
>>>>>> [snip]
>>>>>>> Ok, I've added some more debugging. The patch is a bit larger now and
> you
>>>>> can
>>>>>>> fetch it from www.freebsd.org/~jhb/patches/pcib_debug.patch
>>>>>>>
>>>>>>
>>>>>> New dmesg is in attach.
>>>>>
>>>>> Sheesh, found another bug (wasn't masking 'front' properly).
>>>>>
>>>>> Try updated patch (same URL).
>>>>>
>>>>
>>>> Great! It works!
>>>
>>> Excellent. I've committed the 2 bugs needed to fix your box. However,
>>> there is another bug that this exposed that I'd like you to test. Can you
>>> update to the latest HEAD, apply the updated pcib_debug.patch, and boot
>>> with 'hw.pci.pcib_clear=1' set from the loader? That should exercise the
>>> bug I'm worried about and see if my fixes for that (recursively growing
>>> windows) works correctly.
>>>
>>
>> Attached.
>
> Hmm, it doesn't seem like hw.pci.pcib_clear was set (the pcibX devices still
> tried to allocate their initial windows).
>
Ooops.
--
Andrey Zonov
-------------- next part --------------
MP Configuration Table version 1.4 found at 0xffffffff800fcb70
Table 'FACP' at 0xdffb0290
Table 'APIC' at 0xdffb0390
APIC: Found table at 0xdffb0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 4 ACPI ID 2: enabled
SMP: Added CPU 4 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 5 ACPI ID 4: enabled
SMP: Added CPU 5 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 5: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 6: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 7: enabled
SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 8: enabled
SMP: Added CPU 7 (AP)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0 r237018M: Sat Jun 16 09:40:07 UTC 2012
root at dst-dev.yandex.ru:/usr/obj/usr/src/sys/head amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80fdc000.
Calibrating TSC clock ... TSC clock: 2826305989 Hz
CPU: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz (2826.31-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc0ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE,OSXSAVE>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000001028000 - 0x00000000dff9ffff, 3740762112 bytes (913272 pages)
0x00000000dffae000 - 0x00000000dffaffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x00000007e2ea0fff, 29576794112 bytes (7220897 pages)
avail memory = 33113063424 (31579 MB)
INTR: Adding local APIC 0 as a target
Event timer "LAPIC" quality 400
ACPI APIC Table: <090808 APIC1308>
INTR: Adding local APIC 0 as a target
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x098000-0x098fff at 0xffffff8000290000
x86bios: EBDA 0x09e000-0x09ffff at 0xfffffe000009e000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 3
APIC: CPU 2 has ACPI ID 5
APIC: CPU 3 has ACPI ID 7
APIC: CPU 4 has ACPI ID 2
APIC: CPU 5 has ACPI ID 4
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 8
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xf9960 00024 (v02 ACPIAM)
ACPI: XSDT 0xdffb0100 00074 (v01 090808 XSDT1308 20080908 MSFT 00000097)
ACPI: FACP 0xdffb0290 000F4 (v03 090808 FACP1308 20080908 MSFT 00000097)
ACPI: DSDT 0xdffb04d0 05414 (v01 CLSea CLSea007 00000007 INTL 20051117)
ACPI: FACS 0xdffbe000 00040
ACPI: APIC 0xdffb0390 000AA (v01 090808 APIC1308 20080908 MSFT 00000097)
ACPI: MCFG 0xdffb0490 0003C (v01 090808 OEMMCFG 20080908 MSFT 00000097)
ACPI: OEMB 0xdffbe040 00071 (v01 090808 OEMB1308 20080908 MSFT 00000097)
ACPI: HPET 0xdffb58f0 00038 (v01 090808 OEMHPET 20080908 MSFT 00000097)
ACPI: ASF! 0xdffb5928 00083 (v32 AMIASF E7230ASF 00000001 INTL 20051117)
ACPI: EINJ 0xdffb59b0 00130 (v01 AMIER AMI_EINJ 20080908 MSFT 00000097)
ACPI: BERT 0xdffb5b40 00030 (v01 AMIER AMI_BERT 20080908 MSFT 00000097)
ACPI: ERST 0xdffb5b70 001B0 (v01 AMIER AMI_ERST 20080908 MSFT 00000097)
ACPI: HEST 0xdffb5d20 000A8 (v01 AMIER AMI_HEST 20080908 MSFT 00000097)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec88000
MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec89000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
null: <null device, zero device>
nfslock: pseudo-device
random: <entropy source, Software, Yarrow>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
cpuctl: access to MSR registers/cpuid info.
io: <I/O>
acpi0: <090808 XSDT1308> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: reservation of fed1c000, 4000 (3) failed
acpi0: reservation of fed20000, 25000 (3) failed
acpi0: reservation of fed45000, 5b000 (3) failed
acpi0: reservation of feda0000, 20000 (3) failed
acpi0: reservation of fec01000, 7f000 (3) failed
acpi0: reservation of fec80000, 6000 (3) failed
acpi0: reservation of fec86000, a000 (3) failed
acpi0: reservation of ff000000, 400000 (3) failed
acpi0: reservation of ff400000, 400000 (3) failed
acpi0: reservation of ff800000, 400000 (3) failed
acpi0: reservation of ffc00000, 400000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
cpu0: Processor \\_PR_.P001 (ACPI ID 1) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: Processor \\_PR_.P002 (ACPI ID 2) -> APIC ID 4
cpu1: <ACPI CPU> on acpi0
cpu2: Processor \\_PR_.P003 (ACPI ID 3) -> APIC ID 1
cpu2: <ACPI CPU> on acpi0
cpu3: Processor \\_PR_.P004 (ACPI ID 4) -> APIC ID 5
cpu3: <ACPI CPU> on acpi0
cpu4: Processor \\_PR_.P005 (ACPI ID 5) -> APIC ID 2
cpu4: <ACPI CPU> on acpi0
cpu5: Processor \\_PR_.P006 (ACPI ID 6) -> APIC ID 6
cpu5: <ACPI CPU> on acpi0
cpu6: Processor \\_PR_.P007 (ACPI ID 7) -> APIC ID 3
cpu6: <ACPI CPU> on acpi0
cpu7: Processor \\_PR_.P008 (ACPI ID 8) -> APIC ID 7
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 49
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 50
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic
hpet0: t1: irqs 0x00f00000 (0)
hpet0: t2: irqs 0x00f00800 (0)
Timecounter "HPET" frequency 14318180 Hz quality 950
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15
Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xd0000-0xdffff
pcib0: decoding 3 range 0xf0000000-0xfebfffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x4003, revid=0x20
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x4021, revid=0x20
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 48
found-> vendor=0x8086, dev=0x4025, revid=0x20
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages
pcib0: matched entry for 0.5.INTA
pcib0: slot 5 INTA hardwired to IRQ 52
found-> vendor=0x8086, dev=0x4029, revid=0x20
domain=0, bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 56
found-> vendor=0x8086, dev=0x402f, revid=0x20
domain=0, bus=0, slot=15, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI-X supports 4 messages in map 0x10
map[10]: type Memory, range 64, base 0xfd7f8000, size 14, enabled
pcib0: allocated type 3 (0xfd7f8000-0xfd7fbfff) for rid 10 of pci0:0:15:0
pcib0: matched entry for 0.15.INTA
pcib0: slot 15 INTA hardwired to IRQ 57
found-> vendor=0x8086, dev=0x4030, revid=0x20
domain=0, bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4030, revid=0x20
domain=0, bus=0, slot=16, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4030, revid=0x20
domain=0, bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4030, revid=0x20
domain=0, bus=0, slot=16, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4030, revid=0x20
domain=0, bus=0, slot=16, func=4
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4031, revid=0x20
domain=0, bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4035, revid=0x20
domain=0, bus=0, slot=21, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4035, revid=0x20
domain=0, bus=0, slot=21, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4036, revid=0x20
domain=0, bus=0, slot=22, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x4036, revid=0x20
domain=0, bus=0, slot=22, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2690, revid=0x09
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2694, revid=0x09
domain=0, bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2696, revid=0x09
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2688, revid=0x09
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0x9000, size 5, enabled
pcib0: allocated type 4 (0x9000-0x901f) for rid 20 of pci0:0:29:0
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2689, revid=0x09
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x9080, size 5, enabled
pcib0: allocated type 4 (0x9080-0x909f) for rid 20 of pci0:0:29:1
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x268c, revid=0x09
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfd7ff800, size 10, enabled
pcib0: allocated type 3 (0xfd7ff800-0xfd7ffbff) for rid 10 of pci0:0:29:7
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x244e, revid=0xd9
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1b (6750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2670, revid=0x09
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x269e, revid=0x09
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:31:1
found-> vendor=0x8086, dev=0x2681, revid=0x09
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x9c00, size 3, enabled
pcib0: allocated type 4 (0x9c00-0x9c07) for rid 10 of pci0:0:31:2
map[14]: type I/O Port, range 32, base 0x9880, size 2, enabled
pcib0: allocated type 4 (0x9880-0x9883) for rid 14 of pci0:0:31:2
map[18]: type I/O Port, range 32, base 0x9800, size 3, enabled
pcib0: allocated type 4 (0x9800-0x9807) for rid 18 of pci0:0:31:2
map[1c]: type I/O Port, range 32, base 0x9480, size 2, enabled
pcib0: allocated type 4 (0x9480-0x9483) for rid 1c of pci0:0:31:2
map[20]: type I/O Port, range 32, base 0x9400, size 5, enabled
pcib0: allocated type 4 (0x9400-0x941f) for rid 20 of pci0:0:31:2
map[24]: type Memory, range 32, base 0xfd7ffc00, size 10, enabled
pcib0: allocated type 3 (0xfd7ffc00-0xfd7fffff) for rid 24 of pci0:0:31:2
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x269b, revid=0x09
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x400, size 5, enabled
pcib0: allocated type 4 (0x400-0x41f) for rid 20 of pci0:0:31:3
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 48 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 11
pcib1: subordinate bus 11
pcib1: no prefetched decode
pci11: <ACPI PCI bus> on pcib1
pci11: domain=0, physical bus=11
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pcib2: domain 0
pcib2: secondary bus 10
pcib2: subordinate bus 10
pcib2: no prefetched decode
pci10: <ACPI PCI bus> on pcib2
pci10: domain=0, physical bus=10
pcib3: <ACPI PCI-PCI bridge> irq 56 at device 9.0 on pci0
pcib3: domain 0
pcib3: secondary bus 5
pcib3: subordinate bus 9
pcib3: no prefetched decode
pci5: <ACPI PCI bus> on pcib3
pci5: domain=0, physical bus=5
found-> vendor=0x8086, dev=0x3500, revid=0x01
domain=0, bus=5, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
pcib3: matched entry for 5.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x350c, revid=0x01
domain=0, bus=5, slot=0, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci5
pcib4: domain 0
pcib4: secondary bus 7
pcib4: subordinate bus 9
pcib4: no prefetched decode
pci7: <ACPI PCI bus> on pcib4
pci7: domain=0, physical bus=7
found-> vendor=0x8086, dev=0x3510, revid=0x01
domain=0, bus=7, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0144, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x8086, dev=0x3518, revid=0x01
domain=0, bus=7, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pcib5: domain 0
pcib5: secondary bus 9
pcib5: subordinate bus 9
pcib5: no prefetched decode
pci9: <ACPI PCI bus> on pcib5
pci9: domain=0, physical bus=9
pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci7
pcib6: domain 0
pcib6: secondary bus 8
pcib6: subordinate bus 8
pcib6: no prefetched decode
pci8: <ACPI PCI bus> on pcib6
pci8: domain=0, physical bus=8
found-> vendor=0x8086, dev=0x1096, revid=0x01
domain=0, bus=8, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfdfa0000, size 17, enabled
pcib0: allocated type 3 (0xfdf00000-0xfdffffff) for rid 20 of pcib3
pcib3: allocated initial memory window of 0xfdf00000-0xfdffffff
pcib3: allocated memory range (0xfdf00000-0xfdffffff) for rid 20 of pcib4
pcib4: allocated initial memory window of 0xfdf00000-0xfdffffff
pcib4: allocated memory range (0xfdf00000-0xfdffffff) for rid 20 of pcib6
pcib6: allocated initial memory window of 0xfdf00000-0xfdffffff
pcib6: allocated memory range (0xfdfa0000-0xfdfbffff) for rid 10 of pci0:8:0:0
map[18]: type I/O Port, range 32, base 0xe880, size 5, enabled
pcib0: allocated type 4 (0xe000-0xefff) for rid 1c of pcib3
pcib3: allocated initial I/O port window of 0xe000-0xefff
pcib3: allocated I/O port range (0xe000-0xefff) for rid 1c of pcib4
pcib4: allocated initial I/O port window of 0xe000-0xefff
pcib4: allocated I/O port range (0xe000-0xefff) for rid 1c of pcib6
pcib6: allocated initial I/O port window of 0xe000-0xefff
pcib6: allocated I/O port range (0xe880-0xe89f) for rid 18 of pci0:8:0:0
pcib6: matched entry for 8.0.INTA
pcib6: slot 0 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1096, revid=0x01
domain=0, bus=8, slot=0, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfdfe0000, size 17, enabled
pcib6: allocated memory range (0xfdfe0000-0xfdffffff) for rid 10 of pci0:8:0:1
map[18]: type I/O Port, range 32, base 0xec00, size 5, enabled
pcib6: allocated I/O port range (0xec00-0xec1f) for rid 18 of pci0:8:0:1
pcib6: matched entry for 8.0.INTB
pcib6: slot 0 INTB hardwired to IRQ 19
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xe880-0xe89f mem 0xfdfa0000-0xfdfbffff irq 18 at device 0.0 on pci8
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 52
em0: using IRQ 256 for MSI
em0: Using an MSI interrupt
em0: bpf attached
em0: Ethernet address: 00:22:15:31:2a:9c
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xec00-0xec1f mem 0xfdfe0000-0xfdffffff irq 19 at device 0.1 on pci8
em1: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 53
em1: using IRQ 257 for MSI
em1: Using an MSI interrupt
em1: bpf attached
em1: Ethernet address: 00:22:15:31:2a:9d
pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci5
pcib7: domain 0
pcib7: secondary bus 6
pcib7: subordinate bus 6
pcib7: no prefetched decode
pci6: <ACPI PCI bus> on pcib7
pci6: domain=0, physical bus=6
found-> vendor=0x1000, dev=0x0054, revid=0x02
domain=0, bus=6, slot=3, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x40 (16000 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 1 message in map 0x14
map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled
pcib3: attempting to grow I/O port window for (0xd000-0xdfff,0x1000)
front candidate range: 0xd000-0xdfff
pcib3: bus_adjust_resource(0xc000, 0xefff)
pci0: bus_adjust_resource(pcib3, 0x1c, 0xc000, 0xefff)
pcib0: bus_adjust_resource(pcib3, 0x1c, 0xc000, 0xefff)
acpi0: bus_adjust_resource(pcib3, 0x1c, 0xc000, 0xefff)
nexus0: bus_adjust_resource(pcib3, 0x1c, 0xc000, 0xefff)
pcib3: grew I/O port window to 0xc000-0xefff
pcib3: allocated I/O port range (0xd000-0xdfff) for rid 1c of pcib7
pcib7: allocated initial I/O port window of 0xd000-0xdfff
pcib7: allocated I/O port range (0xd000-0xd0ff) for rid 10 of pci0:6:3:0
map[14]: type Memory, range 64, base 0xfdefc000, size 14, enabled
pcib3: attempting to grow memory window for (0xfde00000-0xfdefffff,0x100000)
front candidate range: 0xfde00000-0xfdefffff
pcib3: bus_adjust_resource(0xfde00000, 0xfdffffff)
pci0: bus_adjust_resource(pcib3, 0x20, 0xfde00000, 0xfdffffff)
pcib0: bus_adjust_resource(pcib3, 0x20, 0xfde00000, 0xfdffffff)
acpi0: bus_adjust_resource(pcib3, 0x20, 0xfde00000, 0xfdffffff)
nexus0: bus_adjust_resource(pcib3, 0x20, 0xfde00000, 0xfdffffff)
pcib3: grew memory window to 0xfde00000-0xfdffffff
pcib3: allocated memory range (0xfde00000-0xfdefffff) for rid 20 of pcib7
pcib7: allocated initial memory window of 0xfde00000-0xfdefffff
pcib7: allocated memory range (0xfdefc000-0xfdefffff) for rid 14 of pci0:6:3:0
map[1c]: type Memory, range 64, base 0xfdee0000, size 16, enabled
pcib7: allocated memory range (0xfdee0000-0xfdeeffff) for rid 1c of pci0:6:3:0
pcib7: matched entry for 6.3.INTA
pcib7: slot 3 INTA hardwired to IRQ 26
mpt0: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem 0xfdefc000-0xfdefffff,0xfdee0000-0xfdeeffff irq 26 at device 3.0 on pci6
mpt0: attempting to allocate 1 MSI-X vectors (1 supported)
msi: routing MSI-X IRQ 258 to local APIC 0 vector 54
mpt0: using IRQ 258 for MSI-X
mpt0: MPI Version=1.5.16.0
mpt0: chain depth limited to 34 (from 2040)
mpt0: Maximum Segment Count: 306, Maximum CAM Segment Count: 33
mpt0: MsgLength=20 IOCNumber = 0
mpt0: IOCFACTS: GlobalCredits=286 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 34
mpt0: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK required).
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required).
pci0: <base peripheral> at device 15.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib8: domain 0
pcib8: secondary bus 4
pcib8: subordinate bus 4
pcib8: no prefetched decode
pci4: <ACPI PCI bus> on pcib8
pci4: domain=0, physical bus=4
pcib9: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib9: domain 0
pcib9: secondary bus 3
pcib9: subordinate bus 3
pcib9: no prefetched decode
pci3: <ACPI PCI bus> on pcib9
pci3: domain=0, physical bus=3
found-> vendor=0x8086, dev=0x109a, revid=0x00
domain=0, bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfdae0000, size 17, enabled
pcib0: allocated type 3 (0xfda00000-0xfdafffff) for rid 20 of pcib9
pcib9: allocated initial memory window of 0xfda00000-0xfdafffff
pcib9: allocated memory range (0xfdae0000-0xfdafffff) for rid 10 of pci0:3:0:0
map[18]: type I/O Port, range 32, base 0xcc00, size 5, enabled
pcib9: failed to allocate initial I/O port window (0xc000-0xcfff,0x1000)
pcib9: matched entry for 3.0.INTA
pcib9: slot 0 INTA hardwired to IRQ 18
em2: <Intel(R) PRO/1000 Network Connection 7.3.2> mem 0xfdae0000-0xfdafffff irq 18 at device 0.0 on pci3
em2: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 259 to local APIC 0 vector 55
em2: using IRQ 259 for MSI
em2: Using an MSI interrupt
em2: bpf attached
em2: Ethernet address: 00:22:15:31:27:6a
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib10: domain 0
pcib10: secondary bus 2
pcib10: subordinate bus 2
pcib10: no prefetched decode
pci2: <ACPI PCI bus> on pcib10
pci2: domain=0, physical bus=2
found-> vendor=0x8086, dev=0x109a, revid=0x00
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfd9e0000, size 17, enabled
pcib0: allocated type 3 (0xfd900000-0xfd9fffff) for rid 20 of pcib10
pcib10: allocated initial memory window of 0xfd900000-0xfd9fffff
pcib10: allocated memory range (0xfd9e0000-0xfd9fffff) for rid 10 of pci0:2:0:0
map[18]: type I/O Port, range 32, base 0xbc00, size 5, enabled
pcib0: allocated type 4 (0xb000-0xbfff) for rid 1c of pcib10
pcib10: allocated initial I/O port window of 0xb000-0xbfff
pcib10: allocated I/O port range (0xbc00-0xbc1f) for rid 18 of pci0:2:0:0
pcib10: matched entry for 2.0.INTA
pcib10: slot 0 INTA hardwired to IRQ 19
em3: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xbc00-0xbc1f mem 0xfd9e0000-0xfd9fffff irq 19 at device 0.0 on pci2
em3: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 260 to local APIC 0 vector 56
em3: using IRQ 260 for MSI
em3: Using an MSI interrupt
em3: bpf attached
em3: Ethernet address: 00:22:15:31:28:d1
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x9000-0x901f irq 23 at device 29.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 57
usbus0 on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x9080-0x909f irq 19 at device 29.1 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 58
usbus1 on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfd7ff800-0xfd7ffbff irq 23 at device 29.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: bpf attached
ehci0: usbpf: Attached
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib11: domain 0
pcib11: secondary bus 1
pcib11: subordinate bus 1
pcib11: no prefetched decode
pcib11: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib11
pci1: domain=0, physical bus=1
found-> vendor=0x18ca, dev=0x0020, revid=0x00
domain=0, bus=1, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xf8000000, size 26, enabled
pcib0: allocated type 3 (0xf8000000-0xfbffffff) for rid 24 of pcib11
pcib11: allocated initial prefetch window of 0xf8000000-0xfbffffff
pcib11: allocated prefetch range (0xf8000000-0xfbffffff) for rid 10 of pci0:1:2:0
map[14]: type Memory, range 32, base 0xfd8c0000, size 18, enabled
pcib0: allocated type 3 (0xfd800000-0xfd8fffff) for rid 20 of pcib11
pcib11: allocated initial memory window of 0xfd800000-0xfd8fffff
pcib11: allocated memory range (0xfd8c0000-0xfd8fffff) for rid 14 of pci0:1:2:0
map[18]: type I/O Port, range 32, base 0xac00, size 7, enabled
pcib0: allocated type 4 (0xa000-0xafff) for rid 1c of pcib11
pcib11: allocated initial I/O port window of 0xa000-0xafff
pcib11: allocated I/O port range (0xac00-0xac7f) for rid 18 of pci0:1:2:0
vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem 0xf8000000-0xfbffffff,0xfd8c0000-0xfd8fffff at device 2.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 59
ahci0: <Intel ESB2 AHCI SATA controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x941f mem 0xfd7ffc00-0xfd7fffff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported
ahci0: Caps: 64bit NCQ ALP AL 3Gbps SSC PSC 32cmd 6ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps:
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps:
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps:
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps:
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich4: Caps:
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich5: Caps:
ichsmb0: <Intel 631xESB/6321ESB (ESB2) SMBus controller> port 0x400-0x41f irq 19 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 61
uart1: fast interrupt
acpi0: wakeup code va 0xffffff88c4131000 pa 0x90000
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 3 of orm0
pcib0: allocated type 3 (0xd0000-0xd0fff) for rid 3 of orm0
pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 4 of orm0
pcib0: allocated type 3 (0xd1000-0xd1fff) for rid 4 of orm0
pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 5 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 5 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 5 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 5 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 5 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 5 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 5 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 5 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 5 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 5 of orm0
isab0: found ICH8 or equivalent chipset: Intel 63XXESB watchdog timer
isa_probe_children: disabling PnP devices
ichwd0 on isa0
isab0: found ICH8 or equivalent chipset: Intel 63XXESB watchdog timer
pcib0: allocated type 4 (0x830-0x837) for rid 0 of ichwd0
pcib0: allocated type 4 (0x860-0x87f) for rid 1 of ichwd0
ichwd0: (null) (ICH8 or equivalent)
ichwd0: timer disabled
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
pcib0: allocated type 4 (0xca2-0xca3) for rid 0 of ipmi0
ipmi0: couldn't find it
device_attach: ipmi0 attach returned 6
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
ipmi0: <IPMI System Interface> at port 0xca2-0xca3 on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
pcib0: allocated type 4 (0xca2-0xca3) for rid 0 of ipmi0
ipmi0: couldn't find it
device_attach: ipmi0 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0
pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 62
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Setting TjMax=100
est0: enabling SpeedStep
est0: failed to enable SpeedStep
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp1: Setting TjMax=100
est1: enabling SpeedStep
est1: failed to enable SpeedStep
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp2: Setting TjMax=100
est2: enabling SpeedStep
est2: failed to enable SpeedStep
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp3: Setting TjMax=100
est3: enabling SpeedStep
est3: failed to enable SpeedStep
p4tcc3: <CPU Frequency Thermal Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
coretemp4: Setting TjMax=100
est4: enabling SpeedStep
est4: failed to enable SpeedStep
p4tcc4: <CPU Frequency Thermal Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
coretemp5: Setting TjMax=100
est5: enabling SpeedStep
est5: failed to enable SpeedStep
p4tcc5: <CPU Frequency Thermal Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
coretemp6: Setting TjMax=100
est6: enabling SpeedStep
est6: failed to enable SpeedStep
p4tcc6: <CPU Frequency Thermal Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
coretemp7: Setting TjMax=100
est7: enabling SpeedStep
est7: failed to enable SpeedStep
p4tcc7: <CPU Frequency Thermal Control> on cpu7
Device configuration finished.
linprocfs registered
linsysfs registered
procfs registered
Timecounters tick every 1.000 msec
epair initialized.
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to accept, logging disabled
ipfw0: bpf attached
DUMMYNET 0xfffffe0005e4d800 with IPv6 initialized (100409)
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
lo0: bpf attached
load_dn_sched dn_sched FIFO loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=7f ostat1=7f
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x09 err=0x09 lsb=0x09 msb=0x09
ata0: stat0=0x09 err=0x09 lsb=0x09 msb=0x09
ata0: stat0=0x09 err=0x09 lsb=0x09 msb=0x09
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ata0: stat0=0x09 err=0x09 lsb=0x09 msb=0x09
ata0: stat0=0x09 err=0x09 lsb=0x09 msb=0x09
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x09 err=0x09 lsb=0x09 msb=0x09
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x0a err=0x0a lsb=0x0a msb=0x0a
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x0
ahcich0: AHCI reset...
ahcich0: SATA connect timeout time=10000us status=00000000
ahcich0: AHCI reset: device not found
ahcich1: AHCI reset...
ahcich1: SATA connect timeout time=10000us status=00000000
ahcich1: AHCI reset: device not found
ahcich2: AHCI reset...
ahcich2: SATA connect timeout time=10000us status=00000000
ahcich2: AHCI reset: device not found
ahcich3: AHCI reset...
ahcich3: SATA connect timeout time=10000us status=00000000
ahcich3: AHCI reset: device not found
ahcich4: AHCI reset...
ahcich4: SATA connect timeout time=10000us status=00000000
ahcich4: AHCI reset: device not found
ahcich5: AHCI reset...
ahcich5: SATA connect timeout time=10000us status=00000000
ahcich5: AHCI reset: device not found
uhub2: 4 ports with 4 removable, self powered
ugen0.2: <Avocent> at usbus0
ukbd0: <EP1 Interrupt> on usbus0
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: <EP2 Interrupt> on usbus0
GEOM: new disk da0
da0 at mpt0 bus 0 scbus0 target 4 lun 0
da0: <ATA ST3500320NS SN06> Fixed Direct Access SCSI-5 device
da0: Serial Number 9QMBZSA0
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da1 at mpt0 bus 0 scbus0 target 5 lun 0
da1: <ATA WDC WD5003ABYX-0 1S01> Fixed Direct Access SCSI-5 device
da1: Serial Number WD-WMAYP0682627
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
GEOM: new disk da1
pass0 at mpt0 bus 0 scbus0 target 4 lun 0
pass0: <ATA ST3500320NS SN06> Fixed Direct Access SCSI-5 device
pass0: Serial Number 9QMBZSA0
pass0: 300.000MB/s transfers
pass0: Command Queueing enabled
pass1 at mpt0 bus 0 scbus0 target 5 lun 0
pass1: <ATA WDC WD5003ABYX-0 1S01> Fixed Direct Access SCSI-5 device
pass1: Serial Number WD-WMAYP0682627
pass1: 300.000MB/s transfers
pass1: Command Queueing enabled
da2 at mpt0 bus 0 scbus0 target 6 lun 0
da2: <ATA WDC WD5003ABYX-0 1S01> Fixed Direct Access SCSI-5 device
da2: Serial Number WD-WMAYP0679546
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
da3 at mpt0 bus 0 scbus0 target 7 lun 0
da3: <ATA ST3500320NS SN06> Fixed Direct Access SCSI-5 device
da3: Serial Number 9QMC1X7Z
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
pass2 at mpt0 bus 0 scbus0 target 6 lun 0
pass2: <ATA WDC WD5003ABYX-0 1S01> Fixed Direct Access SCSI-5 device
pass2: Serial Number WD-WMAYP0679546
pass2: 300.000MB/s transfers
pass2: Command Queueing enabled
pass3 at mpt0 bus 0 scbus0 target 7 lun 0
pass3: <ATA ST3500320NS SN06> Fixed Direct Access SCSI-5 device
pass3: Serial Number 9QMC1X7Z
pass3: 300.000MB/s transfers
pass3: Command Queueing enabled
ums0: 5 buttons and [XYZ] coordinates ID=1
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 2 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 3 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 4 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 5 vector 48
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 6 vector 48
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 7 vector 48
msi: Assigning MSI IRQ 257 to local APIC 1 vector 49
msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 49
msi: Assigning MSI IRQ 259 to local APIC 3 vector 49
msi: Assigning MSI IRQ 260 to local APIC 4 vector 49
SMP: passed TSC synchronization test
TSC timecounter discards lower 8 bit(s)
Timecounter "TSC-low" frequency 11040257 Hz quality 1000
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/40/0x67<INT,USR,SYS,REA,WRI>
More information about the freebsd-stable
mailing list