Marvel 88SE9480

[Michael Butler]

On 01/20/12 17:19, Mike Tancsa wrote:
> Hi,
> 
> I tried this new controller
> http://www.addonics.com/products/ad2ms6gpx8.php
> which is based on the 88SE9480 chipset.  Does anyone have it working ?
> 
> I tried adding the PCI ID, but it does not attach unfortunately.
> 
> {0x94801b4b, 0x00, "Addonics",      AHCI_Q_NOBSYRES},
> 
> ahci0: <Addonics AHCI SATA controller> mem
> 0x48140000-0x4815ffff,0x48100000-0x4813ffff irq 16 at device 0.0 on pci1
> device_attach: ahci0 attach returned 6
> 
> pciconf shows
> 
> ahci0 at pci0:1:0:0:       class=0x010400 card=0x94801b4b chip=0x94801b4b
> rev=0x03 hdr=0x00
>     vendor     = 'Marvell Technology Group Ltd.'
>     class      = mass storage
>     subclass   = RAID
>     bar   [10] = type Memory, range 64, base 0x48140000, size 131072,
> enabled
>     bar   [18] = type Memory, range 64, base 0x48100000, size 262144,
> enabled
>     cap 01[40] = powerspec 3  supports D0 D1 D3  current D0
>     cap 05[50] = MSI supports 1 message, 64 bit
>     cap 10[70] = PCI-Express 2 endpoint max data 128(4096) link x8(x8)
> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
> ecap 0002[140] = VC 1 max VC0
> 
> This was with today's RELENG_9

I'm concerned about these memory ranges - how much RAM is in this thing?

	imb