Marvel 88SE9480

[Mike Tancsa]

Hi,

I tried this new controller
http://www.addonics.com/products/ad2ms6gpx8.php
which is based on the 88SE9480 chipset.  Does anyone have it working ?

I tried adding the PCI ID, but it does not attach unfortunately.

{0x94801b4b, 0x00, "Addonics",      AHCI_Q_NOBSYRES},

ahci0: <Addonics AHCI SATA controller> mem
0x48140000-0x4815ffff,0x48100000-0x4813ffff irq 16 at device 0.0 on pci1
device_attach: ahci0 attach returned 6

pciconf shows

ahci0 at pci0:1:0:0:       class=0x010400 card=0x94801b4b chip=0x94801b4b
rev=0x03 hdr=0x00
    vendor     = 'Marvell Technology Group Ltd.'
    class      = mass storage
    subclass   = RAID
    bar   [10] = type Memory, range 64, base 0x48140000, size 131072,
enabled
    bar   [18] = type Memory, range 64, base 0x48100000, size 262144,
enabled
    cap 01[40] = powerspec 3  supports D0 D1 D3  current D0
    cap 05[50] = MSI supports 1 message, 64 bit
    cap 10[70] = PCI-Express 2 endpoint max data 128(4096) link x8(x8)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0002[140] = VC 1 max VC0

This was with today's RELENG_9

	---Mike

-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/