9.0-Release and Asus P5-NE motherboard
Matthieu Volat
mazhe at alkumuna.eu
Fri Jan 20 13:21:37 UTC 2012
Hello,
For a week, I have been trying to boot the FreeBSD 9 installation media (usb, cdrom) on a computer with an Asus P5-NE motherboard (amd64, nvidia MCP51 controller), but the kernel fails to initialize correctly.
Using the verbose mode, I was able to capture the following warnings/errors :
ahcich0: AHCI reset...
ugen0.1: <nVidia> at usbu0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbu1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ahacih0: SATA connect timeout time=10000us status=00000000
ahacih0: AHCI reset: device not found
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x30000
(aprobe0:ata0:0:0:0): SIGNATURE: eb14
ata1: reset tp1 mask=03 ostat0=60 ostat1=70
ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata2: SATA connect time=0ms status=00000123
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
(aprobe1:ata2:0:0:0): SIGNATURE: 0000
ata3: SATA connect time=0ms status=00000123
ata3: reset tp1 mask=01 ostat0=50 ostat1=00
uhub0: 8 ports with 8 removable, self powered
ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata3: reset tp2 stat0=50 stat1=00 devices=0x1
(aprobe2:ata3:0:0:0): SIGNATURE: 0000
ata4: SATA connect timeout status=0000000
ata5: SATA connect timeout status=0000000
uhub1: 8 ports with 8 removable, self powered
usb_alloc_device: net address 2 failed (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00
ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00
ata3: stat0=0xd8 err=0x00 lsb=0x00 msb=0x00
[message repeated a lot of times]
ata3: reset tp2 stat0=d8 stat1=00 devices=0x0
(aprobe2:ata3:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
(aprobe2:ata3:0:0:0): CAM status: Command timeout
ata0: reset tp1 mask=03 ostat0=58 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x30000
(aprobe0:ata0:0:0:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata0:0:0:0): CAM status: Command timeout
(aprobe0:ata0:0:1:0): SIGNATURE: eb14
ata2: SATA connect time=0ms status=00000123
ata2: reset tp1 mask=01 ostat0=58 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
(aprobe1:ata:ata2:0:0:0) ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 00 00
(aprobe1:ata:ata2:0:0:0) CAM status: Command timeout
run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config
ugen1.2: <Unknown> at usbus1 (disconnected)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_TIMEOUT, ignored)
ata0: reset tp1 mask=03 ostat0=00 ostat1=58
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x30000
(aprobe0:ata0:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00 00 00 00
(aprobe0:ata0:0:1:0): CAM status: Command timeout
run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config
This machine worked (and still works) fine with 8.2... If somebody have an idea...
--
Matthieu Volat <mazhe at alkumuna.eu>
More information about the freebsd-stable
mailing list