siisch1: Error while READ LOG EXT
Mike Tancsa
mike at sentex.net
Thu Feb 9 01:08:38 UTC 2012
On 2/8/2012 4:27 PM, Jeremy Chadwick wrote:
>
> This indicates the controller on channel 1 (siisch1) is "stalled"
> waiting for underlying communication with the device attached to it.
Hi,
But which device ? the PM itself, or the disks behind it ? And which disk ?
>
>
> This is almost certainly a lower level problem with the disk that cannot
> be addressed/solved via normal means. Thus, my recommendation is to
> replace the disk.
I would gladly replace it if I knew which one :)
>
> Regarding the repeated errors at semi-regular (but not entirely)
> intervals: are you using smartd? Do you have a cronjob that issues
> smartctl -a or smartctl -x commands at intervals? I imagine any of
> these could be tickling something lower level.
Dont have smartd running. The box takes a lot of backups as well as a constant stream of netflow data, so a lot of writes to it.
>
> Also, please upgrade your smartmontools to 5.42. It does provide some
> further enhancements that are useful.
>
Done.
# smartctl -x /dev/ada9
smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.2-STABLE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST31000333AS
Serial Number: 9TE14SRV
LU WWN Device Id: 5 000c50 010a39664
Firmware Version: SD35
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Feb 8 20:00:47 2012 EST
==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207951
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207957
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 203) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 112 099 006 - 44490692
3 Spin_Up_Time PO---- 093 092 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 68
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 2
7 Seek_Error_Rate POSR-- 088 060 030 - 791764702
9 Power_On_Hours -O--CK 075 075 000 - 22759
10 Spin_Retry_Count PO--C- 100 100 097 - 2
12 Power_Cycle_Count -O--CK 100 100 020 - 68
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 095 095 000 - 5
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 001 001 000 - 961
190 Airflow_Temperature_Cel -O---K 066 056 045 - 34 (Min/Max 33/37)
194 Temperature_Celsius -O---K 034 044 000 - 34 (0 25 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 050 030 000 - 44490692
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log]
GP/S Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
GP/S Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log]
GP/S Log at address 0x06 has 1 sectors [SMART self-test log]
GP/S Log at address 0x07 has 1 sectors [Extended self-test log]
GP/S Log at address 0x09 has 1 sectors [Selective self-test log]
GP/S Log at address 0x10 has 1 sectors [NCQ Command Error log]
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x21 has 1 sectors [Write stream error log]
GP/S Log at address 0x22 has 1 sectors [Read stream error log]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xa1 has 20 sectors [Device vendor specific log]
GP Log at address 0xa2 has 2248 sectors [Device vendor specific log]
GP/S Log at address 0xa8 has 20 sectors [Device vendor specific log]
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
GP Log at address 0xb0 has 2819 sectors [Device vendor specific log]
GP Log at address 0xbe has 65535 sectors [Device vendor specific log]
GP Log at address 0xbf has 65535 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 5
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 [4] occurred at disk power-on lifetime: 18292 hours (762 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 4d 08 00 db 10 00 00 Error: UNC at LBA = 0x4d0800db10 = 330846755600
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 1a 00 19 72 00 2f a2 40 00 11d+02:29:18.542 READ FPDMA QUEUED
60 00 00 00 1a 00 19 3e 00 2d 83 40 00 11d+02:29:18.542 READ FPDMA QUEUED
60 00 00 00 1b 00 19 38 00 2a 07 40 00 11d+02:29:18.541 READ FPDMA QUEUED
60 00 00 00 19 00 19 35 00 2a 2b 40 00 11d+02:29:18.541 READ FPDMA QUEUED
60 00 00 00 1c 00 19 b4 00 28 ec 40 00 11d+02:29:18.541 READ FPDMA QUEUED
Error 4 [3] occurred at disk power-on lifetime: 18292 hours (762 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 4d 08 00 db 10 00 00 Error: UNC at LBA = 0x4d0800db10 = 330846755600
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 1a 00 19 72 00 2f a2 40 00 11d+02:29:15.783 READ FPDMA QUEUED
60 00 00 00 1a 00 19 3e 00 2d 83 40 00 11d+02:29:15.780 READ FPDMA QUEUED
60 00 00 00 1b 00 19 38 00 2a 07 40 00 11d+02:29:15.732 READ FPDMA QUEUED
60 00 00 00 19 00 19 35 00 2a 2b 40 00 11d+02:29:15.732 READ FPDMA QUEUED
60 00 00 00 1c 00 19 b4 00 28 ec 40 00 11d+02:29:15.731 READ FPDMA QUEUED
Error 3 [2] occurred at disk power-on lifetime: 18292 hours (762 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 4d 08 00 db 10 00 00 Error: UNC at LBA = 0x4d0800db10 = 330846755600
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 1b 00 19 38 00 2a 07 40 00 11d+02:29:12.889 READ FPDMA QUEUED
60 00 00 00 19 00 19 35 00 2a 2b 40 00 11d+02:29:12.889 READ FPDMA QUEUED
60 00 00 00 1c 00 19 b4 00 28 ec 40 00 11d+02:29:12.888 READ FPDMA QUEUED
60 00 00 00 1c 00 4d 4f 00 e3 b5 40 00 11d+02:29:12.888 READ FPDMA QUEUED
60 00 00 00 1a 00 4d 07 00 db fc 40 00 11d+02:29:12.888 READ FPDMA QUEUED
Error 2 [1] occurred at disk power-on lifetime: 18292 hours (762 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 4d 08 00 db 10 00 00 Error: UNC at LBA = 0x4d0800db10 = 330846755600
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 1b 00 19 38 00 2a 07 40 00 11d+02:29:10.011 READ FPDMA QUEUED
60 00 00 00 19 00 19 35 00 2a 2b 40 00 11d+02:29:10.011 READ FPDMA QUEUED
60 00 00 00 1c 00 19 b4 00 28 ec 40 00 11d+02:29:10.010 READ FPDMA QUEUED
60 00 00 00 1c 00 4d 4f 00 e3 b5 40 00 11d+02:29:10.010 READ FPDMA QUEUED
60 00 00 00 1a 00 4d 07 00 db fc 40 00 11d+02:29:10.010 READ FPDMA QUEUED
Error 1 [0] occurred at disk power-on lifetime: 18292 hours (762 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 4d 08 00 db 10 00 00 Error: UNC at LBA = 0x4d0800db10 = 330846755600
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 00 00 1b 00 19 38 00 2a 07 40 00 11d+02:29:07.148 READ FPDMA QUEUED
60 00 00 00 19 00 19 35 00 2a 2b 40 00 11d+02:29:07.140 READ FPDMA QUEUED
60 00 00 00 1c 00 19 b4 00 28 ec 40 00 11d+02:29:07.131 READ FPDMA QUEUED
60 00 00 00 1c 00 4d 4f 00 e3 b5 40 00 11d+02:29:07.117 READ FPDMA QUEUED
60 00 00 00 35 00 4d c0 00 e0 09 40 00 11d+02:29:07.111 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 33/37 Celsius
Lifetime Min/Max Temperature: 25/44 Celsius
Under/Over Temperature Limit Count: 0/10423
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (24)
Index Estimated Time Temperature Celsius
25 2012-02-08 17:53 35 ****************
... ..( 53 skipped). .. ****************
79 2012-02-08 18:47 35 ****************
80 2012-02-08 18:48 34 ***************
... ..( 71 skipped). .. ***************
24 2012-02-08 20:00 34 ***************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
smartctl -l gplog,0x10 /dev/ada9
smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.2-STABLE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
General Purpose Log 0x10 [NCQ Command Error log], Page 0-0 (of 1)
0000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0000190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
0(backup3)# smartctl -l sataphy /dev/ada9
smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.2-STABLE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0(backup3)# smartctl -l sataphy /dev/ada10
smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.2-STABLE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 11 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0(backup3)# smartctl -l sataphy /dev/ada11
smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.2-STABLE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 12 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0(backup3)# smartctl -l sataphy /dev/ada12
smartctl 5.42 2011-10-20 r3458 [FreeBSD 8.2-STABLE amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x8000 4 625971 Vendor specific
0(backup3)#
---Mike
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
More information about the freebsd-stable
mailing list