mfi timeouts

Jan Mikkelsen janm at transactionware.com
Mon Nov 14 08:03:48 UTC 2011


Hi,

I have just tested mfi on a machine that has just arrived. I'm seeing the command timeout problem on boot with 9.0-RC1.

The message is "mfi0: COMMAND <addr> TIMEOUT AFTER 59 seconds", and then repeats every 30 seconds (with the time changed, obviously).

I have tested the 9.0-RC1 ISO, a 9-stable kernel patched with the patch from the PR I referenced below (also in FreeBSD cvs in revision 1.62 of src/sys/dev/mfi/mfi.c), and 9-stable kernel with the patch at www.freebsd.org/~jhb/patches/mfi.patch with the 'pci_alloc_msix' call changed to 'pci_alloc_msi'.

I'm setting up a test with the pci_alloc_msix call unchanged at the moment, but I don't have anything in /boot/loader.conf, so that I'm not expecting that to make a difference.

This is on a Supermicro X8DTi-F, 48GB memory and an LSI MegaRAID 9261-8i.

8.2-RELEASE boots fine, dmesg and some output from mfiutil below.

Any suggestions gratefully received!

Thanks,

Jan Mikkelsen


On 09/11/2011, at 10:39 AM, Vincent Hoffman wrote:

> On 08/11/2011 22:24, Vincent Hoffman wrote:
>> On 08/11/2011 19:50, John Baldwin wrote:
>>> On Wednesday, November 02, 2011 5:47:38 pm Vincent Hoffman wrote:
>>>> On 28/10/2011 04:14, Jan Mikkelsen wrote:
>>>>> Hi,
>>>>> 
>>>>> There is a patch linked to from this PR, which seems very similar:
>>>>> 
>>>>> http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/140416
>>>>> 
>>>>> http://lists.freebsd.org/pipermail/freebsd-scsi/2011-March/004839.html
>>>>> 
>>>>> The problem is also consistent with running mfiutil clearing the problem.
>>>>> 
>>>>> I'm about to deploy mfi controllers in a similar configuration, so I'd be 
>>> very curious about whether the patch fixes the problem for you.
>>>> The patch you linked to seems to have removed the stalls, although I
>>>> have only had it running for a day. I'll post if it stalls again though.
>>>> 
>>>> I did manage to scrounge the use of a Dell r410 with a
>>>> LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
>>>> Badged as Dell PERC H700 Adapter
>>>> 
>>>> to test out the patch I originally found but had the same issue as this post
>>>> 
>>>> http://lists.freebsd.org/pipermail/freebsd-stable/2011-September/063821.html
>>>> 
>>>> 
>>>> I couldnt get the dell to stall in the first place either though so it
>>>> could be a specific firmware version that the issue.
>>>> 
>>>> Anyway thanks for the pointers.
>>> Hmm, did you try the patch I had posted from that earlier thread?  It had
>>> two changes in it, one was similar to the patch in the PR, the second added
>>> MSI-X support.  I've since tweaked it to make the MSI-X support off by
>>> default but possible to enable via loader.conf.  Would you be willing to
>>> try the updated patch at www.freebsd.org/~jhb/patches/mfi.patch?
>> Hi,
>> yes I tried the patch you posted originally, unfortunately the dell
>> never finished booting either. The Supermicro is now in production but
>> I'll take the dell up to 9-STABLE and try your updated patch.
>> 
> The patch didnt apply quite cleanly for 9-STABLE, 1 reject as it had
> already been applied.
> 
> I have rebooted the dell and it seems happy with the new patch (msi
> disabled.)
> Booting with
> hw.mfi.msix=1 in /boot/loader.conf causes the timeouts again and stops
> the boot from completing.
> I can give root access to the machine if this would be helpful, I cant
> give KVM access though unfortunately.
> (but can look in from time to time if needed.)
> 
> 
> Vince

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #0: Thu May 26 14:33:45 EST 2011
    root at valhalla.transactionware.com:/home/janm/p4/freebsd-image-std-2008.2/work/base-freebsd/home/janm/p4/freebsd-image-std-2008.2/FreeBSD/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           E5645  @ 2.40GHz (2409.70-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206c2  Family = 6  Model = 2c  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ee3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 51543801856 (49156 MB)
avail memory = 49664753664 (47364 MB)
ACPI APIC Table: <SUPERM APIC1519>
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
 cpu4 (AP): APIC ID:  4
 cpu5 (AP): APIC ID:  5
 cpu6 (AP): APIC ID: 16
 cpu7 (AP): APIC ID: 17
 cpu8 (AP): APIC ID: 18
 cpu9 (AP): APIC ID: 19
 cpu10 (AP): APIC ID: 20
 cpu11 (AP): APIC ID: 21
 cpu12 (AP): APIC ID: 32
 cpu13 (AP): APIC ID: 33
 cpu14 (AP): APIC ID: 34
 cpu15 (AP): APIC ID: 35
 cpu16 (AP): APIC ID: 36
 cpu17 (AP): APIC ID: 37
 cpu18 (AP): APIC ID: 48
 cpu19 (AP): APIC ID: 49
 cpu20 (AP): APIC ID: 50
 cpu21 (AP): APIC ID: 51
 cpu22 (AP): APIC ID: 52
 cpu23 (AP): APIC ID: 53
ioapic1: Changing APIC ID to 7
ioapic2: Changing APIC ID to 8
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: <SMCI > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 400, 100 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x4C, should be 0x49 (20101013/tbutils-354)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
cpu20: <ACPI CPU> on acpi0
cpu21: <ACPI CPU> on acpi0
cpu22: <ACPI CPU> on acpi0
cpu23: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 2.0.7> port 0xec00-0xec1f mem 0xfafe0000-0xfaffffff,0xfafc0000-0xfafdffff,0xfaf9c000-0xfaf9ffff irq 28 at device 0.0 on pci1
igb0: Using MSIX interrupts with 9 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:25:90:62:20:3e
igb1: <Intel(R) PRO/1000 Network Connection version - 2.0.7> port 0xe800-0xe81f mem 0xfaf60000-0xfaf7ffff,0xfaf40000-0xfaf5ffff,0xfaf98000-0xfaf9bfff irq 40 at device 0.1 on pci1
igb1: Using MSIX interrupts with 9 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:25:90:62:20:3f
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xcf80-0xcf9f irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xcf40-0xcf5f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xcf20-0xcf3f irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfaefc000-0xfaefc3ff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xcf00-0xcf1f irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xcec0-0xcedf irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xcea0-0xcebf irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfaeda000-0xfaeda3ff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vgapci0: <VGA-compatible display> mem 0xf9000000-0xf9ffffff,0xfbefc000-0xfbefffff,0xfb000000-0xfb7fffff irq 16 at device 4.0 on pci6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0xcff0-0xcff7,0xcf7c-0xcf7f,0xcfe0-0xcfe7,0xcef4-0xcef7,0xcfa0-0xcfaf,0xcf60-0xcf6f irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH10 SATA300 controller> port 0xcee0-0xcee7,0xcef0-0xcef3,0xce70-0xce77,0xce7c-0xce7f,0xce60-0xce6f,0xce40-0xce4f irq 19 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
pcib7: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib7
pcib8: <PCI-PCI bridge> at device 0.0 on pci128
pci129: <PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 1.0 on pci128
pci130: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 3.0 on pci128
pci131: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 5.0 on pci128
pci132: <ACPI PCI bus> on pcib11
mfi0: <LSI MegaSAS Gen2> port 0xf800-0xf8ff mem 0xf8f9c000-0xf8f9ffff,0xf8fc0000-0xf8ffffff irq 50 at device 0.0 on pci132
mfi0: Megaraid SAS driver Ver 3.00 
mfi0: 2061 (374583936s/0x0020/info) - Shutdown command received from host
mfi0: 2062 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/9263/1000)
mfi0: 2063 (boot + 4s/0x0020/info) - Firmware version 2.120.183-1415
mfi0: 2064 (boot + 9s/0x0008/info) - Battery Present
mfi0: 2065 (boot + 9s/0x0020/info) - Package version 12.12.0-0073
mfi0: 2066 (boot + 9s/0x0020/info) - Board Revision 15A
mfi0: 2067 (boot + 44s/0x0002/info) - Inserted: PD 0c(e0xff/s3)
mfi0: 2068 (boot + 44s/0x0002/info) - Inserted: PD 0c(e0xff/s3) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000
mfi0: 2069 (boot + 44s/0x0002/info) - Inserted: PD 0d(e0xff/s0)
mfi0: 2070 (boot + 44s/0x0002/info) - Inserted: PD 0d(e0xff/s0) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=4433221103000000,0000000000000000
mfi0: 2071 (boot + 44s/0x0002/info) - Inserted: PD 0e(e0xff/s1)
mfi0: 2072 (boot + 44s/0x0002/info) - Inserted: PD 0e(e0xff/s1) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=4433221102000000,0000000000000000
mfi0: 2073 (boot + 44s/0x0002/info) - Inserted: PD 0f(e0xff/s2)
mfi0: 2074 (boot + 44s/0x0002/info) - Inserted: PD 0f(e0xff/s2) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=4433221101000000,0000000000000000
mfi0: 2075 (boot + 44s/0x0002/info) - Inserted: PD 10(e0xff/s7)
mfi0: 2076 (boot + 44s/0x0002/info) - Inserted: PD 10(e0xff/s7) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=4433221104000000,0000000000000000
mfi0: 2077 (boot + 44s/0x0002/info) - Inserted: PD 11(e0xff/s6)
mfi0: 2078 (boot + 44s/0x0002/info) - Inserted: PD 11(e0xff/s6) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=4433221105000000,0000000000000000
mfi0: 2079 (boot + 44s/0x0002/info) - Inserted: PD 12(e0xff/s4)
mfi0: 2080 (boot + 44s/0x0002/info) - Inserted: PD 12(e0xff/s4) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=4433221107000000,0000000000000000
mfi0: 2081 (boot + 44s/0x0002/info) - Inserted: PD 13(e0xff/s5)
mfi0: 2082 (boot + 44s/0x0002/info) - Inserted: PD 13(e0xff/s5) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=4433221106000000,0000000000000000
mfi0: 2083 (374610308s/0x0020/info) - Time established as 11/14/11 18:25:08; (51 seconds since power on)
mfi0: 2084 (374610326s/0x0008/info) - Battery temperature is normal
mfi0: 2085 (374610362s/0x0020/info) - Patrol Read resumed
mfi0: 2086 (374610392s/0x0020/info) - Host driver is loaded and operational
mfi0: 2089 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/9263/1000)
mfi0: 2090 (boot + 4s/0x0020/info) - Firmware version 2.120.183-1415
mfi0: 2091 (boot + 9s/0x0008/info) - Battery Present
mfi0: 2092 (boot + 9s/0x0020/info) - Package version 12.12.0-0073
mfi0: 2093 (boot + 9s/0x0020/info) - Board Revision 15A
mfi0: 2094 (boot + 28s/0x0002/info) - Inserted: PD 0c(e0xff/s3)
mfi0: 2095 (boot + 28s/0x0002/info) - Inserted: PD 0c(e0xff/s3) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000
mfi0: 2096 (boot + 28s/0x0002/info) - Inserted: PD 0d(e0xff/s0)
mfi0: 2097 (boot + 28s/0x0002/info) - Inserted: PD 0d(e0xff/s0) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=4433221103000000,0000000000000000
mfi0: 2098 (boot + 28s/0x0002/info) - Inserted: PD 0e(e0xff/s1)
mfi0: 2099 (boot + 28s/0x0002/info) - Inserted: PD 0e(e0xff/s1) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=4433221102000000,0000000000000000
mfi0: 2100 (boot + 28s/0x0002/info) - Inserted: PD 0f(e0xff/s2)
mfi0: 2101 (boot + 28s/0x0002/info) - Inserted: PD 0f(e0xff/s2) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=4433221101000000,0000000000000000
mfi0: 2102 (boot + 28s/0x0002/info) - Inserted: PD 10(e0xff/s7)
mfi0: 2103 (boot + 28s/0x0002/info) - Inserted: PD 10(e0xff/s7) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=4433221104000000,0000000000000000
mfi0: 2104 (boot + 28s/0x0002/info) - Inserted: PD 11(e0xff/s6)
mfi0: 2105 (boot + 28s/0x0002/info) - Inserted: PD 11(e0xff/s6) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=4433221105000000,0000000000000000
mfi0: 2106 (boot + 28s/0x0002/info) - Inserted: PD 12(e0xff/s4)
mfi0: 2107 (boot + 28s/0x0002/info) - Inserted: PD 12(e0xff/s4) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=4433221107000000,0000000000000000
mfi0: 2108 (boot + 28s/0x0002/info) - Inserted: PD 13(e0xff/s5)
mfi0: 2109 (boot + 28s/0x0002/info) - Inserted: PD 13(e0xff/s5) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=4433221106000000,0000000000000000
mfi0: 2110 (374610516s/0x0020/info) - Time established as 11/14/11 18:28:36; (35 seconds since power on)
mfi0: 2111 (374610550s/0x0008/info) - Battery temperature is normal
mfi0: 2112 (374610570s/0x0020/info) - Patrol Read resumed
mfi0: 2115 (374610602s/0x0020/info) - Host driver is loaded and operational
mfi0: 2116 (boot + 4s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/9263/1000)
mfi0: 2117 (boot + 4s/0x0020/info) - Firmware version 2.120.183-1415
mfi0: 2118 (boot + 9s/0x0008/info) - Battery Present
mfi0: 2119 (boot + 9s/0x0020/info) - Package version 12.12.0-0073
mfi0: 2120 (boot + 9s/0x0020/info) - Board Revision 15A
mfi0: 2121 (boot + 44s/0x0002/info) - Inserted: PD 0c(e0xff/s3)
mfi0: 2122 (boot + 44s/0x0002/info) - Inserted: PD 0c(e0xff/s3) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000
mfi0: 2123 (boot + 44s/0x0002/info) - Inserted: PD 0d(e0xff/s0)
mfi0: 2124 (boot + 44s/0x0002/info) - Inserted: PD 0d(e0xff/s0) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=4433221103000000,0000000000000000
mfi0: 2125 (boot + 44s/0x0002/info) - Inserted: PD 0e(e0xff/s1)
mfi0: 2126 (boot + 44s/0x0002/info) - Inserted: PD 0e(e0xff/s1) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=4433221102000000,0000000000000000
mfi0: 2127 (boot + 44s/0x0002/info) - Inserted: PD 0f(e0xff/s2)
mfi0: 2128 (boot + 44s/0x0002/info) - Inserted: PD 0f(e0xff/s2) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=4433221101000000,0000000000000000
mfi0: 2129 (boot + 44s/0x0002/info) - Inserted: PD 10(e0xff/s7)
mfi0: 2130 (boot + 44s/0x0002/info) - Inserted: PD 10(e0xff/s7) Info: enclPd=ffff, scsiType=0, portMap=05, sasAddr=4433221104000000,0000000000000000
mfi0: 2131 (boot + 44s/0x0002/info) - Inserted: PD 11(e0xff/s6)
mfi0: 2132 (boot + 44s/0x0002/info) - Inserted: PD 11(e0xff/s6) Info: enclPd=ffff, scsiType=0, portMap=04, sasAddr=4433221105000000,0000000000000000
mfi0: 2133 (boot + 44s/0x0002/info) - Inserted: PD 12(e0xff/s4)
mfi0: 2134 (boot + 44s/0x0002/info) - Inserted: PD 12(e0xff/s4) Info: enclPd=ffff, scsiType=0, portMap=07, sasAddr=4433221107000000,0000000000000000
mfi0: 2135 (boot + 44s/0x0002/info) - Inserted: PD 13(e0xff/s5)
mfi0: 2136 (boot + 44s/0x0002/info) - Inserted: PD 13(e0xff/s5) Info: enclPd=ffff, scsiType=0, portMap=06, sasAddr=4433221106000000,0000000000000000
mfi0: 2137 (374610911s/0x0020/info) - Time established as 11/14/11 18:35:11; (52 seconds since power on)
mfi0: 2138 (374610928s/0x0008/info) - Battery temperature is normal
mfi0: 2139 (374610964s/0x0020/info) - Patrol Read resumed
mfi0: [ITHREAD]
pcib12: <ACPI PCI-PCI bridge> at device 7.0 on pci128
pci133: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 9.0 on pci128
pci134: <ACPI PCI bus> on pcib13
pci128: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci128: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci128: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci128: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci128: <base peripheral> at device 22.0 (no driver attached)
pci128: <base peripheral> at device 22.1 (no driver attached)
pci128: <base peripheral> at device 22.2 (no driver attached)
pci128: <base peripheral> at device 22.3 (no driver attached)
pci128: <base peripheral> at device 22.4 (no driver attached)
pci128: <base peripheral> at device 22.5 (no driver attached)
pci128: <base peripheral> at device 22.6 (no driver attached)
pci128: <base peripheral> at device 22.7 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
qpi0: <QPI system bus> on motherboard
pcib14: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib14
pcib15: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci254: <PCI bus> on pcib15
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
est16: <Enhanced SpeedStep Frequency Control> on cpu16
p4tcc16: <CPU Frequency Thermal Control> on cpu16
est17: <Enhanced SpeedStep Frequency Control> on cpu17
p4tcc17: <CPU Frequency Thermal Control> on cpu17
est18: <Enhanced SpeedStep Frequency Control> on cpu18
p4tcc18: <CPU Frequency Thermal Control> on cpu18
est19: <Enhanced SpeedStep Frequency Control> on cpu19
p4tcc19: <CPU Frequency Thermal Control> on cpu19
est20: <Enhanced SpeedStep Frequency Control> on cpu20
p4tcc20: <CPU Frequency Thermal Control> on cpu20
est21: <Enhanced SpeedStep Frequency Control> on cpu21
p4tcc21: <CPU Frequency Thermal Control> on cpu21
est22: <Enhanced SpeedStep Frequency Control> on cpu22
p4tcc22: <CPU Frequency Thermal Control> on cpu22
est23: <Enhanced SpeedStep Frequency Control> on cpu23
p4tcc23: <CPU Frequency Thermal Control> on cpu23
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
acd0: DVDR <ATAPI iHAS124 B/AL0Q> at ata2-master UDMA100 SATA 1.5Gb/s
mfi0: 2142 (374610993s/0x0020/info) - Host driver is loaded and operational
mfid0: <MFI Logical Disk> on mfi0
mfid0: 511999MB (1048575744 sectors) RAID volume '' is optimal
SMP: AP CPU #1 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #20 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #22 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #23 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #21 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #17 Launched!
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Trying to mount root from cd9660:/dev/acd0
ugen4.2: <DELL> at usbus4
ukbd0: <DELL Dell QuietKey Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus4
kbd2 at ukbd0
ugen1.2: <American Megatrends Inc.> at usbus1
ukbd1: <Keyboard Interface> on usbus1
kbd3 at ukbd1
ums0: <Mouse Interface> on usbus1
igb0: link state changed to DOWN
igb0: link state changed to UP

mfiutil show adapter:

mfi0 Adapter:
    Product Name: LSI MegaRAID SAS 9261-8i
   Serial Number: SV13605705
        Firmware: 12.12.0-0073
     RAID Levels: JBOD, RAID0, RAID1, RAID5, RAID6, RAID10, RAID50
  Battery Backup: present
           NVRAM: 32K
  Onboard Memory: 512M
  Minimum Stripe: 8K
  Maximum Stripe: 1M

mfiutil show firmware:

mfi0 Firmware Package Version: 12.12.0-0073
mfi0 Firmware Images:
Name  Version                        Date         Time         Status
APP   2.120.183-1415                 Oct 05 2011  12:32:12     active
BIOS  3.23.00_4.11.05.00_0x05080000   9/15/2011
   9/15/2011
  active
PCLI  04.04-018:#%00008              Aug 05 2011  18:14:00     active
BCON  6.0-45-e_40-Rel                Sep 26 2011  09:55:15     active
NVDT  2.09.03-0024                   Oct 05 2011  00:43:21     active
BTBL  2.02.00.00-0000                Sep 16 2009  21:37:06     active
BOOT  09.250.01.219                  4/4/2011     15:58:38     active



More information about the freebsd-stable mailing list