FreeBSD 8.2 and Lenovo X300 WWAN Modem

[Maciej Milewski]

Wednesday 18 of May 2011 12:22:37 crsnet.pl napisał(a):
>  On Wed, 18 May 2011 12:05:20 +0200, Maciej Milewski <milu at dat.pl>
> 
>  wrote:
> > Dnia środa, 18 maja 2011 o 11:40:36 crsnet.pl napisał(a):
> >>  Hello.
> >>  Have here anyone run this modem/GPS under FreeBSD 8.2 ? Modem is
> >>  recognized, but when i try to run ppp -ddial iplus i get this error
> >>  
> >>  
> >>  /var/log/messages
> >>  May 18 11:20:59 x60s ppp[1656]: tun0: Warning: Chat script failed
> >>  
> >>  /var/log/ppp
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Phase: deflink: opening ->
> >> 
> >> dial
> >> 
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Send: AT^M
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Expect(2): OK
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: AT^M^M
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: OK^M
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Send: AT+CFUN=1^M
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Expect(2): OK
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: AT+CFUN=1^M^M
> >>  May 18 11:20:53 x60s ppp[1656]: tun0: Chat: Received: ERROR^M
> >>  
> >>  
> >>  For GPS i try to use
> >>  gpsdrive-2.09_11    A GPS navigation system
> >>  viking-1.0.2        Program to manage GPS data (tracks, waypoints,
> >> 
> >> etc)
> >> 
> >>  But any of them can use X300 GPS;/
> >>  
> >>  #uname -a
> >>  FreeBSD x60s 8.2-RELEASE FreeBSD 8.2-RELEASE #0: Fri Feb 18
> >> 
> >> 02:24:46
> >> 
> >>  UTC 2011
> >> 
> >> root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> >> 
> >>  i386
> >>  
> >>  #dmesg
> >>  ugen6.3: <vendor 0x17ef> at usbus6
> >>  ugen4.2: <Sierra Wireless, Incorporated> at usbus4
> >>  u3g0: <Data Interface> on usbus4
> >>  u3g0: Found 3 ports.
> >>  
> >>  #sudo usbconfig
> >>  ugen4.2: <Sierra Wireless MC5725 Modem Sierra Wireless,
> >> 
> >> Incorporated>
> >> 
> >>  at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
> >>  ugen6.4: <Wimedia device ManfID> at usbus6, cfg=0 md=HOST spd=HIGH
> >>  (480Mbps) pwr=ON
> >>  
> >>  #ls -la /dev/cuaU*
> >>  crw-rw----  1 uucp  dialer    0, 123 18 maj 09:39 /dev/cuaU0.0
> >>  crw-rw----  1 uucp  dialer    0, 124 18 maj 09:39 /dev/cuaU0.0.init
> >>  crw-rw----  1 uucp  dialer    0, 125 18 maj 09:39 /dev/cuaU0.0.lock
> >>  crw-rw----  1 uucp  dialer    0, 129 18 maj 09:39 /dev/cuaU0.1
> >>  crw-rw----  1 uucp  dialer    0, 130 18 maj 09:39 /dev/cuaU0.1.init
> >>  crw-rw----  1 uucp  dialer    0, 131 18 maj 09:39 /dev/cuaU0.1.lock
> >>  crw-rw----  1 uucp  dialer    0, 135 18 maj 09:39 /dev/cuaU0.2
> >>  crw-rw----  1 uucp  dialer    0, 136 18 maj 09:39 /dev/cuaU0.2.init
> >>  crw-rw----  1 uucp  dialer    0, 137 18 maj 09:39 /dev/cuaU0.2.lock
> >>  
> >>  #cat /etc/ppp/ppp.conf
> >>  
> >>  iplus:
> >>   set log Phase Chat LCP IPCP CCP tun command
> >>   ident user-ppp VERSION (built COMPILATIONDATE)
> >>   
> >>   set device /dev/cuaU0.0
> >>   set speed 460800
> >>   #set speed 115200
> >>   set dial "ABORT BUSY TIMEOUT 2 \
> >>   
> >>          \"\" \
> >>          AT OK-AT-OK \
> >>          AT+CFUN=1 OK-AT-OK \
> >>          AT+CMEE=2 OK-AT-OK \
> >>          AT+CSQ OK \
> >>          AT+CGDCONT=1,\\\"IP\\\",\\\"internet\\\" OK \
> >>          AT+CGACT? OK-AT-OK \
> >>          AT+CGATT? OK \
> >>          AT+CGCLASS? OK \
> >>          AT+COPS? OK \
> >>          ATD*99***1# CONNECT"
> >>   
> >>   set timeout 180
> >>   enable dns
> >>   set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
> >>   add default HISADDR
> >>  
> >>  Regards, Adrian.
> > 
> > Do you have a pin defined on sim?
> 
>  No.
>  I check with minicom that AT+CFUN=1 (Turns modem on) give Error but
>  AT+PCSTATE=1 turns it on.
>  Unfortunately when i change it in ppp.conf from AT+CFUN=1 to
>  AT+PCSTATE=1 that give me
>  May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Send: AT+PCSTATE=1^M
>  May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Expect(2): OK
>  May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Received: AT+PCSTATE=1^M^M
>  May 18 12:13:48 x60s ppp[2697]: tun0: Chat: Received: ERROR^M
>  May 18 12:13:50 x60s ppp[2697]: tun0: Chat: Expect timeout

Oh and very important thing:
MC5725 is a CDMA EV-DO card. It will not work in GSM/UMTS network AFAIK.
https://www.sierrawireless.com/Newsroom/newsreleases/2006/09-18_sierra_wireless_reaches_two_ev-
do_revision_a_product_milestones.aspx

--
Maciej