setting usb disc to da1

[Daniel O'Connor]

On 15/05/2011, at 24:36, Thomas Krause wrote:
> I'm not sure with /boot/devices.hint. Could you give me a hint, how to
> set
> 
> # camcontrol devlist
> <AMCC 9500S-4LP  DISK 2.08>        at scbus0 target 0 lun 0 (da0,pass0)
> <Samsung G3 Station >              at scbus1 target 0 lun 0 (pass1,da1)
> 
> the Samsung G3 permanently to da1 (the AMCC must be da0).
> (This is a productive system and I don't want to do tests ...)

I think the following will work..

hint.scbus.0.at="twa0"
hint.da.0.at="scbus1"

hint.scbus.1.at="umass-sim0"
hint.da.1.at="scbus0"

Unfortunately I can't check the system I tested this on at the moment.

I would strongly suggest you use glabel & UFS IDs (or GPT IDs if you used GPT when installing) in fstab rather than wiring device nodes.

--
Daniel O'Connor software and network engineer
for Genesis Software - http://www.gsoft.com.au
"The nice thing about standards is that there
are so many of them to choose from."
  -- Andrew Tanenbaum
GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C