RELENG_8 pf stack issue (state count spiraling out of control)
Vlad Galu
dudu at dudu.ro
Tue May 3 06:10:02 UTC 2011
On Tue, May 3, 2011 at 8:01 AM, Jeremy Chadwick <freebsd at jdc.parodius.com>wrote:
> On Tue, May 03, 2011 at 07:22:10AM +0200, Vlad Galu wrote:
> > On Tue, May 3, 2011 at 3:58 AM, Jeremy Chadwick <
> freebsd at jdc.parodius.com>wrote:
> >
> > > (Please keep me CC'd as I'm not subscribed to freebsd-pf. And
> apologies
> > > for cross-posting, but the issue is severe enough that I wanted to make
> > > it known on -stable)
> > >
> > > The below issue I'm describing is from a machine running 8.2-PRERELEASE
> > > (RELENG_8) using src dated Tue Feb 15 05:46:02 PST 2011.
> > >
> > > Please read the story in full, as I have taken the time to describe
> > > everything I did, plus log output, as well as induce a panic via "call
> > > doadump" from ddb so I have a capture of the system at the time. I
> also
> > > have a theory as to what caused the problem, but how to trigger it is
> > > unknown; it may be a rare race condition.
> > >
> > >
> > > This morning I woke up to find a report from one of our users that he
> > > could not connect to a specific TCP port (not SSH) on one of our
> > > servers. I also found that I couldn't SSH into the same box. Serial
> > > console was working fine, and the serial console log showed no sign of
> > > any problems.
> > >
> > > I started to debug the issue of me not being able to SSH into the
> > > machine and within a few minutes became immediately concerned: pfctl
> > > indicated we had reached the maximum number permitted state table
> > > entries (10,000).
> > >
> > > ============================================================
> > > # pfctl -s info
> > > Status: Enabled for 76 days 06:49:10 Debug: Urgent
> > >
> > > Interface Stats for em0 IPv4 IPv6
> > > Bytes In 8969748840 0
> > > Bytes Out 8296135477 0
> > > Packets In
> > > Passed 128211763 0
> > > Blocked 621379 0
> > > Packets Out
> > > Passed 138483868 0
> > > Blocked 2579 0
> > >
> > > State Table Total Rate
> > > current entries 10000
> > > searches 267316807 40.6/s
> > > inserts 4440553 0.7/s
> > > removals 4430553 0.7/s
> > > Counters
> > > match 5067474 0.8/s
> > > bad-offset 0 0.0/s
> > > fragment 324 0.0/s
> > > short 0 0.0/s
> > > normalize 32 0.0/s
> > > memory 336946 0.1/s
> > > bad-timestamp 0 0.0/s
> > > congestion 0 0.0/s
> > > ip-option 0 0.0/s
> > > proto-cksum 1611 0.0/s
> > > state-mismatch 509 0.0/s
> > > state-insert 0 0.0/s
> > > state-limit 0 0.0/s
> > > src-limit 0 0.0/s
> > > synproxy 0 0.0/s
> > >
> > > # pfctl -s memory
> > > states hard limit 10000
> > > src-nodes hard limit 10000
> > > frags hard limit 5000
> > > tables hard limit 1000
> > > table-entries hard limit 100000
> > > ============================================================
> > >
> > > The above is mainly for em0 (our WAN interface); our LAN interface
> (em1)
> > > was not impacted because we use "set skip on em1". And it's a good
> > > thing too: we have lots of LAN-based services that this machine
> provides
> > > that would have been impacted. We also use "set skip on lo0".
> > >
> > > I immediately went to look at our monitoring graphs, which monitor pf
> > > state (specifically state table entries), polled via bsnmpd(8). This
> > > data is even more frightening:
> > >
> > > http://jdc.parodius.com/freebsd/pf-issue/pf_states-day.png
> > > http://jdc.parodius.com/freebsd/pf-issue/pf_states-week.png
> > >
> > > Literally something was spiraling out of control, starting at approx.
> > > 2011/05/01 (Sun) at 12:30 PDT. The situation became dire at approx.
> > > 19:45 PDT the same day, but I wasn't aware of it until said user
> brought
> > > an issue to my attention.
> > >
> > > You can see from the network I/O graphs (taken from SNMP polling our
> > > switch, NOT from the host/box itself) that there was no DoS attack or
> > > anything like that occurring -- this was something within FreeBSD
> > > itself. More evidence of that will become apparent.
> > >
> > > http://jdc.parodius.com/freebsd/pf-issue/port_03-day.png
> > > http://jdc.parodius.com/freebsd/pf-issue/port_03-week.png
> > >
> > > The first thing I did was "/etc/rc.d/pf reload". This command hung.
> > > Any attempt to send Ctrl-C/SIGINT did nothing. I was able to
> > > Ctrl-Z/SIGSTOP it, then use kill %1, but the actual reload process did
> > > not truly die (despite csh stating "Terminated"). The only way to kill
> > > it was to kill -9.
> > >
> > > Attempts to shut down any daemons which utilised the network --
> > > including things that only used em1 -- would not shut down. This
> > > included things like postfix, mysqld, and some inet-based services. I
> > > was forced to kill -9 them. Things like bsnmpd, however, did shut
> down.
> > >
> > > Equally as uncomfortable, "shutdown -r now" did not reboot the system.
> > > That is to say, wall(1)'s announcement was shown, but the actual
> > > stopping of services did not begin.
> > >
> > > The next thing I tried was "/etc/rc.d/pf stop", which worked. Then I
> > > did "/etc/rc.d/pf start", which also worked. However, what I saw next
> > > surely indicated a bug in the pf layer somewhere -- "pfctl -s states"
> > > and "pfctl -s info" disagreed on the state count:
> > >
> > > ============================================================
> > > # pfctl -s info
> > > Status: Enabled for 0 days 00:00:16 Debug: Urgent
> > >
> > > Interface Stats for em0 IPv4 IPv6
> > > Bytes In 3459 0
> > > Bytes Out 0 0
> > > Packets In
> > > Passed 0 0
> > > Blocked 29 0
> > > Packets Out
> > > Passed 0 0
> > > Blocked 0 0
> > >
> > > State Table Total Rate
> > > current entries 10000
> > > searches 29 1.8/s
> > > inserts 0 0.0/s
> > > removals 0 0.0/s
> > > Counters
> > > match 29 1.8/s
> > > bad-offset 0 0.0/s
> > > fragment 0 0.0/s
> > > short 0 0.0/s
> > > normalize 0 0.0/s
> > > memory 18 1.1/s
> > > bad-timestamp 0 0.0/s
> > > congestion 0 0.0/s
> > > ip-option 0 0.0/s
> > > proto-cksum 0 0.0/s
> > > state-mismatch 0 0.0/s
> > > state-insert 0 0.0/s
> > > state-limit 0 0.0/s
> > > src-limit 0 0.0/s
> > > synproxy 0 0.0/s
> > >
> > > # pfctl -s state | wc -l
> > > 0
> > > ============================================================
> > >
> > > The "pf uptime" shown above, by the way, matches system uptime.
> > >
> > > I then attempted "pfctl -F state", but nothing changed (looked the same
> > > as above).
> > >
> > > Since I could not reboot the box, I was forced to drop to ddb via
> serial
> > > console. I did some commands like "ps" and the like, and then "call
> > > doadump" to induce a kernel panic, and then "reboot" (which worked).
> > >
> > > Once the machine came back up, savecore(8) ran, wrote the data out, and
> > > everything has been fine since. /var/crash/core.txt.0 is ~68KBytes and
> > > I do not feel comfortable sharing its content publicly, but will be
> > > happy to hand it to developer(s) who are interested. Relevant tidbits
> I
> > > can discern:
> > >
> > >
> ------------------------------------------------------------------------
> > > ps -axl
> > >
> > > UID PID PPID CPU PRI NI VSZ RSS MWCHAN STAT TT TIME
> COMMAND
> > > 0 422 0 0 -16 0 0 0 pftm DL ??
> 1362773081:04.00
> > > [pfpurge]
> > >
> ------------------------------------------------------------------------
> > >
> > >
> ------------------------------------------------------------------------
> > > vmstat -z
> > >
> > > ITEM SIZE LIMIT USED FREE REQUESTS
> > > FAILURES
> > > pfsrctrpl: 152, 10000, 0, 0, 0,
> > > 0
> > > pfrulepl: 912, 0, 40, 88, 806,
> > > 0
> > > pfstatepl: 392, 10000, 10000, 0, 4440553,
> > > 341638
> > > pfaltqpl: 240, 0, 0, 0, 0,
> > > 0
> > > pfpooladdrpl: 88, 0, 0, 0, 0,
> > > 0
> > > pfrktable: 1296, 1002, 4, 20, 112,
> > > 0
> > > pfrkentry: 216, 100008, 603, 891, 15384,
> > > 0
> > > pfrkentry2: 216, 0, 0, 0, 0,
> > > 0
> > > pffrent: 32, 5050, 0, 303, 1620,
> > > 0
> > > pffrag: 80, 0, 0, 135, 807,
> > > 0
> > > pffrcache: 80, 10035, 0, 0, 0,
> > > 0
> > > pffrcent: 24, 50022, 0, 0, 0,
> > > 0
> > > pfstatescrub: 40, 0, 0, 0, 0,
> > > 0
> > > pfiaddrpl: 120, 0, 0, 0, 0,
> > > 0
> > > pfospfen: 112, 0, 696, 30, 18096,
> > > 0
> > > pfosfp: 40, 0, 407, 97, 10582,
> > > 0
> > >
> ------------------------------------------------------------------------
> > >
> > > You can see evidence of processes not exiting/doing what they should do
> > > here:
> > >
> > >
> ------------------------------------------------------------------------
> > > fstat
> > >
> > > USER CMD PID FD MOUNT INUM MODE SZ|DV R/W
> > > root shutdown 91155 root / 2 drwxr-xr-x 512 r
> > > root shutdown 91155 wd / 2 drwxr-xr-x 512 r
> > > root shutdown 91155 text / 47195 -r-sr-x--- 15912 r
> > > root shutdown 91155 0 /dev 38 crw------- ttyu0 rw
> > > root shutdown 91155 1 /dev 38 crw------- ttyu0 rw
> > > root shutdown 91155 2 /dev 38 crw------- ttyu0 rw
> > > root sh 91129 root / 2 drwxr-xr-x 512 r
> > > root sh 91129 wd / 2 drwxr-xr-x 512 r
> > > root sh 91129 text / 44 -r-xr-xr-x 134848 r
> > > root sh 91129 0 /dev 38 crw------- ttyu0 rw
> > > root sh 91129 1* pipe ffffff01e78fc9e0 <->
> ffffff01e78fc888
> > > 0 rw
> > > root sh 91129 2 /dev 20 crw-rw-rw- null w
> > > root shutdown 91115 root / 2 drwxr-xr-x 512 r
> > > root shutdown 91115 wd /storage 5 drwx------ 37 r
> > > root shutdown 91115 text / 47195 -r-sr-x--- 15912 r
> > > root shutdown 91115 0 /dev 38 crw------- ttyu0 rw
> > > root shutdown 91115 1 /dev 38 crw------- ttyu0 rw
> > > root shutdown 91115 2 /dev 38 crw------- ttyu0 rw
> > > root shutdown 91115 3* local dgram ffffff008ff92960
> > > root sh 90818 root / 2 drwxr-xr-x 512 r
> > > root sh 90818 wd / 70659 drwxr-xr-x 512 r
> > > root sh 90818 text / 44 -r-xr-xr-x 134848 r
> > > root sh 90818 0 /dev 38 crw------- ttyu0 rw
> > > root sh 90818 1* pipe ffffff0043f1ecb8 <->
> ffffff0043f1eb60
> > > 0 rw
> > > root sh 90818 2 /dev 20 crw-rw-rw- null w
> > > root csh 90802 root / 2 drwxr-xr-x 512 r
> > > root csh 90802 wd / 2 drwxr-xr-x 512 r
> > > root csh 90802 text / 51 -r-xr-xr-x 358752 r
> > > root csh 90802 15 /dev 38 crw------- ttyu0 rw
> > > root csh 90802 16 /dev 38 crw------- ttyu0 rw
> > > root csh 90802 17 /dev 38 crw------- ttyu0 rw
> > > root csh 90802 18 /dev 38 crw------- ttyu0 rw
> > > root csh 90802 19 /dev 38 crw------- ttyu0 rw
> > >
> ------------------------------------------------------------------------
> > >
> > > No indication of mbuf exhaustion, putting further focus on the pf
> stack:
> > >
> > >
> ------------------------------------------------------------------------
> > > netstat -m
> > >
> > > 2054/1786/3840 mbufs in use (current/cache/total)
> > > 2048/1414/3462/25600 mbuf clusters in use (current/cache/total/max)
> > > 2048/896 mbuf+clusters out of packet secondary zone in use
> (current/cache)
> > > 0/320/320/12800 4k (page size) jumbo clusters in use
> > > (current/cache/total/max)
> > > 0/0/0/19200 9k jumbo clusters in use (current/cache/total/max)
> > > 0/0/0/12800 16k jumbo clusters in use (current/cache/total/max)
> > > 4609K/4554K/9164K bytes allocated to network (current/cache/total)
> > > 0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
> > > 0/0/0 requests for jumbo clusters denied (4k/9k/16k)
> > > 0 requests for sfbufs denied
> > > 0 requests for sfbufs delayed
> > > 0 requests for I/O initiated by sendfile
> > > 0 calls to protocol drain routines
> > >
> ------------------------------------------------------------------------
> > >
> > > Here's one piece of core.0.txt which makes no sense to me -- the "rate"
> > > column. I have a very hard time believing that was the interrupt rate
> > > of all the relevant devices at the time (way too high). Maybe this
> data
> > > becomes wrong only during a coredump? The total column I could
> believe.
> > >
> > >
> ------------------------------------------------------------------------
> > > vmstat -i
> > >
> > > interrupt total rate
> > > irq4: uart0 54768 912
> > > irq6: fdc0 1 0
> > > irq17: uhci1+ 172 2
> > > irq23: uhci3 ehci1+ 2367 39
> > > cpu0: timer 13183882632 219731377
> > > irq256: em0 260491055 4341517
> > > irq257: em1 127555036 2125917
> > > irq258: ahci0 225923164 3765386
> > > cpu2: timer 13183881837 219731363
> > > cpu1: timer 13002196469 216703274
> > > cpu3: timer 13183881783 219731363
> > > Total 53167869284 886131154
> > >
> ------------------------------------------------------------------------
> > >
> > > Here's what a normal "vmstat -i" shows from the command-line:
> > >
> > > # vmstat -i
> > > interrupt total rate
> > > irq4: uart0 518 0
> > > irq6: fdc0 1 0
> > > irq23: uhci3 ehci1+ 145 0
> > > cpu0: timer 19041199 1999
> > > irq256: em0 614280 64
> > > irq257: em1 168529 17
> > > irq258: ahci0 355536 37
> > > cpu2: timer 19040462 1999
> > > cpu1: timer 19040458 1999
> > > cpu3: timer 19040454 1999
> > > Total 77301582 8119
> > >
> > > We graph many aspects of this box, including CPU load, memory/swap
> > > usage, etc. and none show any sign that the interrupt rate on all of
> > > those devices was even remotely out of control. (I would expect to see
> > > CPU through the roof given the above data)
> > >
> > > I have since rebuilt/reinstalled world/kernel on the machine with the
> > > latest RELENG_8 code (box is now 8.2-STABLE #0: Mon May 2 14:44:18 PDT
> > > 2011), hoping whatever this was may have been fixed.
> > >
> > > As for what I think may have triggered it, but I have no hard evidence
> > > of such: on April 29th, I changed our pf.conf and did "/etc/rc.d/pf
> > > reload". The pf.conf change was a single line:
> > >
> > > Old: scrub on em0 all
> > > New: scrub in on em0 all
> > >
> > > Why it took the problem approximately 3 days to start is unknown. It's
> > > the only change we've made to the system (truly/honestly), and it was a
> > > change to pf.conf.
> > >
> > > If anyone has advice (or has seen the above problem), or is interested
> > > in debugging it -- as I said, I have a vmcore -- I'm happy to assist in
> > > any way I can. I would hate for someone else to get bit by this, and
> > > really am hoping its something that has been fixed between February and
> > > now.
> > >
> > >
> > I'm seeing this as well. You could change your scrub rules so that you
> > specifically avoid TCP reassembly (that creates states).
>
> Thank you very much. This helps -- and I'm also glad someone else has
> seen this behaviour. That confirms it's not specific to my equipment,
> which is good.
>
> Regarding scrubbing and TCP reassembly (option "reassemble tcp"
> according to pf.conf): I wasn't under the impression this option was
> enabled by default. This got me wondering what the defaults actually
> are (pf.conf(5) is somewhat vague in this regard, but it does state
> that "fragment reassemble" is enabled by default). The rule I use:
>
> scrub in on em0 all
>
> Appears to get evaluated into this (per "pfctl -s rules -v"):
>
> scrub in on em0 all fragment reassemble
>
Ah, ok, my bad then. I used to have "reassemble tcp" enabled and disabled it
this morning. However, if your symptoms are there without it, that's bad
news.
I disabled tcp reassembly to make sure there are no other states than the
ones I allow via explicit keep/modulate/synproxy state rules. Disabling
scrubbing altogether seems like a good next step.
> Did you mean to tell me to disable the "fragment reassemble" option
> (which is different from "reassemble tcp")? If so, how do I do that?
> It looks like I could use a "no scrub" rule, except I can't find any
> examples of this on the web or in the docs. Or is it just better to
> remove use of scrub entirely until whatever this is gets fixed?
>
> --
> | Jeremy Chadwick jdc at parodius.com |
> | Parodius Networking http://www.parodius.com/ |
> | UNIX Systems Administrator Mountain View, CA, USA |
> | Making life hard for others since 1977. PGP 4BD6C0CB |
>
>
--
Good, fast & cheap. Pick any two.
More information about the freebsd-stable
mailing list