8.2-BETA1 / 8.2-RC1 ACPI and other errors in dmesg after upgrade from 7.2

[Miroslav Lachman]

Hi,

I have a few machines Sun Fire X2100 M2. I upgraded from FreeBSD 7.2 to 
8.2-BETA1 and 8.2-RC1 and now I see following errors in dmesg:


acpi0: <A M I OEMXSDT> on motherboard
ACPI Error: Invalid type (Alias) for target of Scope operator [CPU1] 
(Cannot override) (20101013/dswload-324)
ACPI Exception: AE_AML_OPERAND_TYPE, During name lookup/catalog 
(20101013/psloop-326)
.
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
.
.
uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT
uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1


And then in /var/log/messages
pid 3802 (sshd) is using legacy pty devices - not logging anymore
pid 38796 (try), uid 0: exited on signal 10 (core dumped)


Except these messages, system and services are running fine. So this is 
just a report of something suspected.


Full dmesg:

Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RC1 #0: Wed Dec 22 17:34:20 UTC 2010
     root at mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 1210 (1811.10-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0x40f33  Family = f  Model = 43 
Stepping = 3
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x2001<SSE3,CX16>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
   AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
real memory  = 4294967296 (4096 MB)
avail memory = 4114534400 (3923 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
ACPI Error: Invalid type (Alias) for target of Scope operator [CPU1] 
(Cannot override) (20101013/dswload-324)
ACPI Exception: AE_AML_OPERAND_TYPE, During name lookup/catalog 
(20101013/psloop-326)
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <nVidia nForce MCP55 USB Controller> mem 0xfcffb000-0xfcffbfff 
irq 21 at device 2.0 on pci0
ohci0: [ITHREAD]
usbus0: <nVidia nForce MCP55 USB Controller> on ohci0
ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 
0xfcffac00-0xfcffacff irq 22 at device 2.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <NVIDIA nForce MCP55 USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port 
0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f 
mem 0xfcff9000-0xfcff9fff irq 23 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 
0xfd000000-0xfd7fffff,0xfdee0000-0xfdefffff irq 16 at device 5.0 on pci1
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xc880-0xc887 mem 
0xfcff8000-0xfcff8fff,0xfcffa800-0xfcffa8ff,0xfcffa400-0xfcffa40f irq 20 
at device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 2 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe0: Ethernet address: 00:1b:24:bd:e2:0f
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xc800-0xc807 mem 
0xfcff7000-0xfcff7fff,0xfcffa000-0xfcffa0ff,0xfcff6c00-0xfcff6c0f irq 21 
at device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 3 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe1: Ethernet address: 00:1b:24:bd:e2:10
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 
0x009003> mem 0xfdff0000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at 
device 4.0 on pci6
bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X
miibus2: <MII bus> on bge0
brgphy0: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus2
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:1b:24:bd:e2:0d
bge0: [ITHREAD]
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 
0x009003> mem 0xfdfc0000-0xfdfcffff,0xfdfb0000-0xfdfbffff irq 18 at 
device 4.1 on pci6
bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X
miibus3: <MII bus> on bge1
brgphy1: <BCM5714 10/100/1000baseTX PHY> PHY 1 on miibus3
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:1b:24:bd:e2:0e
bge1: [ITHREAD]
pcib7: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci8: <ACPI PCI bus> on pcib8
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xc7fff,0xcb000-0xcc7ff,0xcc800-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
powernow1: <PowerNow! K8> on cpu1
device_attach: powernow1 attach returned 6
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata2-master UDMA100 
SATA 3Gb/s
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ad6: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata3-master UDMA100 
SATA 3Gb/s
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device mirror/gms1 launched (2/2).
Root mount waiting for: usbus1 usbus0
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 8 ports with 8 removable, self powered
Root mount waiting for: usbus1
ugen0.2: <Virtual> at usbus0
ukbd0: <Virtual USB MULTIMEDIA KEYBOARD, class 0/0, rev 1.10/0.01, addr 
2> on usbus0
kbd2 at ukbd0
ums0: <Virtual USB MULTIMEDIA KEYBOARD, class 0/0, rev 1.10/0.01, addr 
2> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT
uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1
Trying to mount root from ufs:/dev/mirror/gms1a
ZFS filesystem version 4
ZFS storage pool version 15


Miroslav Lachman