ahci.ko and IXP700/800 -> no disk found

[Harald Schmalzbauer]

schrieb Harald Schmalzbauer am 02.02.2011 21:05 (localtime):
> Hello,
> 
> there was some discussion one year ago:
> http://lists.freebsd.org/pipermail/freebsd-current/2010-January/015180.html
> 
> I'm not seeing exactly the same problem, no "timeout" message, but with
> ahci.ko loaded, no disk gets recognized.
> 
> Staying with ataahci it works fine.
> 
> System is 8.2-RC3-amd64.
> 
> Here's some info about the SATA chip:
> atapci0 at pci0:0:17:0:	class=0x010601 card=0x1609103c chip=0x43911002
> rev=0x40 hdr=0x00
>     vendor	= 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>     device	= 'SB700 SATA Controller [AHCI mode]'
>     class	= mass storage
>     subclass	= SATA
>     bar    [10] = type I/O Port, range 32, base 0xd000, size  8, enabled
>     bar    [14] = type I/O Port, range 32, base 0xc000, size  4, enabled
>     bar    [18] = type I/O Port, range 32, base 0xb000, size  8, enabled
>     bar    [1c] = type I/O Port, range 32, base 0xa000, size  4, enabled
>     bar    [20] = type I/O Port, range 32, base 0x9000, size 16, enabled
>     bar    [24] = type Memory, range 32, base 0xfdfffc00, size 1024, enabled
>     cap  05[50]	= MSI supports 4 messages, 64 bit
>     cap  12[70]	= SATA Index-Data Pair
>     cap  13[a4]	= PCI Advanced Features: FLR TP
> 
> Disabling MSI doesn't change anything.

I Installed 8.2-RC on a esata disk, which is not ahci capable anyways,
so I could watch the machine booting with ahci.ko loaded.
One thing of interest could be the answer I get when I 'camcontrol
rescan all':
ahcich0: Poll error on slot 0, TFD: 04d1

Any chance to get ahci.ko working with that SB700 controller?

Thanks,

-Harry

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 196 bytes
Desc: OpenPGP digital signature
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20110204/e26ee732/signature.pgp