Failure to burn with ahci mode.

[David DEMELIER]

2010/9/26 Andriy Gapon <avg at icyb.net.ua>:
> on 26/09/2010 20:37 David DEMELIER said the following:
>> markand at Melon ~ $ sudo camcontrol devlist
>> <WDC WD3200BEKT-60F3T1 12.01A12>   at scbus0 target 0 lun 0 (ada0)
>> <hp DVDRAM GT20L DC05>             at scbus1 target 0 lun 0 (cd0)
>>
>> markand at Melon ~ $ sudo cdrecord downloads/FreeBSD-8.1-RELEASE-amd64-livefs.iso
>> cdrecord: No write mode specified.
>> cdrecord: Assuming -sao mode.
>> cdrecord: If your drive does not accept -sao, try -tao.
>> cdrecord: Future versions of cdrecord may have different drive
>> dependent defaults.
>> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright
>> (C) 1995-2010 Jörg Schilling
>> cdrecord: Error 0. Cannot open or use SCSI driver.
>> cdrecord: For possible targets try 'cdrecord -scanbus'.
>> cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
>>
>> markand at Melon ~ $ sudo cdrecord -scanbus
>> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright
>> (C) 1995-2010 Jörg Schilling
>> cdrecord: Error 0. Cannot open or use SCSI driver.
>> cdrecord: For possible targets try 'cdrecord -scanbus'.
>> cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
>
> Doesn't look like you have xpt and pass devices in your kernel, which are
> (almost) mandatory when use CAM-based drivers.
> Not sure if ahci(4) mentions this.
>
> --
> Andriy Gapon
>

Everything works now… Sorry for the noise !

We can close the PR too.

-- 
Demelier David