MSIX failure

[Jeremy Chadwick]

On Thu, Sep 09, 2010 at 02:54:01PM +0200, Gareth de Vaux wrote:
> On Wed 2010-09-08 (09:41), Jack Vogel wrote:
> > This is what'd I'd expect, the onboard is PCH chipset, support was not in
> > 8.0, but as I said, in 8.1 (and hence stable/8) it is supported, and it should
> > work.
> 
> I've just paid the machine a visit and yes, MSIX fails on the onboard but
> the device still works.
> 
> The PCI card however doesn't work, whereas it did when using 8.0-RELEASE.
> (There is occasional activity from tcpdump). I'm able to use the onboard
> so I can survive, but FYI, the PCI card output:
> 
> kernel: em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port 0x1000-0x103f mem 0xe3120000-0xe313ffff,0xe3100000-0xe311ffff irq 9 at device 1.0 on pci5
> kernel: em1: [FILTER]
> kernel: em1: Ethernet address: 00:1b:21:5b:f2:18
> 
> (no MSIX failure here, or in 8.0-RELEASE)
> 
> $ ifconfig em1
> em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>         options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
>         ether 00:1b:21:5b:f2:18
>         media: Ethernet autoselect
>         status: no carrier
> 
> pciconf -lv:
> 
> em1 at pci0:5:1:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)'
>     class      = network
>     subclass   = ethernet

Can you add the "-c" flag to your pciconf command?  Thanks.

-- 
| Jeremy Chadwick                                   jdc at parodius.com |
| Parodius Networking                       http://www.parodius.com/ |
| UNIX Systems Administrator                  Mountain View, CA, USA |
| Making life hard for others since 1977.              PGP: 4BD6C0CB |