atapicam issue

[Alexander Motin]

hans.dampf at eml.cc wrote:
> Here's the full and uncensored log: http://pastebin.org/308021
> 
> On Fri, 04 Jun 2010 19:28:10 +0300, "Alexander Motin" <mav at FreeBSD.org>
> said:
>> hans.dampf at eml.cc wrote:
>>> FreeBSD-stable clandestinely dropped support for my p-ata DVD drive some
>>> two or three weeks ago. The relevant "devcontrol list"-entry is still in
>>> its place, yet atapicam fails to create "/dev/cd0". 
>>>
>>> # camcontrol devlist
>>> <HL-DT-ST DVD-RAM GH22NP20 1.02>   at scbus0 target 0 lun 0 (pass0)
>>>
>>> dmesg reports:
>>> ------------------------
>>> (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
>>> (probe0:ata0:0:0:0): CAM status: SCSI Status Error
>>> (probe0:ata0:0:0:0): SCSI status: Check Condition
>>> (probe0:ata0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on,
>>> reset, or bus device reset occurred)
>>> (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
>>> (probe0:ata0:0:0:0): CAM status: SCSI Status Error
>>> (probe0:ata0:0:0:0): SCSI status: Check Condition
>>> (probe0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present
>>> - tray closed)

I don't see there not only cdX, but also acdX device. So either it is
not atapicam problem, or you have custom kernel without both acd and cd
drivers.

-- 
Alexander Motin