failed to set mtrr: invalid argument
Robert Noland
rnoland at FreeBSD.org
Tue May 19 23:05:44 UTC 2009
On Tue, 2009-05-19 at 13:52 -0700, Chris H wrote:
> Quoting Robert Noland <rnoland at freebsd.org>:
>
> > On Tue, 2009-05-19 at 11:47 -0700, Chris H wrote:
> >> Quoting Chris H <chris#@1command.com>:
> >>
> >> > Quoting Laurent Grangeau <thorzero at gmail.com>:
> >> >
> >> >> I think I can handle this answer.
> >> >>
> >> >> This is the default behavior of Xorg 7.4. If you want to see the old
> >> >> screen, launch Xorg with the -retro option.
> >> >> The command should be like this :
> >> >> X -config xorg.conf.new -retro
> >> >>
> >> >> If your mouse or your keyboard doesn't seem to work, look if you
> >> >> have enable dbus and hald. In your /etc/rc.conf, you should have
> >> >> dbus_enable="YES" and hald_enable="YES" (I'm not sure about this).
> >> >>
> >> >> All this is explain in the handbook : Configuring X11.
> >> >
> >> > Hello Laurent, and thank you for your reply.
> >> >
> >> > For the record, this is the way I /first/ attempted to do it -
> >> >
> >> > echo 'enable_hald="YES"' >> /etc/rc.conf
> >> > echo 'enable_dbus="YES"' >> /etc/rc.conf
> >> >
> >> > Bounce the box
> >> > attempt to test Xorg:
> >> >
> >> > Xorg -config /root/xorg.conf.new
> >> >
> >> > no joy.
> >> >
> >> > So I tweaked the file (removing the card I wasn't going to use).
> >> > Save the remaining as /etc/X11/xorg.conf.nvidia &&
> >> >
> >> > Xorg -config /etc/X11/xorg.conf.nvidia
> >> >
> >> > But again, "no joy".
> >> >
> >> > I'll try it again, and report back with my findings.
> >> >
> >> > Thanks again for your response.
> >> >
> >> > --Chris H
> >>
> >> OK here's the results:
> >>
> >> echo 'hald_enable="YES"' >> /etc/rc.conf
> >> echo 'enable_dbus="YES"' >> /etc/rc.conf
> >>
> >> bounce the box
> >>
> >> Xorg -config /etc/X11/xorg.conf.nvidia
> >>
> >> returns the following:
> >>
> >> X.Org X Server 1.6.0
> >> Release Date: 2009-2-25
> >> X Protocol Version 11, Revision 0
> >> Build Operating System: FreeBSD 7.1-RELEASE i386 Current Operating
>
> ---8<--[BIG SNIP]--8<---
>
> >> (**) Option "DataBits" "8"
> >> (**) Option "Parity" "None"
> >> (**) Option "Vmin" "1"
> >> (**) Option "Vtime" "0"
> >> (**) Option "FlowControl" "None"
> >>
> >> An attempt to bail out of X on tty8 (ctl-alt-backspace)
> >> returns:
> >> Failed to switch consoles (Invalid argument)
> >> on tty0
> >>
> >> Attempting again returns:
> >> Failed to switch consoles (Invalid argument)
> >> on tty0
> >>
> >> move to tty0 (ctl-alt-f1) && ctl-C
> >>
> >> OK let's try the -retro switch on the Xorg created conf...
> >>
> >> ---
> >>
> >> Xorg -config xorg.conf.new -retro
> >> provides:
> >>
> >> X.Org X Server 1.6.0
> >> Release Date: 2009-2-25
> >> X Protocol Version 11, Revision 0
> >> Build Operating System: FreeBSD 7.1-RELEASE i386 Current Operating
> >> System: FreeBSD udns.ultimatedns.NET 7.1-RELEASE FreeBSD 7.1-RELEASE
> >> #0: Thu Jan 1 14:37:25 UTC 2009
> >> root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
> >> Build Date: 16 May 2009 07:15:01AM
> >>
> >> Before reporting problems, check http://wiki.x.org
> >> to make sure that you have the latest version.
> >> Markers: (--) probed, (**) from config file, (==) default setting,
> >> (++) from command line, (!!) notice, (II) informational,
> >> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> >> (==) Log file: "/var/log/Xorg.0.log", Time: Tue May 19 11:33:40 2009
> >> (++) Using config file: "/etc/X11/xorg.conf.new"
> >> (==) ServerLayout "X.org Configured"
> >> (**) |-->Screen "Screen0" (0)
> >> (**) | |-->Monitor "Monitor0"
> >> (**) | |-->Device "Card0"
> >> (**) |-->Screen "Screen1" (1)
> >> (**) | |-->Monitor "Monitor1"
> >> (**) | |-->Device "Card1"
> >> (**) |-->Input Device "Mouse0"
> >> (**) |-->Input Device "Keyboard0"
> >> (==) Automatically adding devices
>
> ---8<--[BIG SNIP]--8<---
>
> >> (II) Module int10: vendor="X.Org Foundation"
> >> compiled for 1.6.0, module version = 1.0.0
> >> ABI class: X.Org Video Driver, version 5.0
> >> (==) MACH64(0): Write-combining range (0xa0000,0x20000) was already clear
> >> (==) MACH64(0): Write-combining range (0xc0000,0x40000) was already clear
> >>
> >>
> >> Which only leaves me with a blinking block cursor in the upper
> >> LEFT-hand corner while hooked up to the NV card. There is no
> >> output to the MACH64.
> >>
> >> I don't think this is the answer.
> >
> > Hrm, ok... It might still be getting confused by the ati card... The
> > issue comes down to which card (hopefully not both) is handling legacy
> > vga calls to 0xc0000. I did just notice someone else post an issue with
> > the openchrome driver and int10 though, so you might try disabling
> > int10.
> >
> > robert.
>
> Hello Robert, and thank you for your reply.
>
> I apologize, but am not exactly sure how to do this. The following:
>
> SubSection "int10"
> Option "omit int10" # don't initialise openchrome extension
> EndSubSection
>
> didn't do it. :(
man xorg.conf
Option "NoInt10" "boolean"
Disables the Int10 module, a module that uses the int10
call to
the BIOS of the graphics card to initialize it. Default:
false.
robert.
> --Chris H.
>
> >
> >> --Chris H
> >>
> >> >
> >> >>
> >> >> Le 19 mai 09 à 19:15, Chris H <chris#@1command.com> a écrit :
> >> >>
> >> >>> Quoting Robert Noland <rnoland at FreeBSD.org>:
> >> >>>
> >> >>>> On Mon, 2009-05-18 at 23:40 -0700, Chris H wrote:
> >> >>>>> Quoting "Paul B. Mahol" <onemda at gmail.com>:
> >> >>>>>
> >> >>>>> > On 5/19/09, Chris H <chris#@1command.com> wrote:
> >> >>>>> >> Quoting Chris H <chris#@1command.com>:
> >> >>>>> >>
> >> >>>>> >>> Quoting Chris H <chris#@1command.com>:
> >> >>>>> >>>
> >> >>>>> >>>> Greetings,
> >> >>>>> >>>> I'm unable to get xorg-7.4 to accomodate my Gforce4 MX 440.
> >> >>>>> >>>> On 7.1-7.2 releases. I'm currently working (struggling) with
> >> >>>>> >>>> it on a 7.1 install/GENERIC with cvsup over the weekend
> >> (Sunday),
> >> >>>>> >>>> I've seen only a few discussions regarding this, but no joy.
> >> >>>>> >>>>
> >> >>>>> >>>> I'm not sure what to post for additional information. So I'll
> >> >>>>> >>>> provide the output of dmesg(8), and Xorg.0.log via links.
> >> >>>>> >>>>
> >> >>>>> >>>> Thank you for all your time and consideration in this matter.
> >> >>>>> >>>>
> >> >>>>> >>>> Sincerely,
> >> >>>>> >>>> Chris H
> >> >>>>> >>>>
> >> >>>>> >>>> Xorg log:
> >> >>>>> >>>> http://codewarehouse.NET/output/Xorg.0.log
> >> >>>>> >>>>
> >> >>>>> >>>> relevent dmesg(8) output:
> >> >>>>> >>>> http://codewarehouse.NET/output/dmesg.output
> >> >>>>> >>>
> >> >>>>> >>> OOPS! I guess the xorg config might be useful:
> >> >>>>> >>> http://codewarehouse.NET/output/xorg.conf.nvidia
> >> >>>>> >>>
> >> >>>>> >>>>
> >> >>>>> >> SIGH... Seems that the registrar isn't paying attention.
> >> >>>>> >> They happily accepted my money, but forgot to renew the domain.
> >> >>>>> >>
> >> >>>>> >> So here's trying to attach the files...
> >> >>>>> >
> >> >>>>> > That message appears for me only when I use xf86-video-vesa driver.
> >> >>>>>
> >> >>>>> I see. Well I'm specifically using the nv driver. Here's another
> >> >>>>> attempt to provide the relevant info:
> >> >>>>
> >> >>>> You have more than one card in the machine, which might be confusing
> >> >>>> things. The mtrr failure is caused by how your bios sets up memory
> >> >>>> regions. It should only impact performance.
> >> >>>>
> >> >>>> Exactly what issue are you seeing?
> >> >>>
> >> >>> I'm seeing a black screen on ctl-alt-f9 (tty8)
> >> >>> I'm seeing the message listed as this thread topic on tty0
> >> (ctl-alt- f1).
> >> >>> The proceedure theat led me here is:
> >> >>> Xorc -configure
> >> >>> edit /root/xorg.config.new (move all the ati related stuff to
> >> >>> xorg.conf.ati).
> >> >>> Tweak whats left, and save it as /etc/X11/xorg.conf.nvidia.
> >> >>> exec Xorg -config /etc/X11/xorg.conf.nvidia
> >> >>>
> >> >>> The ctl-alt-backspace won't break me out of Xorg/tty8. I am forced
> >> >>> to ctl-alt-f1 (where I read the error message) then use ctl-C -
> >> >>> which kills Xorg, and returns me to a working console.
> >> >>>
> >> >>> Thank you Robert, for taking the time to respond.
> >> >>>
> >> >>> --Chris H
> >> >>>
> >> >>>>
> >> >>>> robert.
> >> >>>>
> >> >>>>> Xorg log:
> >> >>>>> X.Org X Server 1.6.0
> >> >>>>> Release Date: 2009-2-25
> >> >>>>> X Protocol Version 11, Revision 0
> >> >>>>> Build Operating System: FreeBSD 7.1-RELEASE i386 Current Operating
> >> >>>>> System: FreeBSD udns 7.1-RELEASE FreeBSD 7.1-RELEASE #0: Thu Jan 1
> >> >>>>> 14:37:25 UTC 2009
> >> >>>>> root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
> >> >>>>> Build Date: 16 May 2009 07:15:01AM
> >> >>>>>
> >> >>>>> Before reporting problems, check http://wiki.x.org
> >> >>>>> to make sure that you have the latest version.
> >> >>>>> Markers: (--) probed, (**) from config file, (==) default setting,
> >> >>>>> (++) from command line, (!!) notice, (II) informational,
> >> >>>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> >> >>>>> (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 18 20:34:43 2009
> >> >>>>> (++) Using config file: "/etc/X11/xorg.conf.nvidia"
> >> >>>>> (==) ServerLayout "X.org Configured"
> >> >>>>> (**) |-->Screen "Screen0" (0)
> >> >>>>> (**) | |-->Monitor "Monitor1"
> >> >>>>> (**) | |-->Device "Card1"
> >> >>>>> (**) |-->Input Device "Mouse0"
> >> >>>>> (**) |-->Input Device "Keyboard0"
> >> >>>>> (**) Option "AllowEmptyInput" "false"
> >> >>>>> (==) Automatically adding devices
> >> >>>>> (==) Automatically enabling devices
> >> >>>>> (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does not exist.
> >> >>>>> Entry deleted from font path.
> >> >>>>> (WW) `fonts.dir' not found (or not valid) in
> >> >>>>> "/usr/local/lib/X11/fonts/100dpi/".
> >> >>>>> Entry deleted from font path.
> >> >>>>> (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/100dpi/").
> >> >>>>> (WW) `fonts.dir' not found (or not valid) in
> >> >>>>> "/usr/local/lib/X11/fonts/75dpi/".
> >> >>>>> Entry deleted from font path.
> >> >>>>> (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/75dpi/").
> >> >>>>> (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does not exist.
> >> >>>>> Entry deleted from font path.
> >> >>>>> (WW) `fonts.dir' not found (or not valid) in
> >> >>>>> "/usr/local/lib/X11/fonts/100dpi/".
> >> >>>>> Entry deleted from font path.
> >> >>>>> (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/100dpi/").
> >> >>>>> (WW) `fonts.dir' not found (or not valid) in
> >> >>>>> "/usr/local/lib/X11/fonts/75dpi/".
> >> >>>>> Entry deleted from font path.
> >> >>>>> (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/75dpi/").
> >> >>>>> (**) FontPath set to:
> >> >>>>> /usr/local/lib/X11/fonts/misc/,
> >> >>>>> /usr/local/lib/X11/fonts/TTF/,
> >> >>>>> /usr/local/lib/X11/fonts/OTF,
> >> >>>>> /usr/local/lib/X11/fonts/misc/,
> >> >>>>> /usr/local/lib/X11/fonts/TTF/,
> >> >>>>> /usr/local/lib/X11/fonts/OTF,
> >> >>>>> built-ins
> >> >>>>> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> >> >>>>> (II) Loader magic: 0x6a0
> >> >>>>> (II) Module ABI versions:
> >> >>>>> X.Org ANSI C Emulation: 0.4
> >> >>>>> X.Org Video Driver: 5.0
> >> >>>>> X.Org XInput driver : 4.0
> >> >>>>> X.Org Server Extension : 2.0
> >> >>>>> (II) Loader running on freebsd
> >> >>>>> (--) Using syscons driver with X support (version 2.0)
> >> >>>>> (--) using VT number 9
> >> >>>>>
> >> >>>>> (!!) More than one possible primary device found
> >> >>>>> (--) PCI: (0 at 0:1:0) ATI Technologies Inc Rage XL rev 39, Mem @
> >> >>>>> 0xfb000000/16777216, 0xfcaff000/4096, I/O @ 0x0000d800/256, BIOS @
> >> >>>>> 0x????????/131072
> >> >>>>> (--) PCI: (0 at 1:2:0) nVidia Corporation NV17 [GeForce4 MX 440]
> >> rev 163,
> >> >>>>> Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xfa580000/524288,
> >> >>>>> BIOS @ 0x????????/131072
> >> >>>>> (II) System resource ranges:
> >> >>>>> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> >> >>>>> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> >> >>>>> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> >> >>>>> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> >> >>>>> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> >> >>>>> (II) "extmod" will be loaded. This was enabled by default and also
> >> >>>>> specified in the config file.
> >> >>>>> (II) "dbe" will be loaded. This was enabled by default and also
> >> >>>>> specified in the config file.
> >> >>>>> (II) "glx" will be loaded. This was enabled by default and also
> >> >>>>> specified in the config file.
> >> >>>>> (II) "record" will be loaded. This was enabled by default and also
> >> >>>>> specified in the config file.
> >> >>>>> (II) "dri" will be loaded. This was enabled by default and also
> >> >>>>> specified in the config file.
> >> >>>>> (II) "dri2" will be loaded. This was enabled by default and also
> >> >>>>> specified in the config file.
> >> >>>>> (II) LoadModule: "extmod"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> >> >>>>> (II) Module extmod: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.0.0
> >> >>>>> Module class: X.Org Server Extension
> >> >>>>> ABI class: X.Org Server Extension, version 2.0
> >> >>>>> (II) Loading extension MIT-SCREEN-SAVER
> >> >>>>> (II) Loading extension XFree86-VidModeExtension
> >> >>>>> (II) Loading extension XFree86-DGA
> >> >>>>> (II) Loading extension DPMS
> >> >>>>> (II) Loading extension XVideo
> >> >>>>> (II) Loading extension XVideo-MotionCompensation
> >> >>>>> (II) Loading extension X-Resource
> >> >>>>> (II) LoadModule: "record"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> >> >>>>> (II) Module record: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.13.0
> >> >>>>> Module class: X.Org Server Extension
> >> >>>>> ABI class: X.Org Server Extension, version 2.0
> >> >>>>> (II) Loading extension RECORD
> >> >>>>> (II) LoadModule: "dbe"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> >> >>>>> (II) Module dbe: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.0.0
> >> >>>>> Module class: X.Org Server Extension
> >> >>>>> ABI class: X.Org Server Extension, version 2.0
> >> >>>>> (II) Loading extension DOUBLE-BUFFER
> >> >>>>> (II) LoadModule: "extmod"
> >> >>>>> (II) Reloading /usr/local/lib/xorg/modules/extensions//libextmod.so
> >> >>>>> (II) Loading extension MIT-SCREEN-SAVER
> >> >>>>> (II) Loading extension XFree86-VidModeExtension
> >> >>>>> (II) Loading extension DPMS
> >> >>>>> (II) Loading extension XVideo
> >> >>>>> (II) Loading extension XVideo-MotionCompensation
> >> >>>>> (II) Loading extension X-Resource
> >> >>>>> (II) LoadModule: "glx"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> >> >>>>> (II) Module glx: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.0.0
> >> >>>>> ABI class: X.Org Server Extension, version 2.0
> >> >>>>> (==) AIGLX disabled
> >> >>>>> (II) Loading extension GLX
> >> >>>>> (II) LoadModule: "dri"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> >> >>>>> (II) Module dri: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.0.0
> >> >>>>> ABI class: X.Org Server Extension, version 2.0
> >> >>>>> (II) Loading extension XFree86-DRI
> >> >>>>> (II) LoadModule: "dri2"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> >> >>>>> (II) Module dri2: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.0.0
> >> >>>>> ABI class: X.Org Server Extension, version 2.0
> >> >>>>> (II) Loading extension DRI2
> >> >>>>> (II) LoadModule: "nv"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
> >> >>>>> (II) Module nv: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 2.1.13
> >> >>>>> Module class: X.Org Video Driver
> >> >>>>> ABI class: X.Org Video Driver, version 5.0
> >> >>>>> (II) LoadModule: "mouse"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
> >> >>>>> (II) Module mouse: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.4.0
> >> >>>>> Module class: X.Org XInput Driver
> >> >>>>> ABI class: X.Org XInput driver, version 4.0
> >> >>>>> (II) LoadModule: "kbd"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
> >> >>>>> (II) Module kbd: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.3.2
> >> >>>>> Module class: X.Org XInput Driver
> >> >>>>> ABI class: X.Org XInput driver, version 4.0
> >> >>>>> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
> >> >>>>> Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
> >> >>>>> Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2
> >> MX/MX 400,
> >> >>>>> GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
> >> >>>>> GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti,
> >> GeForce2 Ultra,
> >> >>>>> Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
> >> >>>>> GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
> >> >>>>> GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
> >> >>>>> GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
> >> >>>>> GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
> >> >>>>> GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
> >> >>>>> GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4
> >> 580 XGL,
> >> >>>>> Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
> >> >>>>> GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
> >> >>>>> GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
> >> >>>>> GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL,
> >> Quadro4 750 XGL,
> >> >>>>> Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
> >> >>>>> GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
> >> >>>>> Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
> >> >>>>> GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
> >> >>>>> GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
> >> >>>>> GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
> >> >>>>> GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
> >> >>>>> GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
> >> >>>>> GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
> >> >>>>> Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
> >> >>>>> GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX
> >> 5900 Ultra,
> >> >>>>> GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
> >> >>>>> GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
> >> >>>>> GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
> >> >>>>> GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
> >> >>>>> Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra,
> >> GeForce 6800,
> >> >>>>> GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce
> >> 6800 GT,
> >> >>>>> GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
> >> >>>>> GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
> >> >>>>> GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
> >> >>>>> Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
> >> >>>>> GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
> >> >>>>> GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
> >> >>>>> GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
> >> >>>>> Quadro FX 540, GeForce 6200, GeForce 6500,
> >> >>>>> GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
> >> >>>>> GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
> >> >>>>> GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
> >> >>>>> GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
> >> >>>>> GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce
> >> 7800 GTX,
> >> >>>>> GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce
> >> Go 7800,
> >> >>>>> GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
> >> >>>>> GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce
> >> Go 7400,
> >> >>>>> GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M,
> >> Quadro FX 350M,
> >> >>>>> GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
> >> >>>>> GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce
> >> 7300 GT,
> >> >>>>> GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
> >> >>>>> Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro
> >> FX 560,
> >> >>>>> GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
> >> >>>>> GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
> >> >>>>> Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
> >> >>>>> Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
> >> >>>>> GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce
> >> 8800 GTS,
> >> >>>>> GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce
> >> 8600 GTS,
> >> >>>>> GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce
> >> 8400 GS,
> >> >>>>> GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
> >> >>>>> GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
> >> >>>>> Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
> >> >>>>> GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce
> >> 8400 GS,
> >> >>>>> GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
> >> >>>>> GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro
> >> NVS 135M,
> >> >>>>> GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
> >> >>>>> GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
> >> >>>>> GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
> >> >>>>> GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
> >> >>>>> GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
> >> >>>>> GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro
> >> FX 3600M,
> >> >>>>> GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
> >> >>>>> GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
> >> >>>>> GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
> >> >>>>> GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce
> >> 9300M GS,
> >> >>>>> GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro
> >> NVS 160M
> >> >>>>> (II) Primary Device is: (--) NV: Found NVIDIA GeForce4 MX 440 at
> >> >>>>> 01 at 00:02:0
> >> >>>>> (II) resource ranges after probing:
> >> >>>>> [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> >> >>>>> [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> >> >>>>> [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> >> >>>>> [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> >> >>>>> [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> >> >>>>> (II) Loading sub module "int10"
> >> >>>>> (II) LoadModule: "int10"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules//libint10.so
> >> >>>>> (II) Module int10: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 1.0.0
> >> >>>>> ABI class: X.Org Video Driver, version 5.0
> >> >>>>> (II) NV(0): Initializing int10
> >> >>>>> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
> >> >>>>> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
> >> >>>>> (--) NV(0): Chipset: "GeForce4 MX 440"
> >> >>>>> (**) NV(0): Depth 24, (--) framebuffer bpp 32
> >> >>>>> (==) NV(0): RGB weight 888
> >> >>>>> (==) NV(0): Default visual is TrueColor
> >> >>>>> (II) Loading sub module "vgahw"
> >> >>>>> (II) LoadModule: "vgahw"
> >> >>>>> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> >> >>>>> (II) Module vgahw: vendor="X.Org Foundation"
> >> >>>>> compiled for 1.6.0, module version = 0.1.0
> >> >>>>> ABI class: X.Org Video Driver, version 5.0
> >> >>>>> (**) NV(0): Option "CrtcNumber" "0"
> >> >>>>> (==) NV(0): Using HW cursor
> >> >>>>> (--) NV(0): Linear framebuffer at 0xF0000000
> >> >>>>> (--) NV(0): MMIO registers at 0xFD000000
> >> >>>>> (II) Loading sub module "i2c"
> >> >>>>>
> >> >> _______________________________________________
> >> >> freebsd-stable at freebsd.org mailing list
> >> >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> >> >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
> >> >>
> >> >>
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > freebsd-stable at freebsd.org mailing list
> >> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> >> > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
> >> >
> >> >
> >>
> >>
> >>
> >> _______________________________________________
> >> freebsd-stable at freebsd.org mailing list
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
> > --
> > Robert Noland <rnoland at FreeBSD.org>
> > FreeBSD
> >
>
>
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
--
Robert Noland <rnoland at FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20090519/c4ece0d4/attachment.pgp
More information about the freebsd-stable
mailing list