kernel trap 12 with interrupts disabled [bge0 on 7.2R]

Thu May 14 12:05:41 UTC 2009

Hi,

I've received a panic today on RELEASE 7.2 with bge(4). We have got
an apache 2.2 running that mounts an NFS share from a file server.
We have put some load on it, because we
have downloaded big files (700MB) for installation on two
workstations, about 15 of files were downloaded at the same time.

After about 20 minutes we received a panic output 2 times. I wrote it
down on paper. I could not access the debugger, because the output of
the panic stopped almost at the end. I've got only an USB keyboard that
would not help in this situation. It wasn't even plugged in.

Btw, promiscuous mode is enabled, because ipcad is running to count
traffic. I've got this problem the second time now.

The panic looks like this:

kernel trap 12 with interrupts disabled

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 0
fault virtual address = 0x80000000000
fault code = supervisor write data, page not present
instruction pointer = 0x8:0xffffffff80186249
stack pointer = 0x10:0xffffffff8065f200
frame pointer = 0x10:0x36ee7f
code segment = base 0x0, limit 0xfffff, type 0x1b
             = DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = resume, IOPL = 0
current process = 26 (irq256: bge0)
trap number = 12
p[*CURSOR STOPPED HERE*]

dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved. FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Wed May  6 10:18:03 CEST 2009
    root at inky:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU           X3350  @ 2.66GHz (2666.63-MHz
K8-class CPU) Origin = "GenuineIntel"  Id = 0x10677  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 4
usable memory = 8576458752 (8179 MB)
avail memory  = 8290664448 (7906 MB)
ACPI APIC Table: <022108 APIC2247>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <022108 RSDT2247> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, eff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci5: <ACPI PCI bus> on pcib1
3ware device driver for 9000 series storage controllers, version:
3.70.05.001 twa0: <3ware 9000 series Storage Controller> port
0xe800-0xe8ff mem 0xfc000000-0xfdffffff,0xfebff000-0xfebfffff irq 16 at
device 0.0 on pci5 twa0: [ITHREAD] twa0: INFO: (0x15: 0x1300):
Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X
4.06.00.004, BIOS BE9X 4.05.00.015 pcib2: <ACPI PCI-PCI bridge> irq 16
at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI
PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x4201> mem 0xfe9f0000-0xfe9fffff irq 16 at device 0.0 on pci3 miibus0:
0x4201> <MII bus> on bge0  
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto bge0: Ethernet address: xx:xx:xx:xx:xx:xx
bge0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev.
0x4201> mem 0xfeaf0000-0xfeafffff irq 17 at device 0.0 on pci4 miibus1:
0x4201> <MII bus> on bge1  
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto bge1: Ethernet address: yy:yy:yy:yy:yy:yy
bge1: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xc080-0xc09f irq 23 at
device 29.0 on pci0 uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xc000-0xc01f irq 19 at
device 29.1 on pci0 uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xfe7ff800-0xfe7ffbff irq 23 at device 29.7 on pci0 ehci0:
[GIANT-LOCKED] ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xdc00-0xdc7f mem
0xf8000000-0xfbffffff,0xfe8c0000-0xfe8fffff at device 4.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on
pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port
0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f
mem 0xfe7ffc00-0xfe7fffff irq 19 at device 31.2 on pci0 atapci1:
[ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0 sio0: type 16550A
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  77,
should be 74 [20070320] est0: <Enhanced SpeedStep Frequency Control> on
cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 ukbd0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/0.32,
addr 2> on uhub0 kbd2 at ukbd0
uhid0: <vendor 0x046a product 0x0023, class 0/0, rev 2.00/0.32, addr 2>
on uhub0 Timecounters tick every 1.000 msec
acd0: DVDR <ASUS DRW-1612BL/1.06> at ata0-slave UDMA66
da0 at twa0 bus 0 target 0 lun 0
da0: <AMCC 9650SE-2LP DISK 4.06> Fixed Direct Access SCSI-5 device 
da0: 100.000MB/s transfers
da0: 476827MB (976541696 512 byte sectors: 255H 63S/T 60786C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
GEOM_LABEL: Label for provider da0p2 is ufsid/4933dfd79a3e27cc.
GEOM_LABEL: Label for provider da0p4 is ufsid/4933dfe53ca04410.
GEOM_LABEL: Label for provider da0p5 is ufsid/4933dfedbb4398a4.
GEOM_JOURNAL: Journal 326427402: da0p6 contains data.
GEOM_JOURNAL: Journal 326427402: da0p6 contains journal.
GEOM_JOURNAL: Journal da0p6 clean.
GEOM_LABEL: Label for provider da0p6.journal is ufsid/4933e04607a73efa.
Trying to mount root from ufs:/dev/da0p2
GEOM_LABEL: Label ufsid/4933dfd79a3e27cc removed.
GEOM_LABEL: Label for provider da0p2 is ufsid/4933dfd79a3e27cc.
GEOM_LABEL: Label ufsid/4933dfe53ca04410 removed.
GEOM_LABEL: Label for provider da0p4 is ufsid/4933dfe53ca04410.
GEOM_LABEL: Label ufsid/4933dfedbb4398a4 removed.
GEOM_LABEL: Label for provider da0p5 is ufsid/4933dfedbb4398a4.
GEOM_LABEL: Label ufsid/4933dfd79a3e27cc removed.
GEOM_LABEL: Label ufsid/4933dfe53ca04410 removed.
GEOM_LABEL: Label ufsid/4933dfedbb4398a4 removed.
GEOM_LABEL: Label ufsid/4933e04607a73efa removed.
bge0: promiscuous mode enabled

--
Martin
__________________________________________________________________________
Verschicken Sie SMS direkt vom Postfach aus - in alle deutschen und viele 
ausländische Netze zum gleichen Preis! 
https://produkte.web.de/webde_sms/sms