aliases not working in em0

[Wendell Martins Borges]

I had a 7.0 server and my card worked fine, upgraded to 7.1 and  
aliases stopped working, below some information from my server.

# uname -a
FreeBSD stewie.ramenzoni.com.br 7.1-RELEASE FreeBSD 7.1-RELEASE #0:  
Thu Jan  1 14:37:25 UTC 2009     root at logan.cse.buffalo.edu:/usr/obj/ 
usr/src/sys/GENERIC  i386

# ifconfig em0

em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu  
1500
         options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
         ether 00:15:17:16:bf:9a
         inet 192.168.112.1 netmask 0xffffff00 broadcast 192.168.112.255
         inet 192.168.112.181 netmask 0xffffffff broadcast  
192.168.112.181
         media: Ethernet autoselect (100baseTX <full-duplex>)
         status: active

# cat /etc/rc.conf

ifconfig_em0="inet 192.168.112.1 netmask 255.255.255.0"
ifconfig_em0_alias0="inet 192.168.112.181 netmask 255.255.255.255"


# pciconf -vl

em0 at pci0:1:0:0: class=0x020000 card=0x10848086 chip=0x107d8086  
rev=0x06 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'PRO/1000 PT'
     class      = network
     subclass   = ethernet

# dmesg | grep em0
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xece0-0xecff  
mem 0xfe9e0000-0xfe9fffff,0xfe9c0000-0xfe9dffff irq 16 at device 0.0  
on pci1
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:15:17:16:bf:9a



--

best regards,

Wendell Martins Borges
Administrador de Redes e Sistemas
Inds. Papel R. Ramenzoni S/A