more marvell marvels
Danny Braniss
danny at cs.huji.ac.il
Fri Jan 9 06:15:15 PST 2009
> On Fri, Jan 09, 2009 at 01:48:24PM +0200, Danny Braniss wrote:
> > hi, the mb is asus P5K-VM, the onboard nic is, acccording to pciconf:
> >
> > mskc0 at pci0:1:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab
> > rev=0x12 hdr=0x00
> > vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
> > device = '88E8056 Yukon PCI-E Gigabit Ethernet Controller'
> > class = network
> > subclass = ethernet
> > cap 01[48] = powerspec 3 supports D0 D1 D2 D3 current D0
> > cap 03[50] = VPD
> > cap 05[5c] = MSI supports 1 message, 64 bit
> > cap 10[e0] = PCI-Express 1 legacy endpoint
> >
> > nothing new here, problems have been reported before, but:
> >
> > my very first attempt - after a very long time - of booting 7.1-stable,
> > produced
> > a panic because msk could not find its physio, by the time i had the serial
> > console
> > attached and working, that problem disappeared :-(
> > now, after reboot, it sometimes hangs - because the net is not working, and
> > only if
> > I unplug the ethernet, (no signs of the driver seeing this), and replug things
> > begin
> > to work. btw, i had to set
> > hw.msk.legacy_intr="1"
> > to get things working.
> >
> > any patches for 7.1-stable to test?
> >
>
> If memory serve me right you have Yukon EC Ultra with 88E1149 PHY,
> right?
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
auto
mskc0: [ITHREAD]
> CURRENT has some stability fixes but the source wouldn't be
> compiled on stable/7 yet due to KPI differences. I have plan to add
> some features in next week which make it possible to use HEAD
> version on stable/7.
>
> I'm not sure the patch for 88E8040 could be applied to stable/7
> but the patch has some fixes for link state handling. Would you
> give it try?
> http://people.freebsd.org/~yongari/msk/msk.88E8040.patch14
> Note, the 88E8040 patch is not complete yet and may cause other
> problems too.
I'll try asap
thanks,
danny
>
> --
> Regards,
> Pyun YongHyeon
More information about the freebsd-stable
mailing list