Problem with new Intel DX board and i7 Processor on reboot
attempt (locks)
Mike Tancsa
mike at sentex.net
Wed Feb 18 14:30:52 PST 2009
At 01:08 PM 2/18/2009, Karl Denninger wrote:
>Running 7-STABLE, compiled last night.
>
>When attempting to reboot the system freezes at "stopping other
>CPUs" and has to be hard-reset with either the power button or the
>RESET switch. The problem is easily reproduced - typing "reboot"
>produces it :-)
>
>I'm wondering if that ACPI warning in the boot sequence is involved
>in this, and if so, if there is a recommended workaround?
>
>Here's the "dmesg" from the subject system:
Hi,
I have the same chipset, but dont see the reboot problem on
RELENG_7 from Jan 7th. (via "shutdown -r now") Have you checked for
BIOS updates ?
---Mike
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2666.77-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,
HTT,TM,PBE>
Features2=0x98e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100000<NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Cores per package: 8
Logical CPUs per core: 2
real memory = 3212734464 (3063 MB)
avail memory = 3139563520 (2994 MB)
ACPI APIC Table: <INTEL DX58SO >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has zero
address or length: 0 450/0 [20070320]
ioapic0 <Version 2.0> irqs 0-23 on motherboard
>Copyright (c) 1992-2009 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD is a registered trademark of The FreeBSD Foundation.
>FreeBSD 7.1-STABLE #0: Wed Feb 18 00:38:33 CST 2009
> karl at Dbms2.denninger.net:/usr/obj/usr/src/sys/GENERIC
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (2666.78-MHz
>K8-class CPU)
> Origin = "GenuineIntel" Id = 0x106a4 Stepping = 4
>
>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
>Features2=0x98e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,<b19>,<b20>,<b23>>
> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 8
> Logical CPUs per core: 2
>usable memory = 6418419712 (6121 MB)
>avail memory = 6181691392 (5895 MB)
>ACPI APIC Table: <INTEL DX58SO >
>FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
>cpu0 (BSP): APIC ID: 0
>cpu1 (AP): APIC ID: 1
>cpu2 (AP): APIC ID: 2
>cpu3 (AP): APIC ID: 3
>cpu4 (AP): APIC ID: 4
>cpu5 (AP): APIC ID: 5
>cpu6 (AP): APIC ID: 6
>cpu7 (AP): APIC ID: 7
>ACPI Warning (tbfadt-0505): Optional field "Pm2ControlBlock" has
>zero address or length: 0 450/0 [20070320]
>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>lapic0: Forcing LINT1 to edge trigger
>kbd1 at kbdmux0
>ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>acpi0: <INTEL DX58SO> on motherboard
>acpi0: [ITHREAD]
>acpi0: Power Button (fixed)
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
>acpi_button0: <Sleep Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
>pci1: <ACPI PCI bus> on pcib1
>pcib2: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
>pci2: <ACPI PCI bus> on pcib2
>vgapci0: <VGA-compatible display> mem
>0xd1000000-0xd1ffffff,0xe0000000-0xefffffff,0xd0000000-0xd0ffffff
>irq 16 at device 0.0 on pci2
>pcib3: <ACPI PCI-PCI bridge> irq 16 at device 7.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>3ware device driver for 9000 series storage controllers, version: 3.70.05.001
>twa0: <3ware 9000 series Storage Controller> port 0x2000-0x20ff mem
>0xf0000000-0xf1ffffff,0xd2200000-0xd2200fff irq 16 at device 0.0 on pci3
>twa0: [ITHREAD]
>twa0: INFO: (0x04: 0x0053): Battery capacity test is overdue:
>twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-8LPML,
>8 ports, Firmware FE9X 4.06.00.004, BIOS BE9X 4.05.00.015
>pci0: <base peripheral, interrupt controller> at device 16.0 (no
>driver attached)
>pci0: <base peripheral, interrupt controller> at device 16.1 (no
>driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.0 (no
>driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.1 (no
>driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.2 (no
>driver attached)
>pci0: <base peripheral, interrupt controller> at device 20.3 (no
>driver attached)
>em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x30e0-0x30ff
>mem 0xd2300000-0xd231ffff,0xd2322000-0xd2322fff irq 20 at device 25.0 on pci0
>em0: Using MSI interrupt
>em0: [FILTER]
>em0: Ethernet address: 00:1c:c0:94:a5:39
>uhci0: <UHCI (generic) USB controller> port 0x30c0-0x30df irq 16 at
>device 26.0 on pci0
>uhci0: [GIANT-LOCKED]
>uhci0: [ITHREAD]
>usb0: <UHCI (generic) USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 21 at
>device 26.1 on pci0
>uhci1: [GIANT-LOCKED]
>uhci1: [ITHREAD]
>usb1: <UHCI (generic) USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <UHCI (generic) USB controller> port 0x3080-0x309f irq 19 at
>device 26.2 on pci0
>uhci2: [GIANT-LOCKED]
>uhci2: [ITHREAD]
>usb2: <UHCI (generic) USB controller> on uhci2
>usb2: USB revision 1.0
>uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
>uhub2: 2 ports with 2 removable, self powered
>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd2321000-0xd23213ff
>irq 18 at d
>evice 26.7 on pci0
>ehci0: [GIANT-LOCKED]
>ehci0: [ITHREAD]
>usb3: EHCI version 1.0
>usb3: companion controllers, 2 ports each: usb0 usb1 usb2
>usb3: <EHCI (generic) USB 2.0 controller> on ehci0
>usb3: USB revision 2.0
>uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
>uhub3: 6 ports with 6 removable, self powered
>pci0: <multimedia, HDA> at device 27.0 (no driver attached)
>pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
>pci4: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
>pci5: <ACPI PCI bus> on pcib5
>pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
>pci6: <ACPI PCI bus> on pcib6
>atapci0: <Marvell 88SX6121 UDMA133 controller> port
>0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f
> mem 0xd2100000-0xd21003ff irq 16 at device 0.0 on pci6
>atapci0: [ITHREAD]
>ata2: <ATA channel 0> on atapci0
>ata2: [ITHREAD]
>uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 23 at
>device 29.0 on pci0
>uhci3: [GIANT-LOCKED]
>uhci3: [ITHREAD]
>usb4: <UHCI (generic) USB controller> on uhci3
>usb4: USB revision 1.0
>uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
>uhub4: 2 ports with 2 removable, self powered
>uhci4: <UHCI (generic) USB controller> port 0x3040-0x305f irq 19 at
>device 29.1 on pci0
>uhci4: [GIANT-LOCKED]
>uhci4: [ITHREAD]
>usb5: <UHCI (generic) USB controller> on uhci4
>usb5: USB revision 1.0
>uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
>uhub5: 2 ports with 2 removable, self powered
>uhci5: <UHCI (generic) USB controller> port 0x3020-0x303f irq 18 at
>device 29.2 on pci0
>uhci5: [GIANT-LOCKED]
>uhci5: [ITHREAD]
>usb6: <UHCI (generic) USB controller> on uhci5
>usb6: USB revision 1.0
>uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
>uhub6: 2 ports with 2 removable, self powered
>ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd2320000-0xd23203ff
>irq 23 at device 29.7 on pci0
>ehci1: [GIANT-LOCKED]
>ehci1: [ITHREAD]
>usb7: EHCI version 1.0
>usb7: companion controllers, 2 ports each: usb4 usb5 usb6
>usb7: <EHCI (generic) USB 2.0 controller> on ehci1
>usb7: USB revision 2.0
>uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
>uhub7: 6 ports with 6 removable, self powered
>pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pci7: <ACPI PCI bus> on pcib7
>fwohci0: <Texas Instruments TSB43AB22/A> mem
>0xd2004000-0xd20047ff,0xd2000000-0xd2003fff irq 19 at device 3.0 on pci7
>fwohci0: [FILTER]
>fwohci0: OHCI version 1.10 (ROM=0)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 00:90:27:00:02:3f:c4:9c
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>dcons_crom0: <dcons configuration ROM> on firewire0
>dcons_crom0: bus_addr 0x15dc000
>fwe0: <Ethernet over FireWire> on firewire0
>if_fwe0: Fake Ethernet address: 02:90:27:3f:c4:9c
>fwe0: Ethernet address: 02:90:27:3f:c4:9c
>fwip0: <IP over FireWire> on firewire0
>fwip0: Firewire address: 00:90:27:00:02:3f:c4:9c @ 0xfffe00000000,
>S400, maxrec 2048
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>fwohci0: Initiate bus reset
>fwohci0: BUS reset
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci1: <Intel ICH10 SATA300 controller> port
>0x3158-0x315f,0x316c-0x316f,0x3150-0x3157,0x3168-0x316b,0x3130-0x313f,0x3120-0x312f
>irq 19 at device 31.2 on pci0
>atapci1: [ITHREAD]
>ata3: <ATA channel 0> on atapci1
>ata3: [ITHREAD]
>ata4: <ATA channel 1> on atapci1
>ata4: [ITHREAD]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>atapci2: <Intel ICH10 SATA300 controller> port
>0x3148-0x314f,0x3164-0x3167,0x3140-0x3147,0x3160-0x3163,0x3110-0x311f,0x3100-0x310f
>irq 18 at device 31.5 on pci0
>atapci2: [ITHREAD]
>ata5: <ATA channel 0> on atapci2
>ata5: [ITHREAD]
>ata6: <ATA channel 1> on atapci2
>ata6: [ITHREAD]
>fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f0 irq 6 drq 2 on acpi0
>fdc0: [FILTER]
>cpu0: <ACPI CPU> on acpi0
>est0: <Enhanced SpeedStep Frequency Control> on cpu0
>p4tcc0: <CPU Frequency Thermal Control> on cpu0
>cpu1: <ACPI CPU> on acpi0
>est1: <Enhanced SpeedStep Frequency Control> on cpu1
>p4tcc1: <CPU Frequency Thermal Control> on cpu1
>cpu2: <ACPI CPU> on acpi0
>est2: <Enhanced SpeedStep Frequency Control> on cpu2
>p4tcc2: <CPU Frequency Thermal Control> on cpu2
>cpu3: <ACPI CPU> on acpi0
>est3: <Enhanced SpeedStep Frequency Control> on cpu3
>p4tcc3: <CPU Frequency Thermal Control> on cpu3
>cpu4: <ACPI CPU> on acpi0
>est4: <Enhanced SpeedStep Frequency Control> on cpu4
>p4tcc4: <CPU Frequency Thermal Control> on cpu4
>cpu5: <ACPI CPU> on acpi0
>est5: <Enhanced SpeedStep Frequency Control> on cpu5
>p4tcc5: <CPU Frequency Thermal Control> on cpu5
>cpu6: <ACPI CPU> on acpi0
>est6: <Enhanced SpeedStep Frequency Control> on cpu6
>p4tcc6: <CPU Frequency Thermal Control> on cpu6
>cpu7: <ACPI CPU> on acpi0
>est7: <Enhanced SpeedStep Frequency Control> on cpu7
>p4tcc7: <CPU Frequency Thermal Control> on cpu7
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xd0fff on isa0
>ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
>ata0: [ITHREAD]
>ata1 at port 0x170-0x177,0x376 irq 15 on isa0
>ata1: [ITHREAD]
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>atkbd0: [ITHREAD]
>ppc0: cannot reserve I/O port range
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 8250 or not responding
>sio0: [FILTER]
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>sio1: type 16550A
>sio1: [FILTER]
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>Timecounters tick every 1.000 msec
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>da0 at twa0 bus 0 target 0 lun 0
>da0: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
>da0: 100.000MB/s transfers
>da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
>da1 at twa0 bus 0 target 1 lun 0
>da1: <AMCC 9650SE-8LP DISK 4.06> Fixed Direct Access SCSI-5 device
>da1: 100.000MB/s transfers
>da1: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
>acd0: DVDR <SONY DVD RW DRU-V200S/1.60> at ata3-master SATA150
>lapic1: Forcing LINT1 to edge trigger
>SMP: AP CPU #1 Launched!
>lapic4: Forcing LINT1 to edge trigger
>SMP: AP CPU #4 Launched!
>lapic2: Forcing LINT1 to edge trigger
>SMP: AP CPU #2 Launched!
>lapic5: Forcing LINT1 to edge trigger
>SMP: AP CPU #5 Launched!
>lapic7: Forcing LINT1 to edge trigger
>SMP: AP CPU #7 Launched!
>lapic3: Forcing LINT1 to edge trigger
>SMP: AP CPU #3 Launched!
>lapic6: Forcing LINT1 to edge trigger
>SMP: AP CPU #6 Launched!
>Trying to mount root from ufs:/dev/da0s1a
>ukbd0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on uhub1
>kbd2 at ukbd0
>uhid0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on uhub1
>em0: link state changed to UP
>
>--
>--
>Karl Denninger
>karl at denninger.net
>
>
>
>
>_______________________________________________
>freebsd-stable at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
More information about the freebsd-stable
mailing list