Driver for Intel 10GbE adapter
Greg Rivers
gcr+freebsd-stable at tharned.org
Wed Feb 11 14:59:18 PST 2009
I'm trying to light an Intel 10GbE adapter in an HP DL380 G5 using very
recent 7.1-STABLE amd64 with GENERIC kernel. I expected the ixbg(4)
driver to attach, but it does not.
The labels on the card show:
INTEL(R) 10GbE XF SR 2 PORT SERVER ADAPTER
893135
EXPX9502FXSRGP5
001B211170BE 028AD E15728-003
A verbose boot shows the card on the PCI bus, but no driver attaches:
pcib11: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib11: domain 0
pcib11: secondary bus 23
pcib11: subordinate bus 23
pcib11: I/O decode 0x6000-0x6fff
pcib11: memory decode 0xfde00000-0xfdffffff
pcib11: no prefetched decode
pci23: <ACPI PCI bus> on pcib11
pci23: domain=0, physical bus=23
found-> vendor=0x8086, dev=0x10c6, revid=0x01
domain=0, bus=23, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 18 messages in map 0x1c
map[10]: type Memory, range 32, base 0xfdfe0000, size 17, enabled
pcib11: requested memory range 0xfdfe0000-0xfdffffff: good
map[14]: type Memory, range 32, base 0xfdf80000, size 18, enabled
pcib11: requested memory range 0xfdf80000-0xfdfbffff: good
map[18]: type I/O Port, range 32, base 0x6000, size 5, enabled
pcib11: requested I/O range 0x6000-0x601f: in range
map[1c]: type Memory, range 32, base 0xfdf70000, size 14, enabled
pcib11: requested memory range 0xfdf70000-0xfdf73fff: good
pcib11: matched entry for 23.0.INTA
pcib11: slot 0 INTA hardwired to IRQ 19
found-> vendor=0x8086, dev=0x10c6, revid=0x01
domain=0, bus=23, slot=0, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0047, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 18 messages in map 0x1c
map[10]: type Memory, range 32, base 0xfdf40000, size 17, enabled
pcib11: requested memory range 0xfdf40000-0xfdf5ffff: good
map[14]: type Memory, range 32, base 0xfdf00000, size 18, enabled
pcib11: requested memory range 0xfdf00000-0xfdf3ffff: good
map[18]: type I/O Port, range 32, base 0x6020, size 5, enabled
pcib11: requested I/O range 0x6020-0x603f: in range
map[1c]: type Memory, range 32, base 0xfdef0000, size 14, enabled
pcib11: requested memory range 0xfdef0000-0xfdef3fff: good
pcib11: matched entry for 23.0.INTB
pcib11: slot 0 INTB hardwired to IRQ 16
pci23: <network, ethernet> at device 0.0 (no driver attached)
pci23: <network, ethernet> at device 0.1 (no driver attached)
pciconf shows:
none0 at pci0:23:0:0: class=0x020000 card=0xa15f8086 chip=0x10c68086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
none1 at pci0:23:0:1: class=0x020000 card=0xa15f8086 chip=0x10c68086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
class = network
subclass = ethernet
I thought perhaps it would be a simple matter of adding/updating a card ID
in the driver header file, but I see that sys/dev/ixgb/ixgb_ids.h already
contains an entry for 0xA15F as listed above.
Does anyone have experience with this card or know how to get it to probe
and attach? Thanks!
--
Greg Rivers
More information about the freebsd-stable
mailing list