FreeBSD 8.0: can't PXE Boot using nvidia nForce4 network card
Olivier Cochard-Labbé
olivier at cochard.me
Wed Dec 23 13:38:05 UTC 2009
Hi all,
I've got a PC which have 2 bugs with FreeBSD 8.0: It can't boot from
USB (usb/139142) neither from PATA hard-drive (kern/139143).
But I would boot this PC for giving acces to somes FreeBSD devs for debuging it:
Then I've choose boot my buggy PC using PXE, then I've prepared a second PC with
a DHCP/TFTP/NFS/serial-cable this bugguy PC.
I've posted my problem on the FreeBSD forum some weeks ago, but didn't
found usefull help:
http://forums.freebsd.org/showthread.php?t=8324
The up-to-date 8.0-STABLE kernel boot fine from PXE/TFTP, but when it
tries to mount the rootfilesystem from NFS it display an errror:
Trying to mount root from nfs:10.0.0.1:/usr/tftpboot
nfs_diskless: no interface
ROOT MOUNT ERROR:
The network card is a NVIDIA nForce4 CK804 MCP8.
I've seen that the pxe loader populate correctly lot's of the needed
boot variables (boot.netif.ip, boot.netif.netmask, boot.netif.gateway,
etc...) but with the only expection of "boot.netif.name".
It seems to have a problem in /usr/src/sys/nfsclient/nfs_diskless.c
that can't set this variable.
Does some one have any clue for fixing this file ?
Thanks,
Olivier
PS: Here is the full verbose boot messages:
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000000001000
SMAP type=02 base=00000000fee00000 len=0000000000100000
SMAP type=02 base=00000000fefffc00 len=0000000000000400
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=02 base=00000000e0000000 len=0000000010000000
SMAP type=03 base=000000007fff3000 len=000000000000d000
SMAP type=04 base=000000007fff0000 len=0000000000003000
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=01 base=0000000000100000 len=000000007fef0000
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #3: Wed Dec 23 01:14:48 CET 2009
root at debugger.bsdrp.net:/usr/obj/usr/src/sys/GENERIC i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0f79000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2010313531 Hz
CPU: AMD Athlon(tm) 64 Processor 3000+ (2010.31-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20fc2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
WARNING: This architecture revision has known SMP hardware bugs which
may cause random instability
real memory = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001026000 - 0x000000007db9afff, 2092388352 bytes (510837 pages)
avail memory = 2091081728 (1994 MB)
Table 'FACP' at 0x7fff30c0
Table 'MCFG' at 0x7fff96c0
Table 'APIC' at 0x7fff9600
APIC: Found table at 0x7fff9600
MP Configuration Table version 1.4 found at 0xc00f1400
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
ACPI APIC Table: <Nvidia AWRDACPI>
APIC: CPU 0 has ACPI ID 0
bios32: Found BIOS32 Service Directory header at 0xc00fb950
bios32: Entry = 0xf1f80 (c00f1f80) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x1fb0
pnpbios: Found PnP BIOS data at 0xc00fc4d0
pnpbios: Entry = f0000:c500 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ACPI: RSDP 0xf77b0 00014 (v0 Nvidia)
ACPI: RSDT 0x7fff3040 00030 (v1 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x7fff30c0 00074 (v1 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0x7fff3180 06402 (v1 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 0x7fff0000 00040
ACPI: MCFG 0x7fff96c0 0003C (v1 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 0x7fff9600 0006E (v1 Nvidia AWRDACPI 42302E31 AWRD 00000000)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
pcibios: BIOS version 3.00
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI Error: Package List length (6) larger than NumElements count (3), truncated
20090521 dsobject-590
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc50c1000 pa 0x1000
AcpiOsDerivePciId: \_SB_.PCI0.VT86.PDEV -> bus 0 dev 1 func 0
AcpiOsDerivePciId: \_SB_.PCI0.VT86.PIRQ -> bus 0 dev 1 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fef0000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 3 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 7 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16
Validation 0 255 N 0 16
After Disable 0 255 N 0 16
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 17
Validation 0 255 N 0 17
After Disable 0 255 N 0 17
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 18
Validation 0 255 N 0 18
After Disable 0 255 N 0 18
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 19
Validation 0 255 N 0 19
After Disable 0 255 N 0 19
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 16 N 0 16
Validation 0 16 N 0 16
After Disable 0 255 N 0 16
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link28: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link29: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link30: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
pci_link31: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22 23
Validation 0 255 N 0 20 21 22 23
After Disable 0 255 N 0 20 21 22 23
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x005e, revid=0xa3
domain=0, bus=0, slot=0, func=0
class=05-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0050, revid=0xa3
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0052, revid=0xa2
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xdc00, size 10, enabled
map[20]: type I/O Port, range 32, base 0x4c00, size 10, enabled
map[24]: type I/O Port, range 32, base 0x4c40, size 6, enabled
pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.APCS:0)
pci_link26: Picked IRQ 20 with weight 0
pcib0: slot 1 INTA routed to irq 20 via \_SB_.PCI0.APCS
found-> vendor=0x10de, dev=0x005a, revid=0xa2
domain=0, bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd3003000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \_SB_.PCI0.APCF:0)
pci_link21: Picked IRQ 21 with weight 0
pcib0: slot 2 INTA routed to irq 21 via \_SB_.PCI0.APCF
unknown: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x80000000
ohci early: SMM active, request owner change
ohci early: SMM does not respond, resetting
found-> vendor=0x10de, dev=0x0053, revid=0xf2
domain=0, bus=0, slot=6, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xf000, size 12, enabled
found-> vendor=0x10de, dev=0x0054, revid=0xf3
domain=0, bus=0, slot=7, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x9f0, size 4, enabled
map[14]: type I/O Port, range 32, base 0xbf0, size 4, enabled
map[18]: type I/O Port, range 32, base 0x970, size 4, enabled
map[1c]: type I/O Port, range 32, base 0xb70, size 4, enabled
map[20]: type I/O Port, range 32, base 0xd800, size 11, enabled
map[24]: type Memory, range 32, base 0xd3002000, size 13, enabled
pcib0: matched entry for 0.7.INTA (src \_SB_.PCI0.APSI:0)
pci_link29: Picked IRQ 22 with weight 0
pcib0: slot 7 INTA routed to irq 22 via \_SB_.PCI0.APSI
found-> vendor=0x10de, dev=0x0055, revid=0xf3
domain=0, bus=0, slot=8, func=0
class=01-01-85, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x9e0, size 5, enabled
map[14]: type I/O Port, range 32, base 0xbe0, size 5, enabled
map[18]: type I/O Port, range 32, base 0x960, size 5, enabled
map[1c]: type I/O Port, range 32, base 0xb60, size 5, enabled
map[20]: type I/O Port, range 32, base 0xc400, size 10, enabled
map[24]: type Memory, range 32, base 0xd3001000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.APSJ:0)
pci_link30: Picked IRQ 23 with weight 0
pcib0: slot 8 INTA routed to irq 23 via \_SB_.PCI0.APSJ
found-> vendor=0x10de, dev=0x005c, revid=0xa2
domain=0, bus=0, slot=9, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0056, revid=0xa3
domain=0, bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd3000000, size 24, enabled
map[14]: type I/O Port, range 32, base 0xb000, size 12, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.APCH:0)
pci_link23: Picked IRQ 21 with weight 1
pcib0: slot 10 INTA routed to irq 21 via \_SB_.PCI0.APCH
found-> vendor=0x10de, dev=0x005d, revid=0xa3
domain=0, bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x005d, revid=0xa3
domain=0, bus=0, slot=12, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x005d, revid=0xa3
domain=0, bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x005d, revid=0xa3
domain=0, bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0x80000000-0x80000fff irq
21 at device 2.0 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 49
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: SMM does not respond, resetting
usbus0: reset timeout
ohci0: USB init failed
device_attach: ohci0 attach returned 6
atapci0: <nVidia nForce CK804 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376 at device 6.0 on pci0
atapci0: Lazy allocation of 0x1000 bytes rid 0x20 type 4 at 0x1000
atapci0: Reserved 0x1000 bytes for rid 0x20 type 4 at 0x1000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce CK804 SATA300 controller> irq 22 at device 7.0 on pci0
atapci1: Lazy allocation of 0x800 bytes rid 0x20 type 4 at 0x2000
atapci1: Reserved 0x800 bytes for rid 0x20 type 4 at 0x2000
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Lazy allocation of 0x2000 bytes rid 0x24 type 3 at 0x80000000
atapci1: Reserved 0x2000 bytes for rid 0x24 type 3 at 0x80000000
ata2: <ATA channel 0> on atapci1
atapci1: Lazy allocation of 0x10 bytes rid 0x10 type 4 at 0x2800
atapci1: Reserved 0x10 bytes for rid 0x10 type 4 at 0x2800
atapci1: Lazy allocation of 0x10 bytes rid 0x14 type 4 at 0x2810
atapci1: Reserved 0x10 bytes for rid 0x14 type 4 at 0x2810
ata2: hardware reset ...
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Lazy allocation of 0x10 bytes rid 0x18 type 4 at 0x2820
atapci1: Reserved 0x10 bytes for rid 0x18 type 4 at 0x2820
atapci1: Lazy allocation of 0x10 bytes rid 0x1c type 4 at 0x2830
atapci1: Reserved 0x10 bytes for rid 0x1c type 4 at 0x2830
ata3: hardware reset ...
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce CK804 SATA300 controller> irq 23 at device 8.0 on pci0
atapci2: Lazy allocation of 0x400 bytes rid 0x20 type 4 at 0x2c00
atapci2: Reserved 0x400 bytes for rid 0x20 type 4 at 0x2c00
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Lazy allocation of 0x1000 bytes rid 0x24 type 3 at 0x80002000
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0x80002000
ata4: <ATA channel 0> on atapci2
atapci2: Lazy allocation of 0x20 bytes rid 0x10 type 4 at 0x2840
atapci2: Reserved 0x20 bytes for rid 0x10 type 4 at 0x2840
atapci2: Lazy allocation of 0x20 bytes rid 0x14 type 4 at 0x2860
atapci2: Reserved 0x20 bytes for rid 0x14 type 4 at 0x2860
ata4: hardware reset ...
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
atapci2: Lazy allocation of 0x20 bytes rid 0x18 type 4 at 0x2880
atapci2: Reserved 0x20 bytes for rid 0x18 type 4 at 0x2880
atapci2: Lazy allocation of 0x20 bytes rid 0x1c type 4 at 0x28a0
atapci2: Reserved 0x20 bytes for rid 0x1c type 4 at 0x28a0
ata5: hardware reset ...
ata5: [MPSAFE]
ata5: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1: domain 0
pcib1: secondary bus 5
pcib1: subordinate bus 5
pcib1: I/O decode 0xf000-0xfff
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
pci5: <ACPI PCI bus> on pcib1
pci5: domain=0, physical bus=5
nfe0: <NVIDIA nForce4 CK804 MCP8 Networking Adapter> irq 21 at device
10.0 on pci0
nfe0: Lazy allocation of 0x1000000 bytes rid 0x10 type 3 at 0x81000000
nfe0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0x81000000
nfe0: MII without any phy!
device_attach: nfe0 attach returned 6
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib2: domain 0
pcib2: secondary bus 4
pcib2: subordinate bus 4
pcib2: I/O decode 0xf000-0xfff
pcib2: no prefetched decode
pcib2: could not get PCI interrupt routing table for \_SB_.PCI0.XVR3 -
AE_NOT_FOUND
pci4: <ACPI PCI bus> on pcib2
pci4: domain=0, physical bus=4
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: no prefetched decode
pcib3: could not get PCI interrupt routing table for \_SB_.PCI0.XVR2 -
AE_NOT_FOUND
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib4: domain 0
pcib4: secondary bus 2
pcib4: subordinate bus 2
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pcib4: could not get PCI interrupt routing table for \_SB_.PCI0.XVR1 -
AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib4
pci2: domain=0, physical bus=2
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib5: domain 0
pcib5: secondary bus 1
pcib5: subordinate bus 1
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xd0000000-0xd2ffffff
pcib5: prefetched decode 0xc0000000-0xcfffffff
pcib5: could not get PCI interrupt routing table for \_SB_.PCI0.XVR0 -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib5
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x01d3, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xd0000000, size 28, enabled
map[14]: type Prefetchable Memory, range 64, base 0xc0000000,
size 30, enabled
map[1c]: type Memory, range 64, base 0xd1000000, size 24, enabled
pcib0: matched entry for 0.14.INTA (src \_SB_.PCI0.APC3:0)
pci_link18: Picked IRQ 18 with weight 0
pcib0: slot 14 INTA routed to irq 18 via \_SB_.PCI0.APC3
pcib5: slot 0 INTA is routed to irq 18
vgapci0: <VGA-compatible display> irq 18 at device 0.0 on pci1
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 53
uart0: [FILTER]
uart0: fast interrupt
uart0: console (9600,n,8,1)
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
powernow0: <Cool`n'Quiet K8> on cpu0
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff pnpid
ORM0000 on isa0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 54
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 00 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 55
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134104 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100515677 hz
Timecounter "TSC" frequency 2010313531 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00000000
ata0: New devices: 00000000
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
nfs_diskless: no interface
ATA PseudoRAID loaded
Trying to mount root from nfs:10.0.0.1:/usr/tftpboot
nfs_diskless: no interface
ROOT MOUNT ERROR:
If you have invalid mount options, reboot, and first try the following from
the loader prompt:
set vfs.root.mountfrom.options=rw
and then remove invalid mount options from /etc/fstab.
Loader variables:
vfs.root.mountfrom=nfs:10.0.0.1:/usr/tftpboot
vfs.root.mountfrom.options=rw
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:/dev/da0s1a
eg. cd9660:/dev/acd0
This is equivalent to: mount -t cd9660 /dev/acd0 /
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
More information about the freebsd-stable
mailing list