Dell D830, nVidia and FreeBSD-8/amd64
Jonathan Chen
jonc at chen.org.nz
Tue Dec 15 02:37:58 UTC 2009
On Mon, Dec 14, 2009 at 10:46:27AM -0500, John Baldwin wrote:
> On Sunday 13 December 2009 2:19:05 pm Jonathan Chen wrote:
> > Hi,
> >
> > This is a general rehash of a problem that I've been having with my
> > Dell Latitude D830 with an nVidia Quadro NVS 140M internal graphics
> > card. I've been using the XOrg's "vesa" driver ever since something in the
> > code rendered the "nvidia" driver inoperable in 7-STABLE sometime mid
> > last year. With nVidia's new 195.22 (BETA) drivers, I had hoped that I
> > could bypass the problem. Unfortunately, I seem to be experiencing the same
> > problem as described in the following thread:
> >
> > http://www.nvnews.net/vbulletin/showthread.php?t=142391
> >
> > which appears to be implying that something in the kernel is
> > interfering with memory allocation. Would it be possible for someone
> > with deeper kernel-fu be able to take a look at this issue?
>
> Do you have a verbose dmesg available?
I've attached a dmesg with a verbose boot. I hope this is what you're
looking for.
--
Jonathan Chen <jonc at chen.org.nz>
----------------------------------------------------------------------
"A little learning is a dangerous thing but a lot of ignorance is
just as bad." - Bob Edwards
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-STABLE #0: Fri Dec 4 08:51:58 NZDT 2009
root at jonathan.chen:/usr/obj/usr/src/sys/GENERIC amd64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81c45000.
Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff81c45210.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff81c45838.
Preloaded elf obj module "/boot/kernel/atapicam.ko" at 0xffffffff81c45ee0.
Preloaded elf obj module "/boot/modules/vboxdrv.ko" at 0xffffffff81c46510.
Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff81c46b00.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2493767975 Hz
CPU: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz (2493.77-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000001c76000 - 0x00000000d76e2fff, 3584479232 bytes (875117 pages)
0x0000000100002000 - 0x000000011ffeffff, 536797184 bytes (131054 pages)
avail memory = 4098859008 (3908 MB)
ACPI APIC Table: <DELL M08 >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xfbb00 00024 (v2 DELL )
ACPI: XSDT 0xdfe5d200 00064 (v1 DELL M08 27D8021C ASL 00000061)
ACPI: FACP 0xdfe5d09c 000F4 (v4 DELL M08 27D8021C ASL 00000061)
ACPI: DSDT 0xdfe5d800 063F7 (v2 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 0xdfe6c000 00040
ACPI: HPET 0xdfe5d300 00038 (v1 DELL M08 00000001 ASL 00000061)
ACPI: APIC 0xdfe5d400 00068 (v1 DELL M08 27D8021C ASL 00000047)
ACPI: ASF! 0xdfe5d000 0007E (v32 DELL M08 27D8021C ASL 00000061)
ACPI: MCFG 0xdfe5d3c0 0003E (v16 DELL M08 27D8021C ASL 00000061)
ACPI: SLIC 0xdfe5d49c 00176 (v1 DELL M08 27D8021C ASL 00000061)
ACPI: TCPA 0xdfe5d700 00032 (v1 00000000 ASL 00000000)
ACPI: SSDT 0xdfe5b97e 004CC (v1 PmRef CpuPm 00003000 INTL 20050624)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <DELL M08 > on motherboard
PCIe: Memory Mapped configuration base @ 0xf4000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.VID_.IGDP -> bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.MCHP -> bus 0 dev 0 func 0
ACPI: SSDT 0xdfe6c080 00043 (v1 LMPWR DELLLOM 00001001 INTL 20050624)
acpi0: wakeup code va 0xffffff800000e000 pa 0x4000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR1 -> bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISAB.PIR2 -> bus 0 dev 31 func 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, dfd5b800 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 9 10 11
Validation 0 255 N 0 9 10 11
After Disable 0 255 N 0 9 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 5 7
Validation 0 255 N 0 5 7
After Disable 0 255 N 0 5 7
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 9 10 11
Validation 0 255 N 0 9 10 11
After Disable 0 255 N 0 9 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 5 7 9 10 11
Validation 0 255 N 0 5 7 9 10 11
After Disable 0 255 N 0 5 7 9 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a00, revid=0x0c
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a01, revid=0x0c
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2834, revid=0x02
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x6f20, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2835, revid=0x02
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x6f00, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x283a, revid=0x02
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfed1c400, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 22
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c400
found-> vendor=0x8086, dev=0x284b, revid=0x02
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfebfc000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x283f, revid=0x02
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2841, revid=0x02
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2845, revid=0x02
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2849, revid=0x02
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x2830, revid=0x02
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x6f80, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2831, revid=0x02
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x6f60, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2832, revid=0x02
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[20]: type I/O Port, range 32, base 0x6f40, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2836, revid=0x02
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xfed1c000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfed1c000
found-> vendor=0x8086, dev=0x2448, revid=0xf2
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2815, revid=0x02
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2850, revid=0x02
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x6fa0, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2828, revid=0x02
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x6eb0, size 3, enabled
map[14]: type I/O Port, range 32, base 0x6eb8, size 2, enabled
map[18]: type I/O Port, range 32, base 0x6ec0, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x6ec8, size 2, enabled
map[20]: type I/O Port, range 32, base 0x6ee0, size 4, enabled
map[24]: type I/O Port, range 32, base 0xeff0, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x283e, revid=0x02
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[10]: type Memory, range 32, base 0xfebfbf00, size 8, enabled
map[20]: type I/O Port, range 32, base 0x10c0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xfa000000-0xfeafffff
pcib1: prefetched decode 0xe0000000-0xefffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0429, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xfd000000, size 24, enabled
pcib1: requested memory range 0xfd000000-0xfdffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xe0000000, size 28, enabled
pcib1: requested memory range 0xe0000000-0xefffffff: good
map[1c]: type Memory, range 64, base 0xfa000000, size 25, enabled
pcib1: requested memory range 0xfa000000-0xfbffffff: good
map[24]: type I/O Port, range 32, base 0xdf00, size 7, enabled
pcib1: requested I/O range 0xdf00-0xdf7f: in range
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfd000000-0xfdffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
nvidia0: <Quadro NVS 140M> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xfd000000
pcib1: vgapci0 requested memory range 0xe0000000-0xefffffff: good
vgapci0: 0x10000000 bytes of rid 0x14 res 3 failed (0, 0xffffffffffffffff).
nvidia0: NVRM: NVIDIA MEM resource alloc failed, BAR1 @ 0x14.
nvidia0: NVRM: NVIDIA hardware alloc failed.
device_attach: nvidia0 attach returned 6
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 20 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f20
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f00
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
hdac0: <Intel 82801H High Definition Audio Controller> mem 0xfebfc000-0xfebfffff irq 21 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20091113_0138
hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfebfc000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 52
hdac0: using IRQ 256 for MSI
hdac0: [MPSAFE]
hdac0: [ITHREAD]
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 11
pcib2: subordinate bus 11
pcib2: I/O decode 0xf000-0xfff
pcib2: no prefetched decode
pci11: <ACPI PCI bus> on pcib2
pci11: domain=0, physical bus=11
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib3: domain 0
pcib3: secondary bus 12
pcib3: subordinate bus 12
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xf9f00000-0xf9ffffff
pcib3: no prefetched decode
pci12: <ACPI PCI bus> on pcib3
pci12: domain=0, physical bus=12
found-> vendor=0x8086, dev=0x4229, revid=0x61
domain=0, bus=12, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf9ffe000, size 13, enabled
pcib3: requested memory range 0xf9ffe000-0xf9ffffff: good
pcib3: matched entry for 12.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
pci12: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib4: domain 0
pcib4: secondary bus 13
pcib4: subordinate bus 14
pcib4: I/O decode 0xc000-0xcfff
pcib4: memory decode 0xf9c00000-0xf9efffff
pcib4: prefetched decode 0xf0000000-0xf01fffff
pci13: <ACPI PCI bus> on pcib4
pci13: domain=0, physical bus=13
pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pcib5: domain 0
pcib5: secondary bus 9
pcib5: subordinate bus 9
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xf9b00000-0xf9bfffff
pcib5: no prefetched decode
pci9: <ACPI PCI bus> on pcib5
pci9: domain=0, physical bus=9
found-> vendor=0x14e4, dev=0x1673, revid=0x02
domain=0, bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf9bf0000, size 16, enabled
pcib5: requested memory range 0xf9bf0000-0xf9bfffff: good
pcib5: matched entry for 9.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 17
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0xa002> mem 0xf9bf0000-0xf9bfffff irq 17 at device 0.0 on pci9
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf9bf0000
bge0: adjust device control 0x2000 -> 0x5000
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 53
bge0: using IRQ 257 for MSI
bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x0050ef, model 0x000c, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:1d:09:d2:d1:9e
bge0: [MPSAFE]
bge0: [ITHREAD]
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 20 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f80
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 21 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f60
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x6f40
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus6: EHCI version 1.0
usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: domain 0
pcib6: secondary bus 3
pcib6: subordinate bus 4
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xf9a00000-0xf9afffff
pcib6: no prefetched decode
pcib6: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib6
pci3: domain=0, physical bus=3
found-> vendor=0x1217, dev=0x7135, revid=0x21
domain=0, bus=3, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0, size 12, memory disabled
found-> vendor=0x1217, dev=0x00f7, revid=0x02
domain=0, bus=3, slot=1, func=4
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf9aff000, size 12, enabled
pcib6: requested memory range 0xf9aff000-0xf9afffff: good
map[14]: type Memory, range 32, base 0xf9afe800, size 11, enabled
pcib6: requested memory range 0xf9afe800-0xf9afefff: good
pcib6: matched entry for 3.1.INTA
pcib6: slot 1 INTA hardwired to IRQ 19
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
pcib6: cbb0 requested memory range 0x0-0xffffffffffffffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xe0700000
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0700000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib6: matched entry for 3.1.INTA
pcib6: slot 1 INTA hardwired to IRQ 19
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
cbb0: [MPSAFE]
cbb0: [FILTER]
cbb0: Bad Vcc requested
cbb0: PCI Configuration space:
0x00: 0x71351217 0x04100007 0x06070021 0x00824000
0x10: 0xe0700000 0x020000a0 0x20040403 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x04c00113
0x40: 0x01fe1028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00052404 0x00000000 0x00000000 0x00000000
0xa0: 0xfe020001 0x00c04000 0x00000015 0x0000000a
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x09004100 0x80e203ea 0x00000000 0x00400118
0xe0: 0x00820000 0x00000000 0x83000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: vendor=1217, dev=f7
fwohci0: vendor=1217, dev=f7
fwohci0: <1394 Open Host Controller Interface> mem 0xf9aff000-0xf9afffff,0xf9afe800-0xf9afefff irq 19 at device 1.4 on pci3
fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf9aff000
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 31:4f:c0:00:2a:af:68:38
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xd76c0000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:af:68:38
fwe0: bpf attached
fwe0: Ethernet address: 32:4f:c0:af:68:38
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 31:4f:c0:00:2a:af:68:38 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6fa0-0x6faf irq 16 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6fa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x01 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=10 stat1=01 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55
ata0: [MPSAFE]
ata0: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port 0x6eb0-0x6eb7,0x6eb8-0x6ebb,0x6ec0-0x6ec7,0x6ec8-0x6ecb,0x6ee0-0x6eef,0xeff0-0xefff irq 17 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6ee0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 56
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xeff0
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x6eb0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x6eb8
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x6ec0
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x6ec8
ata3: reset tp1 mask=00 ostat0=ff ostat1=ff
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59
uart0: [FILTER]
uart0: fast interrupt
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0xdfe5c4b4 002C8 (v1 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0xdfe5be4a 005E5 (v1 PmRef Cpu0Cst 00003001 INTL 20050624)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (19753, 19490)
est0: Can't check freq 2501, it may be invalid
est0: Invalid id16 (set, cur) = (34835, 1559)
est0: Can't check freq 800, it may be invalid
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0xdfe5c77c 000C4 (v1 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 0xdfe5c42f 00085 (v1 PmRef Cpu1Cst 00003000 INTL 20050624)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (19753, 19490)
est1: Can't check freq 2501, it may be invalid
est1: Invalid id16 (set, cur) = (34835, 1559)
est1: Can't check freq 800, it may be invalid
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcd7ff,0xcd800-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 257745 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99750723 hz
Timecounter "TSC" frequency 2493767975 Hz quality -100
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0xe1 offMax=0x20d
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acpi_acad0: acline initialization startacd0: setting PIO4 on ICH8M chip
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 timesacd0: setting UDMA33 on ICH8M chip
battery0: battery initialization start
battery1: battery initialization start
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
acd0: <Optiarc DVD+/-RW AD-5560A/DD11> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 190782MB <Hitachi HTS722020K9A300 DC4OCA1H> at ata2-master SATA300
ad4: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Sigmatel STAC9205X
hdac0: HDA Codec ID: 0x838476a0
hdac0: Vendor: 0x8384
hdac0: Device: 0x76a0
hdac0: Revision: 0x02
hdac0: Stepping: 0x04
hdac0: PCI Subvendor: 0x01fe1028
hdac0: Found audio FG nid=1 startnode=10 endnode=38 total=28
hdac0:
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0xc0000005 NumGPIO=5 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdac0: nid 10 0x0321101f as 1 seq 15 Headphones Jack jack 1 loc 3 color Black misc 0
hdac0: nid 11 0x0381102e as 2 seq 14 Line-in Jack jack 1 loc 3 color Black misc 0
hdac0: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc 16 color Unknown misc 1
hdac0: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1
hdac0: nid 14 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 15 0x40f000f1 as 15 seq 1 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 20 0x40f000f2 as 15 seq 2 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 22 0x40f000f3 as 15 seq 3 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 23 0x40f000f4 as 15 seq 4 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 24 0x40f000f5 as 15 seq 5 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 33 0x40f000f6 as 15 seq 6 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 34 0x40f000f7 as 15 seq 7 Other None jack 0 loc 0 color Unknown misc 0
hdac0: Patched pins configuration:
hdac0: nid 10 0x0321101f as 1 seq 15 Headphones Jack jack 1 loc 3 color Black misc 0
hdac0: nid 11 0x0381102e as 2 seq 14 Line-in Jack jack 1 loc 3 color Black misc 0
hdac0: nid 12 0x90a70120 as 2 seq 0 Mic Fixed jack 7 loc 16 color Unknown misc 1
hdac0: nid 13 0x90170110 as 1 seq 0 Speaker Fixed jack 7 loc 16 color Unknown misc 1
hdac0: nid 14 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 15 0x40f000f1 as 15 seq 1 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 20 0x40f000f2 as 15 seq 2 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 22 0x40f000f3 as 15 seq 3 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 23 0x40f000f4 as 15 seq 4 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 24 0x40f000f5 as 15 seq 5 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 33 0x40f000f6 as 15 seq 6 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 34 0x40f000f7 as 15 seq 7 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: 2 associations found:
hdac0: Association 0 (1) out:
hdac0: Pin nid=13 seq=0
hdac0: Pin nid=10 seq=15
hdac0: Association 1 (2) in:
hdac0: Pin nid=12 seq=0
hdac0: Pin nid=11 seq=14
hdac0: Tracing association 0 (1)
hdac0: Pin 13 traced to DAC 16
hdac0: Pin 10 traced to DAC 16 and hpredir 0
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0: Pin 12 traced to ADC 18
hdac0: Pin 11 traced to ADC 18
hdac0: Association 1 (2) trace succeeded
hdac0: Tracing input monitor
hdac0: Tracing beeper
hdac0: Enabling headphone/speaker audio routing switching:
hdac0: as=0 sense nid=10 [UNSOL]
hdac0: Pin sense: nid=10 res=0xffffffff
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0:
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0:
hdac0: Default Parameter
hdac0: -----------------
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: IN amp: 0x00050f00
hdac0: OUT amp: 0x80027f7f
hdac0:
hdac0: nid: 10
hdac0: Name: pin: Headphones (Black Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00008000)
hdac0: Pin cap: 0x0000173f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x0321101f
hdac0: Pin control: 0x000000c0 HP OUT
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=16 [audio output] (selected)
hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 11
hdac0: Name: pin: Line-in (Black Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 1 (0x00004000)
hdac0: OSS: line (line)
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x0381102e
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: connections: 2
hdac0: |
hdac0: + [DISABLED] <- nid=16 [audio output] (selected)
hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 12
hdac0: Name: pin: Mic (Fixed)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 1 (0x00000001)
hdac0: OSS: monitor (monitor)
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x90a70120
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 13
hdac0: Name: pin: Speaker (Fixed)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00000001)
hdac0: Pin cap: 0x0000003f
hdac0: ISC TRQD PDC HP OUT IN
hdac0: Pin config: 0x90170110
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=16 [audio output]
hdac0:
hdac0: nid: 14 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x40f000f0
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=16 [audio output]
hdac0:
hdac0: nid: 15 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x40f000f1
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 16
hdac0: Name: audio output
hdac0: Widget cap: 0x000d0c05
hdac0: LRSWAP PWR STEREO
hdac0: Association: 0 (0x00008001)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: Output amp: 0x80027f7f
hdac0: mute=1 step=127 size=2 offset=127
hdac0:
hdac0: nid: 17 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x000d0c05
hdac0: LRSWAP PWR STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: Output amp: 0x80027f7f
hdac0: mute=1 step=127 size=2 offset=127
hdac0:
hdac0: nid: 18
hdac0: Name: audio input
hdac0: Widget cap: 0x001d0541
hdac0: PWR PROC STEREO
hdac0: Association: 1 (0x00004001)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=29 [audio selector]
hdac0:
hdac0: nid: 19 [DISABLED]
hdac0: Name: audio input
hdac0: Widget cap: 0x001d0541
hdac0: PWR PROC STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=30 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 20 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x0040010c
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x40f000f2
hdac0: Pin control: 0x00000000
hdac0: Output amp: 0x80051f1f
hdac0: mute=1 step=31 size=5 offset=31
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=21 [audio mixer] [DISABLED]
hdac0:
hdac0: nid: 21 [DISABLED]
hdac0: Name: audio mixer
hdac0: Widget cap: 0x00200100
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=16 [audio output]
hdac0:
hdac0: nid: 22 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x40f000f3
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 23 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x40f000f4
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 24 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x40f000f5
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 25
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, monitor
hdac0: Output amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0: connections: 7
hdac0: |
hdac0: + [DISABLED] <- nid=14 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=22 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=15 [pin: Other (None)] [DISABLED]
hdac0: + <- nid=11 [pin: Line-in (Black Jack)]
hdac0: + <- nid=12 [pin: Mic (Fixed)] (selected)
hdac0: + [DISABLED] <- nid=13 [pin: Speaker (Fixed)]
hdac0: + [DISABLED] <- nid=10 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 26 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0: connections: 7
hdac0: |
hdac0: + [DISABLED] <- nid=14 [pin: Other (None)] [DISABLED] (selected)
hdac0: + [DISABLED] <- nid=22 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=15 [pin: Other (None)] [DISABLED]
hdac0: + <- nid=11 [pin: Line-in (Black Jack)]
hdac0: + <- nid=12 [pin: Mic (Fixed)]
hdac0: + <- nid=13 [pin: Speaker (Fixed)]
hdac0: + <- nid=10 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 27
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300103
hdac0: STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, monitor
hdac0: Input amp: 0x00050f00
hdac0: mute=0 step=15 size=5 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=25 [audio selector]
hdac0:
hdac0: nid: 28 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300103
hdac0: STEREO
hdac0: Input amp: 0x00050f00
hdac0: mute=0 step=15 size=5 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=26 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 29
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030090d
hdac0: LRSWAP STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, monitor
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 3
hdac0: |
hdac0: + <- nid=27 [audio selector] (selected)
hdac0: + [DISABLED] <- nid=23 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=24 [pin: Other (None)] [DISABLED]
hdac0:
hdac0: nid: 30 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030090d
hdac0: LRSWAP STEREO
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 3
hdac0: |
hdac0: + <- nid=28 [audio selector] [DISABLED] (selected)
hdac0: + [DISABLED] <- nid=23 [pin: Other (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=24 [pin: Other (None)] [DISABLED]
hdac0:
hdac0: nid: 31 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x00040211
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x000e05e0
hdac0: 16 20 24 bits, 44 48 88 96 192 KHz
hdac0:
hdac0: nid: 32 [DISABLED]
hdac0: Name: audio input
hdac0: Widget cap: 0x00140311
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x000e0160
hdac0: 16 20 24 bits, 44 48 96 KHz
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=34 [pin: Other (None)] [DISABLED]
hdac0:
hdac0: nid: 33 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400301
hdac0: DIGITAL STEREO
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x40f000f6
hdac0: Pin control: 0x00000000
hdac0: connections: 3
hdac0: |
hdac0: + <- nid=31 [audio output] [DISABLED] (selected)
hdac0: + <- nid=29 [audio selector]
hdac0: + <- nid=30 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 34 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00430681
hdac0: PWR DIGITAL UNSOL STEREO
hdac0: Pin cap: 0x00010024
hdac0: PDC IN EAPD
hdac0: Pin config: 0x40f000f7
hdac0: Pin control: 0x00000000
hdac0: EAPD: 0x00000002
hdac0:
hdac0: nid: 35
hdac0: Name: beep widget
hdac0: Widget cap: 0x0070000c
hdac0: Association: -2 (0x00000000)
hdac0: OSS: speaker (speaker)
hdac0: Output amp: 0x00170303
hdac0: mute=0 step=3 size=23 offset=3
hdac0:
hdac0: nid: 36 [DISABLED]
hdac0: Name: volume widget
hdac0: Widget cap: 0x00600000
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=16 [audio output] (selected)
hdac0: + <- nid=17 [audio output] [DISABLED]
hdac0:
hdac0: nid: 37 [DISABLED]
hdac0: Name: vendor widget
hdac0: Widget cap: 0x00f00001
hdac0: STEREO
hdac0:
pcm0: <HDA Sigmatel STAC9205X PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz
pcm0: DAC: 16
pcm0:
pcm0: Record:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz
pcm0: ADC: 18
pcm0:
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: nid=10 [pin: Headphones (Black Jack)]
pcm0: |
pcm0: + <- nid=16 [audio output] [src: pcm]
pcm0:
pcm0: nid=13 [pin: Speaker (Fixed)]
pcm0: |
pcm0: + <- nid=16 [audio output] [src: pcm]
pcm0:
pcm0: Record:
pcm0:
pcm0: nid=18 [audio input]
pcm0: |
pcm0: + <- nid=29 [audio selector] [src: line, monitor]
pcm0: |
pcm0: + <- nid=27 [audio selector] [src: line, monitor]
pcm0: |
pcm0: + <- nid=25 [audio selector] [src: line, monitor]
pcm0: |
pcm0: + <- nid=11 [pin: Line-in (Black Jack)] [src: line]
pcm0: + <- nid=12 [pin: Mic (Fixed)] [src: monitor]
pcm0:
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- ctl 1 (nid 16 out): -95/0dB (128 steps) + mute
pcm0:
pcm0: PCM Volume (OSS: pcm)
pcm0: |
pcm0: +- ctl 1 (nid 16 out): -95/0dB (128 steps) + mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker)
pcm0: |
pcm0: +- ctl 10 (nid 35 out): -18/0dB (4 steps)
pcm0:
pcm0: Recording Level (OSS: rec)
pcm0: |
pcm0: +- ctl 4 (nid 25 out): 0/40dB (5 steps)
pcm0: +- ctl 6 (nid 27 in 0): 0/22dB (16 steps)
pcm0: +- ctl 8 (nid 29 out): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "rec":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 33e0000, 4000; 0xffffff8075892000 -> 33e0000
pcm0: sndbuf_setmap 33f0000, 4000; 0xffffff80758a2000 -> 33f0000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 1 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 51
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 52
msi: Assigning MSI IRQ 257 to local APIC 1 vector 53
Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
Root mount waiting for: usbus6 usbus2
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
Root mount waiting for: usbus6
Root mount waiting for: usbus6
Trying to mount root from ufs:/dev/ad4s3a
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0?
ct_to_ts([2009-12-15 02:29:20]) = 1260844160.000000000
start_init: trying /sbin/init
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY asc:3a,0
(probe0:ata0:0:0:0): Medium not present
(probe0:ata0:0:0:0): (probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): NOT READY asc:3a,0
(probe0:ata0:0:0:0): Medium not present
Unretryable error
(probe0:ata0:0:0:0): error 6
(probe0:ata0:0:0:0): Unretryable Error
GEOM: new disk cd0pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <Optiarc DVD+-RW AD-5560A DD11> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-5560A DD11> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
ugen5.2: <vendor 0x0b97> at usbus5
uhub7: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on usbus5
ugen3.2: <Dell> at usbus3
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.06, addr 2> on usbus3
ugen4.2: <Microsoft> at usbus4
ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 2> on usbus4
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums0: 3 buttons and [XYZ] coordinates ID=0
uhub7: 4 ports with 3 removable, self powered
Linux ELF exec handler installed
linprocfs registered
ugen5.3: <O2> at usbus5
bge0: Disabling fastboot
bge0: Disabling fastboot
bge0: link UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
ts_to_ct(1260844173.716578676) = [2009-12-15 02:29:33]
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
More information about the freebsd-stable
mailing list