unsupported NVIDIA SATA controller
joji at eskimo.com
Thu Sep 25 02:03:50 UTC 2008
On Tue, Sep 23, 2008 at 09:11:57AM +0400, Andrey V. Elsukov wrote:
> Joseph Olatt wrote:
> >>> none13 at pci0:0:14:0: class=0x010485 card=0x01371025 chip=0x07f810de rev=0xa2 hdr=0x00
> >>> vendor = 'Nvidia Corp'
> >>> class = mass storage
> >>> subclass = RAID
> >> Do you still have this problem?
> >> It seems that your controller is AHCI-capable.
> >> I can make a patch if is it needed.
> > Yes, I'm still have the above problem. And, yes, the controller appears
> > to be ACHI-capable (at least according to Ubuntu. see )
> > I would greatly appreciate a patch if you can provide one.
> > regards,
> > joseph
> > : http://www.eskimo.com/~joji/nvidia_sata/
> Hi, Joseph.
> Try attached patch.
Sorry I did not get a chance to try your patch earlier. Had to take of
the job that feeds the kids... priorities... ;-)
I just tried the patch and seems like it works wonderfully.
/*** Begin "pciconf -lv" output ***/
atapci1 at pci0:0:14:0: class=0x010485 card=0x01371025 chip=0x07f810de rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
class = mass storage
subclass = RAID
/*** End "pciconf -lv" output ***/
/*** Begin "dmesg" relevant portions ***/
atapci1: <nVidia nForce MCP73 SATA300 controller> port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f mem 0xfea7c000-0xfea7dfff irq 21 at device 14.0 on pci0
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ad4: 238475MB <Seagate ST3250410AS 3.AAF> at ata2-master SATA300
acd0: DVDR <ATAPI DVD A DH16A3S/3A12> at ata4-master SATA150
/*** End "dmesg" relevant portions ***/
I hope your will be included into the STABLE code soon.
Thank you very much for the patch.
P.S. This controller is on an NVIDIA MCP73 motherboard. See
More information about the freebsd-stable