7.0-PRERELEASE Fatal Trap 12 with sysctl and acpi

Fri Feb 15 22:59:03 UTC 2008

Jim Pingle wrote:
> 
> I'm having some trouble with a SuperMicro SuperServer 6022L-6 that 
> previously ran 7.0-BETA4 without problems. Today, I updated this machine 
> to 7.0-PRERELEASE and now it will not fully boot unless I disable ACPI. 
> A quick search of the PR database didn't turn up anything similar with 
> sysctl and ACPI.

[snip]

> When running sysctl -a in single user mode, the last three lines before 
> the crash are (transcribed by hand, no serial console available):
> 
> dev.pcib.3.%location: handle=\_SB_.PCI3
> dev.pcib.3.%pnpinfo: _HID=PNP0A03 UID=3
> dev.pcib.3.%parent: acpi0
> 

With a working system/kernel the lines immediately following this are:

dev.pcib.4.%desc: ACPI Host-PCI bridge
dev.pcib.4.%driver: pcib
dev.pcib.4.%location: handle=\_SB_.PCI4
dev.pcib.4.%pnpinfo: _HID=PNP0A03 _UID=4
dev.pcib.4.%parent: acpi0

> =========================================================================
> Kernel config is GENERIC, with ULE scheduler and "options ASR_COMPAT"
> =========================================================================
Here is the entire kernel config:
ident TEST
include GENERIC
options ASR_COMPAT
nooption SCHED_4BSD
options SCHED_ULE

> =========================================================================
> dmesg is attached, but it is from a non-acpi boot.
> =========================================================================

Attached to this message is a dmesg from a working world/kernel on the same box.

> If I get some time next week I might try a binary search of commits 
> between BETA4 and now, to pinpoint where it stopped working.

As a buildworld/buildkernel takes about an hour and a half on this hardware 
(2x2GHz Xeon), I haven't fully narrowed this down yet. It is somewhere 
between 12/15/2007 (works) and 12/25/2007 (crashes). I glanced at the 
archives between those points but I didn't see any similar complaints. The 
only ACPI references I saw in the archives were referring to thermal zone 
problems, and a commit relating to those.

I'll return to this early next week to see if I can narrow this down more 
precisely.

Jim
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA4 #4: Fri Feb 15 16:23:57 EST 2008
    root at test1.hpcisp.com:/usr/obj/usr/src/sys/TEST
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) XEON(TM) CPU 2.00GHz (1999.94-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
  Logical CPUs per core: 2
real memory  = 2147418112 (2047 MB)
avail memory = 2091872256 (1994 MB)
ACPI APIC Table: <RCC    GCHE    >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ACPI Warning (tbfadt-0505): Optional field "Gpe1Block" has zero address or length:        0       0/8 [20070320]
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <RCC GCHE> on motherboard
ACPI Warning (dswload-0794): Type override - [DEB_] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [MLIB] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [IO__] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [DATA] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [ICNT] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [ACPI] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [IORG] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [SB__] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [SIO_] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [PM__] had invalid type (String) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [BIOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [CMOS] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [KBC_] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
ACPI Warning (dswload-0794): Type override - [OEM_] had invalid type (Integer) for Scope operator, changed to (Scope) [20070320]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
p4tcc3: <CPU Frequency Thermal Control> on cpu3
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xa800-0xa8ff mem 0xfd000000-0xfdffffff,0xfe5ff000-0xfe5fffff irq 18 at device 2.0 on pci0
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xae80-0xaebf mem 0xfe5fc000-0xfe5fcfff,0xfe580000-0xfe59ffff irq 17 at device 4.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:30:48:20:a3:9e
fxp0: [ITHREAD]
fxp1: <Intel 82550 Pro/100 Ethernet> port 0xaf00-0xaf3f mem 0xfe5fd000-0xfe5fdfff,0xfe5a0000-0xfe5bffff irq 19 at device 5.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:30:48:20:a3:9f
fxp1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe5fe000-0xfe5fefff irq 10 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
asr0: <Adaptec Caching SCSI RAID> mem 0xfeb00000-0xfebfffff,0xfb000000-0xfbffffff,0xf8000000-0xf9ffffff irq 29 at device 3.0 on pci4
asr0: [GIANT-LOCKED]
asr0: [ITHREAD]
asr0:   ADAPTEC 2005S FW Rev. 380E, 2 channel, 2000 CCBs, Protocol I2O
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model NetMouse/NetScroll Optical, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <MATSHITA CR-177/7T0D> at ata1-master UDMA33
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-5 380E> Fixed Direct Access SCSI-2 device 
ses0 at asr0 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device 
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/da0s1a