any hope for nfe/msk?

[Pyun YongHyeon]

On Thu, Oct 25, 2007 at 05:30:32PM +0900, To Oleg Lomaka wrote:

[...]

 >  > tdevil% grep -iE "msk|phy" /var/run/dmesg.boot
 >  > pci0: domain=0, physical bus=0
 >  > pci2: domain=0, physical bus=2
 >  > mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> port 0x2000-0x20ff mem 
 >  > 0xd0100000-0xd0103fff irq 16 at device 0.0 on pci2
 >  > mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd0100000
 >  > mskc0: MSI count : 2
 >  > mskc0: RAM buffer size : 16KB
 >  > mskc0: Port 0 : Rx Queue 10KB(0x00000000:0x000027ff)
 >  > mskc0: Port 0 : Tx Queue 10KB(0x00002800:0x00004fff)
 >  > msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x01> on mskc0
 >  > msk0: bpf attached
 >  > msk0: Ethernet address: 00:1b:24:0e:bc:26
 >  > miibus0: <MII bus> on msk0
 >  > e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
 >  > e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 >  > ukphy0: <Generic IEEE 802.3u media interface> PHY 3 on miibus0
 >  > ukphy0: OUI 0x001000, model 0x0004, rev. 0
 >  > ukphy0:  no media present
 >  > ukphy1: <Generic IEEE 802.3u media interface> PHY 6 on miibus0
 >  > ukphy1: OUI 0x004400, model 0x0011, rev. 0
 >  > ukphy1:  no media present
 >  > mskc0: [MPSAFE]
 >  > mskc0: [FILTER]
 >  > pci3: domain=0, physical bus=3
 >  > pci4: domain=0, physical bus=4
 >  > pci5: domain=0, physical bus=5
 >  > pci10: domain=0, physical bus=10
 >  > 
 > 
 > Thanks for the info. Would please try attached patch?
 > 

Any progress here?
I guess it's very important to fix the bug as it would affect all
Yukon FE based NIC.

-- 
Regards,
Pyun YongHyeon