ICH9 support for Motherboard: Foxconn G33M?

Tue Oct 9 11:34:24 PDT 2007

Hello,

This is just a fresh csup buildworld, buildkernel with GENERIC

Motherboard: Foxconn G33M

ata controllers not found so it runs generic @ udma33 slowest possible

here is the  dmesg

server1# cat /var/run/dmesg.boot
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Wed Oct 10 02:08:23 UTC 2007
    root at server1:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (2666.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Stepping = 11
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3fd<SSE3,RSVD2,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2137718784 (2038 MB)
avail memory = 2086768640 (1990 MB)
ACPI APIC Table: <052507 APIC1114>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <052507 RSDT1114> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 2.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port
0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 22 at device 2.0 on pci1
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
re0: Ethernet address: 00:01:6c:18:b9:70
re0: [FAST]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0xd880-0xd887,0xd800-0xd803,0xd480-0xd487,0xd400-0xd403,0xd080-0xd08f,0xd000-0xd00f
irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <GENERIC ATA controller> port
0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f,0xc000-0xc00f
irq 19 at device 31.5 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata2-master UDMA33
ad6: 238475MB <WDC WD2500KS-00MJB0 02.01C03> at ata3-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a

server1# pciconf -lv
hostb0 at pci0:0:0:        class=0x060000 card=0x0ce3105b chip=0x29c08086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = bridge
    subclass   = HOST-PCI
none0 at pci0:2:0: class=0x030000 card=0x0ce3105b chip=0x29c28086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = display
    subclass   = VGA
pcib1 at pci0:30:0:        class=0x060401 card=0x0ce3105b chip=0x244e8086
rev=0x92 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6),
6300ESB Hub Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0 at pci0:31:0:        class=0x060100 card=0x0ce3105b chip=0x29188086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = bridge
    subclass   = PCI-ISA
atapci0 at pci0:31:2:      class=0x01018f card=0x0ce3105b chip=0x29218086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = mass storage
    subclass   = ATA
none1 at pci0:31:3:        class=0x0c0500 card=0x0ce3105b chip=0x29308086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = serial bus
    subclass   = SMBus
atapci1 at pci0:31:5:      class=0x010185 card=0x0ce3105b chip=0x29268086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    class      = mass storage
    subclass   = ATA
re0 at pci1:2:0:   class=0x020000 card=0x0cea105b chip=0x816710ec rev=0x10 hdr=0x00
    vendor     = 'Realtek Semiconductor'
    class      = network
    subclass   = ethernet

Is there anyway to fix it or MFC it from HEAD to STABLE if it works there?

-- 
Regards,

-Abdullah Ibn Hamad Al-Marri
Arab Portal
http://www.WeArab.Net/