6.2 bge regression

[Daniel O'Connor]

I have some Supermicro P8SCT based systems I would like to run 6.2 on,
unfortunately something between 6.1 and 6.2 has broken bge on this board.

This board has 2 bge's and the first one is on before the BIOS hands off to
the OS (I can see the activity light flash) but when the kernel attaches the
light stops flashing. An ifconfig says 'no carrier'.

bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xd1000000-0xd100ffff irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:30:48:89:be:5c
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xd1100000-0xd110ffff irq 17 at device 0.0 on pci4
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:30:48:89:be:5d

From pciconf..
bge0 at pci3:0:0:  class=0x020000 card=0x02c615d9 chip=0x165914e4 rev=0x11 hdr=0x00
bge1 at pci4:0:0:  class=0x020000 card=0x02c615d9 chip=0x165914e4 rev=0x11 hdr=0x00

This system was updated using CVS so it's really 6.2-PRERELEASE, I am about
to try updating again to RELENG_6 and seeing if I was perhaps out of sync.

-- 
Daniel O'Connor software and network engineer
for Genesis Software - http://www.gsoft.com.au
"The nice thing about standards is that there
are so many of them to choose from."
  -- Andrew Tanenbaum
GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20070129/9a0f7f00/attachment.pgp