Gathering entropy freeze on "point-to-point"

Rodney Gordon II meff at
Tue Aug 21 08:43:58 PDT 2007

FreeBSD ghreen.sphere 6.2-STABLE FreeBSD 6.2-STABLE #0: Sun Aug 19
20:10:46 CDT 2007     root at ghreen.sphere:/usr/obj/usr/src/sys/GHREEN

Attached dmesg, attached kernel config.

During bootup about 1 out of 5 times my box freezes right after it
enters userland at the "Gathering entropy:" spot, specifically right
after it says "point-to-point".

Everything is hard locked and I have to reboot with the button in my

-------------- next part --------------
## meff 200708134

# add debugging symbols
makeoptions	DEBUG=-g

# base
machine		i386
cpu		I686_CPU

ident		GHREEN

options		HZ=1000

options		SCHED_ULE



device		pty

device		md

# smp
device          apic
options         SMP
options         IPI_PREEMPTION

# filesystem
options		FFS
options		UFS_DIRHASH
options		MD_ROOT
options		MSDOSFS
options		NTFS
options		CD9660
options		PROCFS
options		PSEUDOFS

# binary compatability
options		COMPAT_43

# sysv compatibility
options		SYSVSHM
options		SYSVMSG
options		SYSVSEM

# busses
device		pci
device		agp

# ports
device		sio

device		ppc
device		ppbus
device		lpt

# usb
device		uhci
device		ehci
device		usb
device		ugen
device		uhid
device		ukbd
#device		ulpt            (hp drivers use ugen)
device		umass
device		ums

# floppy
device		fdc

# ata
device		ata
device		atadisk
device		atapicd
device		atapicam

options		ATA_STATIC_ID

# scsi
device		scbus
device		cd
device		pass

# pwr mgmt, etc
device		acpi

# networking
device		ether
device		loop
device		bpf
device		tap
device		tun
device		if_bridge

device		pf
device		pflog
device		pfsync

device		ppp
options		PPP_BSDCOMP
options		PPP_DEFLATE
options		PPP_FILTER

device		miibus	
device		msk

options		INET
options		INET6

# ipv6
device		gif
device		faith
device		stf

# linux abi emu
options		LINPROCFS
options		LINSYSFS

# keyboard / mouse
device		atkbdc
device		atkbd
device		psm


# video
device		vga
device		splash

device		sc

# sound
device		sound
device		snd_emu10k1

# altq
options		ALTQ
options		ALTQ_CBQ
options		ALTQ_RED
options		ALTQ_HFSC
options		ALTQ_CDNR
options		ALTQ_PRIQ
options		ALTQ_NOPCC

# smbus / i2c
device		smbus
device		smb

device		intpm
device		alpm
device		ichsmb
device		viapm
device		amdpm
device		amdsmb
device		nfpm
device		nfsmb

device		iicbus
device		iicbb

device		ic
device		iic
device		iicsmb

# misc
device		random
device		joy

options		KTRACE
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Sun Aug 19 20:10:46 CDT 2007
    root at ghreen.sphere:/usr/obj/usr/src/sys/GHREEN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3010.67-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf44  Stepping = 4
  AMD Features=0x20100000<NX,LM>
  Cores per package: 2
real memory  = 1610153984 (1535 MB)
avail memory = 1560137728 (1487 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 7900 GS> port 0xe800-0xe87f mem 0xcf000000-0xcfffffff,0xd0000000-0xdfffffff,0xce000000-0xceffffff irq 16 at device 0.0 on pci4
nvidia0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib3
mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xcdefc000-0xcdefffff irq 19 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
msk0: Ethernet address: 00:13:d4:17:ec:35
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1111 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc0: [FAST]
uhci0: <UHCI (generic) USB controller> port 0x8000-0x801f irq 20 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x8400-0x841f irq 17 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x8800-0x881f irq 18 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x9000-0x901f irq 19 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xcdcff800-0xcdcffbff irq 20 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
pcm0: <Creative Audigy 2 (EMU10K2)> port 0xb400-0xb43f irq 22 at device 2.0 on pci1
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci1: <serial bus, FireWire> at device 2.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f mem 0xcdcffc00-0xcdcfffff irq 23 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ichsmb0: <SMBus controller> port 0x400-0x41f irq 23 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub5: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub5: 4 ports with 4 removable, self powered
uhid0: Logitech Logitech Dual Action, rev 1.10/2.00, addr 3, iclass 3/0
ugen0: hp deskjet 5550, rev 2.00/1.00, addr 2
ugen1: American Power Conversion Smart-UPS 750 FW:651.12.D USB FW:4.2, rev 1.10/0.06, addr 3
Timecounters tick every 1.000 msec
acd0: DVDR <LITE-ON DVDRW SOHW-1693S/KS0B> at ata0-master UDMA66
acd1: DVDR <LITE-ON DVDRW LH-20A1P/KL0N> at ata0-slave UDMA66
ad4: 476940MB <WDC WD5000KS-00MNB0 07.02E07> at ata2-master SATA150
ad6: 476940MB <WDC WD5000AAKS-65TMA0 12.01C01> at ata3-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <LITE-ON DVDRW SOHW-1693S KS0B> Removable CD-ROM SCSI-0 device 
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata0 bus 0 target 1 lun 0
cd1: <LITE-ON DVDRW LH-20A1P KL0N> Removable CD-ROM SCSI-0 device 
cd1: 66.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a

More information about the freebsd-stable mailing list