apache problems

Reinhold freebsd at violetlan.net
Thu Aug 16 10:40:27 PDT 2007


I am having some problems with apache22 on my box. What happens is, when
I'm viewing loads and loads of pages, apache will stop responding untill I
restart it again. This normally happens when the free memory shown by top
gets to about +- 100MB.

Here is my dmesg output:
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Thu Aug  2 12:32:26 CEST 2007
    hamba at mbali.violetlan.net:/usr/obj/usr/src/sys/MYKERN
module_register: module accf_data already exists!
Module accf_data failed to register: 17
module_register: module accf_http already exists!
Module accf_http failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual Core AMD Opteron(tm) Processor 165    (1808.34-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x20f32  Stepping = 2

  AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
  AMD Features2=0x3<LAHF,CMP>
  Cores per package: 2
real memory  = 2147418112 (2047 MB)
avail memory = 2065465344 (1969 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
module_register_init: MOD_LOAD (accf_data, 0xffffffff802d0f90,
0xffffffff807120c0) error 17
module_register_init: MOD_LOAD (accf_http, 0xffffffff802d0f90,
0xffffffff80713720) error 17
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff irq 21 at
device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 22
at device 2.1 on pci0
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce CK804 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xcc00-0xcc0f mem
0xfe02b000-0xfe02bfff irq 23 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port
0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xb800-0xb80f mem
0xfe02a000-0xfe02afff irq 21 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xac00-0xacff mem
0xfdfff000-0xfdfff0ff irq 17 at device 7.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0e:2e:08:44:e4
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <display, VGA> at device 0.0 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7
on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 29312MB <Maxtor 33073H3 YAH814Y0> at ata0-master UDMA100
acd0: CDRW <CR-48XATE/1.0G> at ata1-master UDMA33
acd1: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0122/E1.22> at ata1-slave
ad4: 238475MB <Seagate ST3250820AS 3.AAE> at ata2-master SATA150
ad6: 238475MB <Seagate ST3250410AS 3.AAA> at ata3-master SATA150
ad8: 76324MB <WDC WD800JD-08MSA1 10.01E01> at ata4-master SATA150
SMP: AP CPU #1 Launched!

I'm also getting this error when I do a gracful restart of apache
[Thu Aug 16 05:12:16 2007] [warn] (22)Invalid argument: Failed to enable
the 'httpready' Accept Filter
[Thu Aug 16 05:12:16 2007] [warn] (22)Invalid argument: Failed to enable
the 'httpready' Accept Filter

and in my /boot/loader.conf I have added

and kldstat reports this
Id Refs Address            Size     Name
 1    3 0xffffffff80100000 611660   kernel
 2    1 0xffffffff80712000 718      accf_data.ko
 3    1 0xffffffff80713000 1408     accf_http.ko

When I do a proper restart I'm also getting these errors
[Thu Aug 16 05:10:56 2007] [warn] child process 84880 still did not exit,
sending a SIGTERM
[Thu Aug 16 05:10:58 2007] [warn] child process 84880 still did not exit,
sending a SIGTERM
[Thu Aug 16 05:11:00 2007] [warn] child process 84880 still did not exit,
sending a SIGTERM
[Thu Aug 16 05:11:02 2007] [error] child process 84880 still did not exit,
sending a SIGKILL

In my custom kernel I have added or changed the following
options     SCHED_ULE

options SMP

device mptable

# Enable PF
device pf
device pflog
device pfsync

options ALTQ
options ALTQ_CBQ
options ALTQ_RED
options ALTQ_RIO
options ALTQ_HFSC
options ALTQ_PRIQ
options ALTQ_NOPCC

if any other info is needed, please let me know
Please help me to fix this problem


More information about the freebsd-stable mailing list