cant start 18, 21-24 hdd drives on 6.2-PRERELEASE/amd64. pls pls help

Wed Sep 27 17:51:24 PDT 2006

I have nForce3 motherboard and Athlon 64
Here is /var/log/messages

Sep 28 03:41:03 ddf syslogd: kernel boot file is /boot/kernel/kernel
Sep 28 03:41:03 ddf kernel: Copyright (c) 1992-2006 The FreeBSD Project.
Sep 28 03:41:03 ddf kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988,
1989, 1991, 1992, 1993, 1994
Sep 28 03:41:03 ddf kernel: The Regents of the University of California. All
rights reserved.
Sep 28 03:41:03 ddf kernel: FreeBSD 6.2-PRERELEASE #4: Sun Sep 24 07:08:40
MSD 2006
Sep 28 03:41:03 ddf kernel: kamuzon at ddf.yasnet.ru:/usr/obj/usr/src/sys/KMD
Sep 28 03:41:03 ddf kernel: Timecounter "i8254" frequency 1193182 Hz quality
0
Sep 28 03:41:03 ddf kernel: CPU: AMD Athlon(tm) 64 Processor 2800+ (
1808.26-MHz K8-class CPU)
Sep 28 03:41:03 ddf kernel: Origin = "AuthenticAMD"  Id = 0xfc0  Stepping =
0
Sep 28 03:41:03 ddf kernel:
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Sep 28 03:41:03 ddf kernel: AMD
Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
Sep 28 03:41:03 ddf kernel: real memory  = 536805376 (511 MB)
Sep 28 03:41:03 ddf kernel: avail memory = 505585664 (482 MB)
Sep 28 03:41:03 ddf kernel: ACPI APIC Table: <Nvidia AWRDACPI>
Sep 28 03:41:03 ddf kernel: ioapic0 <Version 1.1> irqs 0-23 on motherboard
Sep 28 03:41:03 ddf kernel: kbd1 at kbdmux0
Sep 28 03:41:03 ddf kernel: ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212,
RF5111, RF5112, RF2413, RF5413)
Sep 28 03:41:03 ddf kernel: acpi0: <Nvidia AWRDACPI> on motherboard
Sep 28 03:41:03 ddf kernel: acpi0: Power Button (fixed)
Sep 28 03:41:03 ddf kernel: Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
Sep 28 03:41:03 ddf kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port
0x4008-0x400b on acpi0
Sep 28 03:41:03 ddf kernel: cpu0: <ACPI CPU> on acpi0
Sep 28 03:41:03 ddf kernel: acpi_button0: <Power Button> on acpi0
Sep 28 03:41:03 ddf kernel: pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff,0xcf0-0xcf3 on acpi0
Sep 28 03:41:03 ddf kernel: pci0: <ACPI PCI bus> on pcib0
Sep 28 03:41:03 ddf kernel: agp0: <NVIDIA nForce3-250 AGP Controller> mem
0xd0000000-0xd7ffffff at device 0.0 on pci0
Sep 28 03:41:03 ddf kernel: isab0: <PCI-ISA bridge> at device 1.0 on pci0
Sep 28 03:41:03 ddf kernel: isa0: <ISA bus> on isab0
Sep 28 03:41:03 ddf kernel: pci0: <serial bus, SMBus> at device 1.1 (no
driver attached)
Sep 28 03:41:03 ddf kernel: nve0: <NVIDIA nForce MCP7 Networking Adapter>
port 0xc400-0xc407 mem 0xe0000000-0xe0000fff irq 20 at device 5.0 on pci0
Sep 28 03:41:03 ddf kernel: nve0: Ethernet address 00:04:61:71:8c:c1
Sep 28 03:41:03 ddf kernel: miibus0: <MII bus> on nve0
Sep 28 03:41:03 ddf kernel: ciphy0: <Cicada CS8201 10/100/1000TX PHY> on
miibus0
Sep 28 03:41:03 ddf kernel: ciphy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Sep 28 03:41:03 ddf kernel: nve0: Ethernet address: 00:04:61:71:8c:c1
Sep 28 03:41:03 ddf kernel: atapci0: <nVidia nForce3 Pro UDMA133 controller>
port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
Sep 28 03:41:03 ddf kernel: ata0: <ATA channel 0> on atapci0
Sep 28 03:41:03 ddf kernel: ata1: <ATA channel 1> on atapci0
Sep 28 03:41:03 ddf kernel: atapci1: <nVidia nForce3 Pro SATA150 controller>
port
0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f,0xe400-0xe47f
irq 21 at device 10.0 on pci0
Sep 28 03:41:03 ddf kernel: ata2: <ATA channel 0> on atapci1
Sep 28 03:41:03 ddf kernel: ata3: <ATA channel 1> on atapci1
Sep 28 03:41:03 ddf kernel: pcib1: <ACPI PCI-PCI bridge> at device 11.0 on
pci0
Sep 28 03:41:03 ddf kernel: pci1: <ACPI PCI bus> on pcib1
Sep 28 03:41:03 ddf kernel: pci1: <display, VGA> at device 0.0 (no driver
attached)
Sep 28 03:41:03 ddf kernel: pcib2: <ACPI PCI-PCI bridge> at device 14.0 on
pci0
Sep 28 03:41:03 ddf kernel: pci2: <ACPI PCI bus> on pcib2
Sep 28 03:41:03 ddf kernel: atapci2: <Promise PDC20269 UDMA133 controller>
port 0x6000-0x6007,0x6400-0x6403,0x6800-0x6807,0x6c00-0x6c03,0x7000-0x700f
mem 0xdf040000-0xdf043fff irq 19 at device 7.0 on pci2
Sep 28 03:41:03 ddf kernel: ata4: <ATA channel 0> on atapci2
Sep 28 03:41:03 ddf kernel: ata5: <ATA channel 1> on atapci2
Sep 28 03:41:03 ddf kernel: atapci3: <Promise PDC20318 SATA150 controller>
port 0x7400-0x743f,0x7800-0x780f,0x7c00-0x7c7f mem
0xdf045000-0xdf045fff,0xdf000000-0xdf01ffff irq 16 at device 8.0 on pci2
Sep 28 03:41:03 ddf kernel: ata6: <ATA channel 0> on atapci3
Sep 28 03:41:03 ddf kernel: ata7: <ATA channel 1> on atapci3
Sep 28 03:41:03 ddf kernel: ata8: <ATA channel 2> on atapci3
Sep 28 03:41:03 ddf kernel: ata9: <ATA channel 3> on atapci3
Sep 28 03:41:03 ddf kernel: atapci4: <Promise PDC20375 SATA150 controller>
port 0x8000-0x803f,0x8400-0x840f,0x8800-0x887f mem
0xdf044000-0xdf044fff,0xdf020000-0xdf03ffff irq 17 at device 9.0 on pci2
Sep 28 03:41:03 ddf kernel: ata10: <ATA channel 0> on atapci4
Sep 28 03:41:03 ddf kernel: ata11: <ATA channel 1> on atapci4
Sep 28 03:41:03 ddf kernel: ata12: <ATA channel 2> on atapci4
Sep 28 03:41:03 ddf kernel: atapci5: <AcerLabs M5281 SATA150 controller>
port 0x8c00-0x8c07,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0x9c00-0x9c0f
irq 19 at device 11.0 on pci2
Sep 28 03:41:03 ddf kernel: ata13: <ATA channel 0> on atapci5
Sep 28 03:41:03 ddf kernel: ata14: <ATA channel 1> on atapci5
Sep 28 03:41:03 ddf kernel: pci2: <mass storage> at device 11.1 (no driver
attached)
Sep 28 03:41:03 ddf kernel: acpi_tz0: <Thermal Zone> on acpi0
Sep 28 03:41:03 ddf kernel: atkbdc0: <Keyboard controller (i8042)> port
0x60,0x64 irq 1 on acpi0
Sep 28 03:41:03 ddf kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Sep 28 03:41:03 ddf kernel: kbd0 at atkbd0
Sep 28 03:41:03 ddf kernel: atkbd0: [GIANT-LOCKED]
Sep 28 03:41:03 ddf kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Sep 28 03:41:03 ddf kernel: psm0: [GIANT-LOCKED]
Sep 28 03:41:03 ddf kernel: psm0: model NetMouse/NetScroll Optical, device
ID 0
Sep 28 03:41:03 ddf kernel: orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xca7ff on isa0
Sep 28 03:41:03 ddf kernel: ppc0: cannot reserve I/O port range
Sep 28 03:41:03 ddf kernel: sc0: <System console> at flags 0x100 on isa0
Sep 28 03:41:03 ddf kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Sep 28 03:41:03 ddf kernel: sio0: configured irq 4 not in bitmap of probed
irqs 0
Sep 28 03:41:03 ddf kernel: sio0: port may not be enabled
Sep 28 03:41:03 ddf kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on
isa0
Sep 28 03:41:03 ddf kernel: sio0: type 8250 or not responding
Sep 28 03:41:03 ddf kernel: sio1: configured irq 3 not in bitmap of probed
irqs 0
Sep 28 03:41:03 ddf kernel: sio1: port may not be enabled
Sep 28 03:41:03 ddf kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df
iomem 0xa0000-0xbffff on isa0
Sep 28 03:41:03 ddf kernel: Timecounter "TSC" frequency 1808256999 Hz
quality 800
Sep 28 03:41:03 ddf kernel: Timecounters tick every 1.000 msec
Sep 28 03:41:03 ddf kernel: IP Filter: v4.1.13 initialized.  Default = pass
all, Logging = disabled
Sep 28 03:41:03 ddf kernel: ipfw2 (+ipv6) initialized, divert loadable,
rule-based forwarding enabled, default to deny, logging unlimited
Sep 28 03:41:03 ddf kernel: ad0: 190782MB <Seagate ST3200822A 3.01> at
ata0-master UDMA100
Sep 28 03:41:03 ddf kernel: ad1: 238475MB <Seagate ST3250823A 3.01> at
ata0-slave UDMA100
Sep 28 03:41:03 ddf kernel: ad2: 238475MB <Seagate ST3250823A 3.01> at
ata1-master UDMA100
Sep 28 03:41:03 ddf kernel: ad3: 238475MB <Seagate ST3250823A 3.01> at
ata1-slave UDMA100
Sep 28 03:41:03 ddf kernel: ad4: 238475MB <Seagate ST3250823AS 3.04> at
ata2-master SATA150
Sep 28 03:41:03 ddf kernel: ad6: 238475MB <Seagate ST3250823AS 3.04> at
ata3-master SATA150
Sep 28 03:41:03 ddf kernel: ad8: 381554MB <Seagate ST3400633A 3.AAD> at
ata4-master UDMA100
Sep 28 03:41:03 ddf kernel: ad9: 381554MB <Seagate ST3400633A 3.AAD> at
ata4-slave UDMA100
Sep 28 03:41:03 ddf kernel: ad10: 381554MB <Seagate ST3400633A 3.AAD> at
ata5-master UDMA100
Sep 28 03:41:03 ddf kernel: ad11: 381554MB <Seagate ST3400633A 3.AAD> at
ata5-slave UDMA100
Sep 28 03:41:03 ddf kernel: ad12: 238475MB <Seagate ST3250823AS 3.02> at
ata6-master SATA150
Sep 28 03:41:03 ddf kernel: ad14: 238475MB <Seagate ST3250823AS 3.01> at
ata7-master SATA150
Sep 28 03:41:03 ddf kernel: ad16: 238475MB <Seagate ST3250823AS 3.01> at
ata8-master SATA150
Sep 28 03:41:03 ddf kernel: ad18: 238475MB <Seagate ST3250823AS 3.02> at
ata9-master SATA150
Sep 28 03:41:03 ddf kernel: ad20: 238475MB <Seagate ST3250823AS 3.04> at
ata10-master SATA150
Sep 28 03:41:03 ddf kernel: ad22: 238475MB <Seagate ST3250823AS 3.04> at
ata11-master SATA150
Sep 28 03:41:03 ddf kernel: ad24: 305245MB <Seagate ST3320620A 3.AAC> at
ata12-master UDMA100
Sep 28 03:41:03 ddf kernel: ad25: 305245MB <Seagate ST3320620A 3.AAC> at
ata12-slave UDMA100
====
BTW. ad25 is 18th hdd in subj. It didnt want to start at first time. FreeBSD
just didnt see the drive.
I turn off 4 hdds from "Promise PDC20269 UDMA133 controller" for release
UDMA100 "slot" (I thought, maybe UDMA100 couldnt connect more then X hdds).
And after next boot system crashes with fatal errors (page fault... - didnt
see all info) and went itself to reboot. I turn on 4 hdds to "Promise
PDC20269 UDMA133 controller" and try to boot. System started and from that
time I see ad25. Now it works for a few hours.
====
Sep 28 03:41:03 ddf kernel: ad26: 305245MB <Seagate ST3320620AS 3.AAC> at
ata13-master SATA150
Sep 28 03:41:03 ddf kernel: ad28: 305245MB <Seagate ST3320620AS 3.AAC> at
ata14-master SATA150
Sep 28 03:41:03 ddf kernel: Trying to mount root from ufs:/dev/ad0s1a
====

Now about 21-24 hdds. (4 x 305245MB <Seagate ST3320620A 3.AAC> UDMA100.
Total 6. At now FreeBSD find only 2.)
Its connect to
===
Sep 28 03:41:03 ddf kernel: atapci5: <AcerLabs M5281 SATA150 controller>
port 0x8c00-0x8c07,0x9000-0x9003,0x9400-0x9407,0x9800-0x9803,0x9c00-0x9c0f
irq 19 at device 11.0 on pci2
Sep 28 03:41:03 ddf kernel: ata13: <ATA channel 0> on atapci5
Sep 28 03:41:03 ddf kernel: ata14: <ATA channel 1> on atapci5
Sep 28 03:41:03 ddf kernel: pci2: <mass storage> at device 11.1 (no driver
attached)
===
I think to pci2 at device 11.1
But why "(no driver attached)"?

BTW
"Promise PDC20269 UDMA133 controller" is controller with 2 PATA channels
"Promise PDC20318 SATA150 controller" 4 SATA channels
"Promise PDC20375 SATA150 controller" 2 SATA channels and 1 PATA channel
and
"AcerLabs M5281 SATA150 controller" is controller with 2 SATA channels and 2
PATA channels. Total 6 hdds.
FreeBSD doesnt see PATA hdds.
Here is photo of device http://www.espada-tech.ru/img/24597-1.jpg
Device names ESPADA ALI5281
ALI5281 is in supported by 6.1-RELEASE ATA/SATA hardware list (ALI: M5229,
M5281, M5287, M5289.)

What should I do to start PATA hdd drives at device 11.1 on AcerLabs M5281?

PS I didnt disable anithing in DEFAULT kernel. Only add IPFW, DUMMY and IPF.

Please help.