missed hostapd / ath MFC warning?

[Volker]

Hi folks,

I've recently (september 3rd) csup'ed RELENG_6 and made a
buildkernel && buildworld process.

After the reboot hostapd doesn't work as expected. Did I miss a MFC
warning for ath / hostapd?

hostapd just says:
bellona# hostapd -dd /etc/hostapd.conf
Configuration file: /etc/hostapd.conf
bsd_set_iface_flags: dev_up=0
bsd_get_ssid: ssid="vtec"
Using interface ath0 with hwaddr 00:09:5b:89:7d:1f and ssid 'vtec'
bsd_set_ieee8021x: enabled=1
bsd_configure_wpa: group key cipher=TKIP (1)
bsd_configure_wpa: pairwise key ciphers=0x2
bsd_configure_wpa: key management algorithms=0x2
bsd_configure_wpa: rsn capabilities=0x0
bsd_configure_wpa: enable WPA= 0x1
bsd_set_iface_flags: dev_up=1
bsd_set_privacy: enabled=1
WPA: group state machine entering state GTK_INIT
GMK - hexdump(len=32): 33 e9 d7 a0 86 d2 4f 23 5b a8 21 f7 ed ef cf
57 ae 2b 29 5e 8e 5e 91 a8 92 9b 0b dd fa 10 28 ac
GTK - hexdump(len=32): 8e 9c 18 a4 59 ca 79 bc 04 01 9f e2 82 a5 5b
17 94 d7 fd e8 e2 7e 65 30 bf de 9b 5f 9b 72 b3 f5
WPA: group state machine entering state SETKEYSDONE
bsd_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1
Flushing old station entries
bsd_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3
Deauthenticate all stations

.....and all looks fine.

ifconfig ath0 says:
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2290
        ether 00:09:5b:89:7d:1f
        media: IEEE 802.11 Wireless Ethernet autoselect
        status: no carrier
        ssid vtec channel 9
        authmode WPA privacy MIXED deftxkey 2 TKIP 2:128-bit TKIP
3:128-bit
        txpowmax 30 bmiss 7 protmode CTS burst bintval 100

I just get a 'no carrier' and so no client system is able to see the
AP. There's no configuration change just a recently csup'ed and
rebuild system.

Is there something I've overseen?

Greetings,

Volker