freebsd panic on HP Proliant DL360
Ernest Natiello
enatiello at broadviewnet.net
Wed Oct 11 19:44:59 UTC 2006
Hello,
I have 4 HP Proliant DL360's (1u) which panic/reboot often (minimum
1x month), but in a seemingly inconsistent manner. As per other
suggestions, ipf was replaced with pf, an Intel pro 100 was added, the
BGE device was disabled in the BIOS and the BGE driver was removed from
the kernel. Also, Lights Out Management was disabled.
None of the suggestions have cleared up the issue, so the BGE
driver was added back to the kernel after reading the most recent
developments in the posting:
http://www.freebsd.org/cgi/query-pr.cgi?pr=96806 however the BGE device
still remains disabled in the BIOS.
One of the 4 servers is running: FreeBSD unix35 6.2-PRERELEASE FreeBSD
6.2-PRERELEASE #3: Wed Oct 4 11:11:37 EDT 2006
The other three are: FreeBSD unix34 6.1-STABLE FreeBSD 6.1-STABLE #0:
Fri Jun 30 09:44:43 EDT 2006
They are running a custom kernel, adding SMP, pf and ALTQ options. INET6
was removed.
I have added a dmesg, kernel config and "kgdb where" below. Any help
would be appreciated.
TIA,
Ernest
-----begin dmesg-----
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #3: Wed Oct 4 11:11:37 EDT 2006
root at unix35:/usr/obj/usr/src/sys/UNIX35
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.22-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
Logical CPUs per core: 2
real memory = 2147459072 (2047 MB)
avail memory = 2096345088 (1999 MB)
ACPI APIC Table: <COMPAQ 00000083>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic3 <Version 1.1> irqs 48-63 on motherboard
acpi0: <COMPAQ P31> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 3.0 (no driver attached)
ciss0: <Compaq Smart Array 5i> port 0x2800-0x28ff mem
0xf5f80000-0xf5fbffff,0xf5df0000-0xf5df3fff irq 31 at device 4.0 on pci0
ciss0: [GIANT-LOCKED]
pci0: <base peripheral> at device 5.0 (no driver attached)
pci0: <base peripheral> at device 5.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xf5e70000-0xf5e70fff irq 10
at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 1.0 on pci1
pci2: <PCI bus> on pcib2
fxp0: <Intel 82551 Pro/100 Ethernet> port 0x3000-0x303f mem
0xf7ff0000-0xf7ff0fff,0xf7fc0000-0xf7fdffff irq 28 at device 12.0 on
pci2
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:90:fb:01:f3:34
fxp1: <Intel 82551 Pro/100 Ethernet> port 0x3040-0x307f mem
0xf7fb0000-0xf7fb0fff,0xf7f80000-0xf7f9ffff irq 27 at device 13.0 on
pci2
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:90:fb:01:f3:35
pcib3: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib3
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 1.000 msec
acd0: DVDROM <DV-28E-C/B.4F> at ata0-master PIO4
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 34727MB (71122560 512 byte sectors: 255H 32S/T 8716C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /usr/local was not properly dismounted
-----end dmesg-----
-----begin kernel config-----
machine i386
cpu I686_CPU
ident UNIX35
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for
devices.
options SMP
makeoptions DEBUG=-g # Build kernel with gdb(1) debug
symbols#options SCHED_ULE # ULE scheduler
options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread
preemption
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates
support
options UFS_ACL # Support for access control
lists
options UFS_DIRHASH # Improve performance on big
directoriesoptions MD_ROOT # MD is a potential
root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires
NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires
PSEUDOFS)options PSEUDOFS # Pseudo-filesystem
framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP
THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
options SCSI_DELAY=5000 # Delay (in ms) before probing
SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in
debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in
debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.
device apic # I/O APIC
###### additional stuff
device pf
device pflog
device pfsync
options ALTQ
options ALTQ_CBQ # Class Bases Queuing (CBQ)
options ALTQ_RED # Random Early Detection (RED)
options ALTQ_RIO # RED In/Out
options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC)
options ALTQ_PRIQ # Priority Queuing (PRIQ)
options ALTQ_NOPCC # Required for SMP build
#################
# Bus support.
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx
devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a
module
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets +
those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters,
AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI
adapters
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI
access)
device ses # SCSI Environmental Services (and
SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device arcmsr # Areca SATA II RAID
device asr # DPT SmartRAID V, VI and Adaptec SCSI
RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for
optionsdevice hptmv # Highpoint RocketRAID 182x
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires
CAM)
device ida # Compaq Smart RAID
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit
Ethernet Card
device ixgb # Intel PRO/10GbE Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these
NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557,
82558)
device lge # Level 1 LXT1001 gigabit Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
device nve # nVidia nForce MCP on-board Ethernet
Networkingdevice pcn # AMD Am79C97x PCI
10/100(precedence over 'lnc')device re # RealTek
8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS
7016
device sk # SysKonnect SK-984x & SK-982x gigabit
Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device ti # Alteon Networks Tigon I/II gigabit
Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'',
``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390
cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10
etc.
device lnc # NE2100, NE32-VL Lance Ethernet cards
device sn # SMC's 9000 series of Ethernet chips
device xe # Xircom pccard Ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless
NICs.
device awi # BayStack 660 and others
device ral # Ralink Technology RT2500 wireless
NICs.
device wi # WaveLAN/Intersil/Symbol 802.11
wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus
and da
device ums # Mouse
device ural # Ralink Technology RT2500USB wireless
NICs
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires miibus
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and
da)
device fwe # Ethernet over FireWire (non-standard!)
-----end kernel config-----
-----begin crash dump-----
(kgdb) where
#0 doadump () at pcpu.h:165
#1 0xc0682aaa in boot (howto=260)
at /usr/src/sys/kern/kern_shutdown.c:409
#2 0xc0682dd1 in panic (fmt=0xc088273f "%s")
at /usr/src/sys/kern/kern_shutdown.c:565
#3 0xc0837de0 in trap_fatal (frame=0xe9226ab0, eva=260)
at /usr/src/sys/i386/i386/trap.c:837
#4 0xc0837596 in trap (frame=
{tf_fs = -858718200, tf_es = 463994920, tf_ds = -383647704, tf_edi
= -952443520, tf_esi = 4, tf_ebp = -383620356, tf_isp = -383620388,
tf_ebx = -927947756, tf_edx = 6, tf_ecx = 0, tf_eax = 1, tf_trapno = 12,
tf_err = 0, tf_eip = -1066951471, tf_cs = 32, tf_eflags = 65538, tf_esp
= -383619952, tf_ss = -927947900}) at /usr/src/sys/i386/i386/trap.c:270
#5 0xc08242ea in calltrap () at /usr/src/sys/i386/i386/exception.s:139
#6 0xc0679cd1 in _mtx_lock_sleep (m=0xc8b0a414, tid=3342523776, opts=0,
file=0x0, line=0) at /usr/src/sys/kern/kern_mutex.c:546
#7 0xc072191d in ip_ctloutput (so=0x1, sopt=0xe9226c90)
at /usr/src/sys/netinet/ip_output.c:1184
#8 0xc072fe07 in tcp_ctloutput (so=0xc797b858, sopt=0xe9226c90)
at /usr/src/sys/netinet/tcp_usrreq.c:1038
#9 0xc06bea50 in sosetopt (so=0xc797b858, sopt=0xe9226c90)
at /usr/src/sys/kern/uipc_socket.c:1563
#10 0xc06c3dc5 in kern_setsockopt (td=0xc73add80, s=0, level=1, name=1,
val=0x0, valseg=UIO_USERSPACE, valsize=6)
at /usr/src/sys/kern/uipc_syscalls.c:1351
#11 0xc06c3ce6 in setsockopt (td=0xc73add80, uap=0x1)
at /usr/src/sys/kern/uipc_syscalls.c:1307
#12 0xc0838127 in syscall (frame=
{tf_fs = -65477, tf_es = 65595, tf_ds = -1078001605, tf_edi = 1,
tf_esi = 0, tf_ebp = -1077941176, tf_isp = -383619740, tf_ebx = 0,
tf_edx = 0, tf_ecx = 0, tf_eax = 105, tf_trapno = 12, tf_err = 2, tf_eip
= 672093283, tf_cs = 51, tf_eflags = 642, tf_esp = -1077941220, tf_ss =
59})
at /usr/src/sys/i386/i386/trap.c:983
#13 0xc082433f in Xint0x80_syscall ()
at /usr/src/sys/i386/i386/exception.s:200
#14 0x00000033 in ?? ()
Previous frame inner to this frame (corrupt stack?)
(kgdb)
#0 doadump () at pcpu.h:165
#1 0xc0682aaa in boot (howto=260)
at /usr/src/sys/kern/kern_shutdown.c:409
#2 0xc0682dd1 in panic (fmt=0xc088273f "%s")
at /usr/src/sys/kern/kern_shutdown.c:565
#3 0xc0837de0 in trap_fatal (frame=0xe9226ab0, eva=260)
at /usr/src/sys/i386/i386/trap.c:837
#4 0xc0837596 in trap (frame=
{tf_fs = -858718200, tf_es = 463994920, tf_ds = -383647704, tf_edi
= -952443520, tf_esi = 4, tf_ebp = -383620356, tf_isp = -383620388,
tf_ebx = -927947756, tf_edx = 6, tf_ecx = 0, tf_eax = 1, tf_trapno = 12,
tf_err = 0, tf_eip = -1066951471, tf_cs = 32, tf_eflags = 65538, tf_esp
= -383619952, tf_ss = -927947900}) at /usr/src/sys/i386/i386/trap.c:270
#5 0xc08242ea in calltrap () at /usr/src/sys/i386/i386/exception.s:139
#6 0xc0679cd1 in _mtx_lock_sleep (m=0xc8b0a414, tid=3342523776, opts=0,
file=0x0, line=0) at /usr/src/sys/kern/kern_mutex.c:546
#7 0xc072191d in ip_ctloutput (so=0x1, sopt=0xe9226c90)
at /usr/src/sys/netinet/ip_output.c:1184
#8 0xc072fe07 in tcp_ctloutput (so=0xc797b858, sopt=0xe9226c90)
at /usr/src/sys/netinet/tcp_usrreq.c:1038
#9 0xc06bea50 in sosetopt (so=0xc797b858, sopt=0xe9226c90)
at /usr/src/sys/kern/uipc_socket.c:1563
#10 0xc06c3dc5 in kern_setsockopt (td=0xc73add80, s=0, level=1, name=1,
val=0x0, valseg=UIO_USERSPACE, valsize=6)
at /usr/src/sys/kern/uipc_syscalls.c:1351
#11 0xc06c3ce6 in setsockopt (td=0xc73add80, uap=0x1)
at /usr/src/sys/kern/uipc_syscalls.c:1307
#12 0xc0838127 in syscall (frame=
{tf_fs = -65477, tf_es = 65595, tf_ds = -1078001605, tf_edi = 1,
tf_esi = 0, tf_ebp = -1077941176, tf_isp = -383619740, tf_ebx = 0,
tf_edx = 0, tf_ecx = 0, tf_eax = 105, tf_trapno = 12, tf_err = 2, tf_eip
= 672093283, tf_cs = 51, tf_eflags = 642, tf_esp = -1077941220, tf_ss =
59})
at /usr/src/sys/i386/i386/trap.c:983
#13 0xc082433f in Xint0x80_syscall ()
at /usr/src/sys/i386/i386/exception.s:200
#14 0x00000033 in ?? ()
(kgdb)
#0 doadump () at pcpu.h:165
#1 0xc0682aaa in boot (howto=260)
at /usr/src/sys/kern/kern_shutdown.c:409
#2 0xc0682dd1 in panic (fmt=0xc088273f "%s")
at /usr/src/sys/kern/kern_shutdown.c:565
#3 0xc0837de0 in trap_fatal (frame=0xe9226ab0, eva=260)
at /usr/src/sys/i386/i386/trap.c:837
#4 0xc0837596 in trap (frame=
{tf_fs = -858718200, tf_es = 463994920, tf_ds = -383647704, tf_edi
= -952443520, tf_esi = 4, tf_ebp = -383620356, tf_isp = -383620388,
tf_ebx = -927947756, tf_edx = 6, tf_ecx = 0, tf_eax = 1, tf_trapno = 12,
tf_err = 0, tf_eip = -1066951471, tf_cs = 32, tf_eflags = 65538, tf_esp
= -383619952, tf_ss = -927947900}) at /usr/src/sys/i386/i386/trap.c:270
#5 0xc08242ea in calltrap () at /usr/src/sys/i386/i386/exception.s:139
#6 0xc0679cd1 in _mtx_lock_sleep (m=0xc8b0a414, tid=3342523776, opts=0,
file=0x0, line=0) at /usr/src/sys/kern/kern_mutex.c:546
#7 0xc072191d in ip_ctloutput (so=0x1, sopt=0xe9226c90)
at /usr/src/sys/netinet/ip_output.c:1184
#8 0xc072fe07 in tcp_ctloutput (so=0xc797b858, sopt=0xe9226c90)
at /usr/src/sys/netinet/tcp_usrreq.c:1038
#9 0xc06bea50 in sosetopt (so=0xc797b858, sopt=0xe9226c90)
at /usr/src/sys/kern/uipc_socket.c:1563
#10 0xc06c3dc5 in kern_setsockopt (td=0xc73add80, s=0, level=1, name=1,
val=0x0, valseg=UIO_USERSPACE, valsize=6)
at /usr/src/sys/kern/uipc_syscalls.c:1351
#11 0xc06c3ce6 in setsockopt (td=0xc73add80, uap=0x1)
at /usr/src/sys/kern/uipc_syscalls.c:1307
#12 0xc0838127 in syscall (frame=
{tf_fs = -65477, tf_es = 65595, tf_ds = -1078001605, tf_edi = 1,
tf_esi = 0, tf_ebp = -1077941176, tf_isp = -383619740, tf_ebx = 0,
tf_edx = 0, tf_ecx = 0, tf_eax = 105, tf_trapno = 12, tf_err = 2, tf_eip
= 672093283, tf_cs = 51, tf_eflags = 642, tf_esp = -1077941220, tf_ss =
59})
at /usr/src/sys/i386/i386/trap.c:983
#13 0xc082433f in Xint0x80_syscall ()
at /usr/src/sys/i386/i386/exception.s:200
#14 0x00000033 in ?? ()
(kgdb)
#0 doadump () at pcpu.h:165
#1 0xc0682aaa in boot (howto=260)
at /usr/src/sys/kern/kern_shutdown.c:409
#2 0xc0682dd1 in panic (fmt=0xc088273f "%s")
at /usr/src/sys/kern/kern_shutdown.c:565
#3 0xc0837de0 in trap_fatal (frame=0xe9226ab0, eva=260)
at /usr/src/sys/i386/i386/trap.c:837
#4 0xc0837596 in trap (frame=
{tf_fs = -858718200, tf_es = 463994920, tf_ds = -383647704, tf_edi
= -952443520, tf_esi = 4, tf_ebp = -383620356, tf_isp = -383620388,
tf_ebx = -927947756, tf_edx = 6, tf_ecx = 0, tf_eax = 1, tf_trapno = 12,
tf_err = 0, tf_eip = -1066951471, tf_cs = 32, tf_eflags = 65538, tf_esp
= -383619952, tf_ss = -927947900}) at /usr/src/sys/i386/i386/trap.c:270
#5 0xc08242ea in calltrap () at /usr/src/sys/i386/i386/exception.s:139
#6 0xc0679cd1 in _mtx_lock_sleep (m=0xc8b0a414, tid=3342523776, opts=0,
file=0x0, line=0) at /usr/src/sys/kern/kern_mutex.c:546
#7 0xc072191d in ip_ctloutput (so=0x1, sopt=0xe9226c90)
at /usr/src/sys/netinet/ip_output.c:1184
#8 0xc072fe07 in tcp_ctloutput (so=0xc797b858, sopt=0xe9226c90)
at /usr/src/sys/netinet/tcp_usrreq.c:1038
#9 0xc06bea50 in sosetopt (so=0xc797b858, sopt=0xe9226c90)
at /usr/src/sys/kern/uipc_socket.c:1563
#10 0xc06c3dc5 in kern_setsockopt (td=0xc73add80, s=0, level=1, name=1,
val=0x0, valseg=UIO_USERSPACE, valsize=6)
at /usr/src/sys/kern/uipc_syscalls.c:1351
#11 0xc06c3ce6 in setsockopt (td=0xc73add80, uap=0x1)
at /usr/src/sys/kern/uipc_syscalls.c:1307
#12 0xc0838127 in syscall (frame=
{tf_fs = -65477, tf_es = 65595, tf_ds = -1078001605, tf_edi = 1,
tf_esi = 0, tf_ebp = -1077941176, tf_isp = -383619740, tf_ebx = 0,
tf_edx = 0, tf_ecx = 0, tf_eax = 105, tf_trapno = 12, tf_err = 2, tf_eip
= 672093283, tf_cs = 51, tf_eflags = 642, tf_esp = -1077941220, tf_ss =
59})
at /usr/src/sys/i386/i386/trap.c:983
#13 0xc082433f in Xint0x80_syscall ()
at /usr/src/sys/i386/i386/exception.s:200
#14 0x00000033 in ?? ()
(kgdb)
-----end crash dump-----
More information about the freebsd-stable
mailing list