Device recognition on Intel mainboard SE7520BD2
Petr Murmak
petr at cdr.cz
Sat Jan 14 10:07:56 PST 2006
Hi!
I just bought Intel's mainboard SE7520BD2 (DDR1 variant with SCSI) with 2
Xeons and wanna use AMD64 FreeBSD 6.0 STABLE. After instalation 6.0-RELEASE
and even after upgrading to latest STABLE i have one problem and one glitch.
Problem is that this mainboard has 2 Intel PRO/1000 Network interfaces but
FreeBSD shows only one, em1 is missing (it is enabled in BIOS and properly
connected to switch):
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xec80-0xecbf mem 0xfebe0000-0xfebfffff irq 16 at device 4.0 on pci7
And glitch is that there is some ACPI related errors but everything seems
working fine (recompiled world and kernel without any problem):
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ACPI-0397: *** Error: NsSearchAndEnter: Bad character in ACPI Name:
e78a0474
ACPI-0438: *** Error: Looking up [0x5f032f5c] (NON-ASCII)
in namespace, AE_BAD_CHARACTER
SearchNode 0xffffff0000826cc0 StartNode 0xffffff0000826cc0 ReturnNode
0xffffff000083b440
ACPI-1304: *** Error: Method execution failed [\\_GPE.PXL1] (Node
0xffffff0000826cc0), AE_BAD_CHARACTER
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
If you need something from me to add proper recognition for 2nd network
adapter or fixing this glitch, tell me. I found in list that somebody
earlier also had problem with recognition em network interface but for him
simply using ifconfig on non shown em interface works. For me this is not
working...
Many thanks
Petr
PS: Follows dmesg and pciconf -lv:
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.51-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100800<SYSCALL,NX,LM>
Hyperthreading: 2 logical CPUs
real memory = 2147352576 (2047 MB)
avail memory = 2066128896 (1970 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ACPI-0397: *** Error: NsSearchAndEnter: Bad character in ACPI Name:
e78a0474
ACPI-0438: *** Error: Looking up [0x5f032f5c] (NON-ASCII)
in namespace, AE_BAD_CHARACTER
SearchNode 0xffffff0000826cc0 StartNode 0xffffff0000826cc0 ReturnNode
0xffffff000083b440
ACPI-1304: *** Error: Method execution failed [\\_GPE.PXL1] (Node
0xffffff0000826cc0), AE_BAD_CHARACTER
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xc800-0xc8ff mem
0xfcec0000-0xfcecffff,0xfceb0000-0xfcebffff irq 26 at device 5.0 on pci2
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.14.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt0: 0 Active Volumes (1 Max)
mpt0: 0 Hidden Drive Members (6 Max)
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xcc00-0xccff mem
0xfcef0000-0xfcefffff,0xfcee0000-0xfceeffff irq 25 at device 5.1 on pci2
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=1.2.14.0
mpt1: Unhandled Event Notify Frame. Event 0xa.
mpt1: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt1: 0 Active Volumes (1 Max)
mpt1: 0 Hidden Drive Members (6 Max)
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver
attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <network, ethernet> at device 0.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib6
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xb880-0xb89f irq 16
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbc00-0xbc1f irq 19
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbc80-0xbc9f irq 18
at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfccfec00-0xfccfefff irq 23
at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xec80-0xecbf mem 0xfebe0000-0xfebfffff irq 16 at device 4.0 on pci7
em0: Ethernet address: 00:0e:0c:4e:e4:0a
pci7: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xce7ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: DVDROM <TOSHIBA DVD-ROM SD-M1402/1000> at ata0-master UDMA33
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
da0 at mpt0 bus 0 target 0 lun 0
da0: <SB-2803S Volume Set # 00 R001> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 141821MB (290450432 512 byte sectors: 255H 63S/T 18079C)
hostb0 at pci0:0:0: class=0x060000 card=0x34398086 chip=0x35908086
rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'E752x Server Memory Controller Hub'
class = bridge
subclass = HOST-PCI
none0 at pci0:0:1: class=0xff0000 card=0x34398086 chip=0x35918086 rev=0x0c
hdr=0x00
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub Error Reporting Registers'
none1 at pci0:1:0: class=0x088000 card=0x34398086 chip=0x35948086 rev=0x0c
hdr=0x00
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub DMA Controller'
class = base peripheral
pcib1 at pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port A0'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:4:0: class=0x060400 card=0x00000050 chip=0x35978086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port B0'
class = bridge
subclass = PCI-PCI
pcib5 at pci0:5:0: class=0x060400 card=0x00000050 chip=0x35988086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port B1'
class = bridge
subclass = PCI-PCI
pcib6 at pci0:6:0: class=0x060400 card=0x00000050 chip=0x35998086 rev=0x0c
hdr=0x01
vendor = 'Intel Corporation'
device = 'E752x Memory Controller Hub PCI Express Port C0'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x34398086 chip=0x24d28086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x34398086 chip=0x24d48086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x34398086 chip=0x24d78086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller'
class = serial bus
subclass = USB
ehci0 at pci0:29:7: class=0x0c0320 card=0x34398086 chip=0x24dd8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller'
class = serial bus
subclass = USB
pcib7 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0xc2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub
Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:1: class=0x01018a card=0x34398086 chip=0x24db8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
class = mass storage
subclass = ATA
none2 at pci0:31:3: class=0x0c0500 card=0x34398086 chip=0x24d38086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) SMBus Controller'
class = serial bus
subclass = SMBus
pcib2 at pci1:0:0: class=0x060400 card=0x00000044 chip=0x03298086 rev=0x09
hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge A'
class = bridge
subclass = PCI-PCI
none3 at pci1:0:1: class=0x080020 card=0x34398086 chip=0x03268086 rev=0x09
hdr=0x00
vendor = 'Intel Corporation'
device = 'PCI Bridge Hub I/OxAPIC Interrupt Controller A'
class = base peripheral
subclass = interrupt controller
pcib3 at pci1:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 rev=0x09
hdr=0x01
vendor = 'Intel Corporation'
device = '6700PXH PCI Express-to-PCI Express Bridge B'
class = bridge
subclass = PCI-PCI
none4 at pci1:0:3: class=0x080020 card=0x34398086 chip=0x03278086 rev=0x09
hdr=0x00
vendor = 'Intel Corporation'
device = 'PCI Bridge Hub I/OxAPIC Interrupt Controller B'
class = base peripheral
subclass = interrupt controller
mpt0 at pci2:5:0: class=0x010000 card=0x34398086 chip=0x00301000 rev=0x08
hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
mpt1 at pci2:5:1: class=0x010000 card=0x34398086 chip=0x00301000 rev=0x08
hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
class = mass storage
subclass = SCSI
none5 at pci5:0:0: class=0x020000 card=0x50218086 chip=0x436111ab rev=0x17
hdr=0x00
vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
device = '88E8036 Marvell Yukon -EC 88E8050 PCI Express Gigabit
Ethernet Controller'
class = network
subclass = ethernet
em0 at pci7:4:0: class=0x020000 card=0x34398086 chip=0x10768086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = '82547EI Gigabit Ethernet Controller'
class = network
subclass = ethernet
none6 at pci7:12:0: class=0x030000 card=0x34398086 chip=0x47521002
rev=0x27 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Rage XL PCI'
class = display
subclass = VGA
More information about the freebsd-stable
mailing list