6.0 on Dell 1850 with PERC4e/DC RAID?
Scott Mitchell
scott+lists.freebsd at fishballoon.org
Thu Jan 5 16:01:24 PST 2006
On Thu, Jan 05, 2006 at 03:34:24PM -0800, Doug White wrote:
> On Thu, 5 Jan 2006, Scott Mitchell wrote:
>
> > Hi all,
> >
> > I may be getting a new Dell PE1850 soon, to replace our ancient CVS server
> > (still running 4-STABLE). The new machine will ideally run 6.0 and have a
> > PERC4e/DC RAID card - the one with battery-backed cache. This is listed as
> > supported by amr(4), but I'm wondering how well it actually works in the
> > case of a disk failure. Will the driver tell me that disk has failed (a
> > syslog message would be enough) or will I have to make a daily trip into
> > the server room to check the front panel lights? Presumably it handles
> > hot-swapping a replacement drive OK?
>
> >From what I remember, you will receive status-change kernel messages when
> disks disappear, rebuilds start, and so forth. So for most day-to-day
> manipulation you should be fine.
That would be fine - as long as there's some notification of important
events.
> You may want to make sure the auto rebuild option is enabled in the
> controller's BIOS since no working control programs from userland are
> generally available at this time. That also means you can't create new
> volumes at runtime, but thats not so horrible...
I expect there will only ever be one volume, so that's unlikely to be a
problem :)
Many thanks,
Scott
--
===========================================================================
Scott Mitchell | PGP Key ID | "Eagles may soar, but weasels
Cambridge, England | 0x54B171B9 | don't get sucked into jet engines"
scott at fishballoon.org | 0xAA775B8B | -- Anon
More information about the freebsd-stable
mailing list