ATA problems again ... general problem of ICH7 or ATA?

[Dominic Marks]

Patrick M. Hausen wrote:
> Hi, Dominic!
> 
> On Mon, Aug 21, 2006 at 02:40:17PM +0100, Dominic Marks wrote:
> 
>> hw.pci3.13.INTA.irq="17"
>>
>> The `13' value is the device number, you can find this in dmesg, same 
>> for pciN.
> 
> So I tried this:
> 
> em1: <Intel(R) PRO/1000 Network Connection Version - 6.0.5> port 0x5000-0x501f mem 0xdc180000-0xdc19ffff,0xdc100000-0xdc17ffff irq 17 at device 0.0 on pci5
> atapci1: <Intel ICH7 SATA300 controller> port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xdc500400-0xdc5007ff irq 19 at device 31.2 on pci0
> 
> hw.pci0.31.2.INTA.irq="17"
> 
> to force atapci1 to the same irq as em1. Didn't work. It's
> still using 19. Any hints?

I myself only learnt about this relatively recently, so afraid not.
Have you checked that it doesnt work if you use hw.pci5 I'm just
guessing here, but it might be worth a shot.

Cheers,
Dominic

> Thanks,
> 
> Patrick M. Hausen
> Leiter Netzwerke und Sicherheit