HP DL140 and ata0-slave: FAILURE-ATA_IDENTIFY timed out.

[peceka]

Hi,

we've got HP DL-140 G3. When trying to startup
installation CD of FBSD 5.4 on it we've got:

atapci0: <Intel ICH5 SATA150 controller> port
0x1470-0x147f,0x376,0x170-0x177,0x3f6,-x1f0-0x1f7 at device 31.2 on
pci0
ata0: channel #0 on atapci0
ata1: channel #0 on atapci0
...
ata0-slave: FAILURE-ATA_IDENTIFY timed out.
ata0-slave: FAILURE-ATA_IDENTIFY timed out.
ata0-master: FAILURE-ATA_IDENTIFY timed out.
ata0-master: FAILURE-ATA_IDENTIFY timed out.
ata0-slave: FAILURE-ATA_IDENTIFY timed out.
ata1-master: FAILURE-ATA_IDENTIFY timed out.
ata1-master: FAILURE-ATA_IDENTIFY timed out.

And after a while sysinstall start up, but there is no disks to
partition it.

FBSD 6-BETA4 is OK, and FBSD 4.11 too. But only in 5 it's broken.

Can anybody tell what wrong with this?

Best Regards,
p.