fatal trap 12 on ASRock K7Upgrade-880 board
Holger Kipp
hk at alogis.com
Sun May 8 05:39:02 PDT 2005
Hi,
I have a very interesting behaviour here. During boot, I can use
the keyboard (eg on the initial boot menu), but if I press a key
after the message
"Starting sshd"
was printed (and before the login prompt), I get
-----------------------
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xae
fault code = supervisor read, page not present
instruction pointer = 0x8:0xae
stack pointer = 0x10:0xd41bdc94
frame pointer = 0x10:0xd41bdcb0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (irq1: atkbd0)
trap number = 12
panic: page fault
Uptime: 21s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
-----------------------
Anything stupid I have missed?
Regards,
Holger Kipp
- - - - - - - - - - - - - - - - - - - - -
dmesg is:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #5: Thu May 5 21:18:07 CEST 2005
root at katrin.hkipp.de:/usr/obj/usr/src/sys/KATRIN
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Duron(tm) (1300.06-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x671 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536543232 (511 MB)
avail memory = 515383296 (491 MB)
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xd800-0xd8ff,0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 20 at device 15.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem 0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0b:6a:c0:00:ce
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 640C> MLC,PCL,PML
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhub4: Cypress Semiconductor Slim Hub, class 9/0, rev 2.00/0.08, addr 2
uhub4: 4 ports with 4 removable, self powered
umass0: SMSC 223 USB97C223, rev 2.00/1.95, addr 3
uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 4
Timecounter "TSC" frequency 1300055309 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 152627MB <SAMSUNG SP1614N/TM100-30> [310101/16/63] at ata0-master UDMA100
ad1: 76351MB <SAMSUNG SP0802N/TK100-24> [155127/16/63] at ata0-slave UDMA100
acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A102> at ata1-master UDMA33
acd1: CDRW <HL-DT-ST RW/DVD GCC-4120B/2.01> at ata1-slave PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4163B A102> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <HL-DT-ST RW/DVD GCC-4120B 2.01> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SMSC 223 U HS-CF 1.95> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <SMSC 223 U HS-MS 1.95> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <SMSC 223 U HS-SM 1.95> Removable Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <SMSC 223 U HS-SD/MMC 1.95> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
(da0:umass-sim0:0:0:0): Medium not present
(da0:umass-sim0:0:0:0): Unretryable error
Opened disk da0 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
(da1:umass-sim0:0:0:1): Medium not present
(da1:umass-sim0:0:0:1): Unretryable error
Opened disk da1 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:2): SCSI Status: Check Condition
(da2:umass-sim0:0:0:2): NOT READY asc:3a,0
(da2:umass-sim0:0:0:2): Medium not present
(da2:umass-sim0:0:0:2): Unretryable error
Opened disk da2 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
(da3:umass-sim0:0:0:3): Medium not present
(da3:umass-sim0:0:0:3): Unretryable error
Opened disk da3 -> 6
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /mnt was not properly dismounted
WARNING: /mnt/var was not properly dismounted
WARNING: /mnt/tmp was not properly dismounted
WARNING: /mnt/usr was not properly dismounted
pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
pcm0: <Unknown AC97 Codec (id = 0x434d4983)>
More information about the freebsd-stable
mailing list