Can isp driver support Qlogic 2340 on FreeBSD5.x or later?

[Wilko Bulte]

On Mon, May 02, 2005 at 04:45:10PM +0300, Danny Braniss wrote..
> > Yes, the 234X  cards have been supported for quite a while.
> > 
> it seems not all of them:
> it's a QLA2342/ISP2312 and im getting:
> isp1: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x2400-0x24ff mem 
> 0xfe8e0000-0xfe8e0fff irq 24 at device 8.0 on pci3
> isp1: bad execution throttle of 0- using 16
> isp2: <Qlogic ISP 2312 PCI FC-AL Adapter> port 0x2000-0x20ff mem 
> 0xfe8f0000-0xfe8f0fff irq 27 at device 8.1 on pci3
> isp2: bad execution throttle of 0- using 16


Have you loaded the ispfw.ko firmware module?  Matt tests the driver
against that firmware, not against all the firmware revs Qlogic has
released over time.


> 
> > DELL has a clone card which up until recently wasn't supported.
> > 
> > The 236X/63XX cards are not yet supported.
> > 
> > On 4/14/05, wsk <wsk at gddsn.org.cn> wrote:
> > > folks:
> > > Can the Qlogic 2340 Fibre Channel card works on FreeBSD now?
> > > DELL released a newest Server PE6850 with this card.thx
> > > _______________________________________________
> > > freebsd-current at freebsd.org mailing list
> > > http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > > To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
> > >
> > _______________________________________________
> > freebsd-current at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-current
> > To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
> > 
> 
> 
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
--- end of quoted text ---

-- 
Wilko Bulte				wilko at FreeBSD.org