SIIG Multiport Card

[Joe B Doran]

Here is my DMSG boot info.

Mar 21 21:41:42 	kernel: sio7: unable to activate interrupt in fast
mode - using normal mode
Mar 21 21:41:42 	kernel: sio7: type 16550A
Mar 21 21:41:42 	kernel: sio7: <Oxford Semiconductor OX16PCI954 UARTs
950A> on puc0
Mar 21 21:41:42 	kernel: sio6: unable to activate interrupt in fast
mode - using normal mode
Mar 21 21:41:42 	kernel: sio6: type 16550A
Mar 21 21:41:42 	kernel: sio6: <Oxford Semiconductor OX16PCI954 UARTs
950A> on puc0
Mar 21 21:41:42 	kernel: sio5: unable to activate interrupt in fast
mode - using normal mode
Mar 21 21:41:42 	kernel: sio5: type 16550A
Mar 21 21:41:42 	kernel: sio5: <Oxford Semiconductor OX16PCI954 UARTs
950A> on puc0
Mar 21 21:41:42 	kernel: sio4: unable to activate interrupt in fast
mode - using normal mode
Mar 21 21:41:42 	kernel: sio4: type 16550A
Mar 21 21:41:42 	kernel: sio4: <Oxford Semiconductor OX16PCI954 UARTs
950A> on puc0
Mar 21 21:41:42 	kernel: puc0: <Oxford Semiconductor OX16PCI954 UARTs
950A> port 0xe800-0xe81f,0xe700-0xe71f mem
0xec111000-0xec111fff,0xec110000-0xec110fff irq 14 at device 11.0 on pci0

Thanks
JBD

-----Original Message-----
From: owner-freebsd-stable at freebsd.org
[mailto:owner-freebsd-stable at freebsd.org] On Behalf Of Joe Doran
Sent: Monday, March 21, 2005 7:26 PM
To: freebsd-stable at freebsd.org
Subject: SIIG Multiport Card

Hello,

            I am trying to us a SIIG 4 port Multi-port card on FreeBSD 5.3,
and I am having issues with the baud rate.

The kernel finds the four ports, and I can open them, but I am unable to
change the Baud Rate. It is stuck at 115,200.

 

I have this in my kernel config.

 

device  pcu

device sio

 

Thanks

JBD

_______________________________________________
freebsd-stable at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"