5.3 STABLE Boot CD Fails on PPRO 200 (BTX halted)
edwin.brown at gmail.com
Thu Mar 3 05:15:33 GMT 2005
It boots OK from the floppies as a work around...
On Wed, 2 Mar 2005 23:48:19 -0500, Edwin Brown <edwin.brown at gmail.com> wrote:
> I've built 5.3 Stable as of tonight 03/02/2005 with the following in make.conf
> CFLAGS=-02 -pipe
> It was built on a p4.
> I went to install this on my trusty firewall machine and I get the following
> -----BEGIN ERROR-----
> CD Loader 1.2
> Building the boot loader arguments
> Looking up /BOOT/LOADER... Found
> Relocating the loader and the BTX
> Starting the BTX loader
> BTX loader 1.00 BTX version is 1.01
> int=0000000d err=000000c0 efl=00010a47 eip=00015528
> eax=00000000 ebx=00000001 ecx=ffffffff edx=00094fa0
> esi=01164e7f edi=c8b66ff7 ebp=00093ff8 esp=7c24ddf4
> cs=002b ds=0033 es=0033 fs=0033 gs=0033 ss=0033
> cs:eip=9a c0 00 00 9a c0 00 00-9a c0 00 00 9a c0 00 00
> 9a c0 00 00 9a c0 00 00-9a c0 00 00 9a c0 00 00
> ss:esp=ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff
> ff ff ff ff ff ff ff ff-ff ff ff ff ff ff ff ff
> BTX halted
> -----END ERROR-----
> Also, the 5.3.isos downloaded from ftp.freebsd.org fail to boot as well.
> It's not hardware related as I'm able to pop in a OpenBSD3.6 snapshot
> and boot from that.
> Any help would be greatly appreciated. I'm going to try the floppies next.
More information about the freebsd-stable