RELENG_6 has problems with booting

Jonathan Weiss jw at innerewut.de
Sun Jul 17 16:45:32 GMT 2005 

Cheers,


Yesterday I updated my 5-STABLE system to RELENG_6 through cvsup&make.
My machine will only boot in safe mode. Verbose or normal boot will result
in a hang that occuers normally during local package startup or filesystem
scan.

I get no panic or LOR, the machine just completely hangs.

I used the GENERIC kernel with these points added:
---------------------------------------------------
# PF
device          pf
device          pflog
device          pfsync

# ALTQ
options         ALTQ
options         ALTQ_CBQ        # Class Bases Queueing
options         ALTQ_RED        # Random Early Drop
options         ALTQ_RIO        # RED In/Out
options         ALTQ_HFSC       # Hierarchical Packet Scheduler
options         ALTQ_CDNR       # Traffic conditioner
options         ALTQ_PRIQ       # Priority Queueing
options         ALTQ_NOPCC      # Required for SMP build
options         ALTQ_DEBUG

# Sound
device                sound
device          "snd_via82c686"

#atapicam 
device                atapicam

# GBDE
options         GEOM_BDE

options COMPAT_FREEBSD5
---------------------------------------------------

I also tried a kernel with `options SMP` commented out but it still hangs.

The dmesg:
---------------------------------------------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA1 #2: Sat Jul 16 23:22:20 CEST 2005
    root at satan.nodomain:/usr/obj/usr/src/sys/XXX
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2500+ (1830.01-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory  = 536805376 (511 MB)
avail memory = 515989504 (492 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.1.INTA
$PIR: No matching entry for 0.2.INTA
$PIR: No matching entry for 0.2.INTB
$PIR: No matching entry for 0.2.INTC
$PIR: No matching entry for 0.4.INTA
$PIR: No matching entry for 0.6.INTA
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at device
0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe0003000-0xe0003fff irq 12 at
device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe0004000-0xe0004fff irq 11 at
device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0005000-0xe00050ff irq 5
at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
ulpt0: Brother HL-5040, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd000-0xd007 mem
0xe0000000-0xe0000fff irq 11 at device 4.0 on pci0
nve0: Ethernet address 00:0c:6e:57:5a:25
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: Ethernet address: 00:0c:6e:57:5a:25
nve0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 6.0 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc000-0xc01f irq 5 at device
8.0 on pci1
ed0: [GIANT-LOCKED]
ed0: Ethernet address: 00:a0:d2:14:f5:33
ed0: if_start running deferred for Giant
ed0: type NE2000 (16 bit)
dc0: <Davicom DM9102A 10/100BaseTX> port 0xc400-0xc4ff mem
0xdf000000-0xdf0000ff irq 12 at device 10.0 on pci1
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:80:ad:04:c6:78
dc0: if_start running deferred for Giant
dc0: [GIANT-LOCKED]
atapci0: <nVidia nForce2 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
$PIR: ROUTE_INTERRUPT failed.
pci2: <display, VGA> at device 0.0 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcd7ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: [FAST]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 1830013124 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <WDC WD800JB-00FSA0 77.07W77> at ata0-master PIO4
ad1: 190782MB <WDC WD2000BB-14GUA0 08.02D08> at ata0-slave PIO4
acd0: CDRW <LITE-ON LTR-12101B/LS3B> at ata1-master PIO4
acd1: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-slave PIO4
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <LITE-ON LTR-12101B LS3B> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
cd1 at ata1 bus 0 target 1 lun 0
cd1: <TOSHIBA DVD-ROM SD-M1712 1004> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
WARNING: /private was not properly dismounted
ad1: FAILURE - out of memory in start



--
Jonathan Weiss
http://blog.innerewut.de

More information about the freebsd-stable mailing list