USB changes.

Julian Elischer julian at elischer.org
Thu Apr 28 13:11:37 PDT 2005



Joe Altman wrote:

>On Thu, Apr 28, 2005 at 11:23:14AM -0700, Julian Elischer wrote:
>  
>
>

[...]

>  
>
>>I assume it works right if you remove the mouse before booting and reinsert 
>>it after the kernel has booted?
>>    
>>
>
>Yes; once I have a console, the mouse is detected:
>
>ums0: Logitech USB Receiver, rev 1.10/23.02, addr 2, iclass 3/1
>ums0: 7 buttons and Z dir.
>
>Then, it works in X just fine; I forgot to test it on the console.
>
>  
>
seems to work for me with uhci too..
can you see if changing the BIOS usb optiosn makes a difference?
[...]
uhci0: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 5 at 
device 29.0 o n pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xec00-0xec1f irq 9 at 
device 29.1 o n pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x25ab) at 29.4
pci0: <unknown card> (vendor=0x8086, dev=0x25ac) at 29.5
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ffc00-0xfe7fffff irq 
7 at de vice 29.7 on pci0
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 4 ports with 4 removable, self powered
[...]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
DUMMYNET initialized (011031)
IP packet filtering initialized, divert enabled, rule-based forwarding 
enabled, default to accept, logging disabled
IPsec: Initialized Security Association Processing.
ad0: 114473MB <ST3120026A> [232581/16/63] at ata0-master UDMA100
ums0: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM), rev 
1.10/3.00, add r 2, iclass 3/1
ums0: 3 buttons and Z dir.
Mounting root from ufs:/dev/ad0s1a





More information about the freebsd-stable mailing list