SuperMicro X5DP8-G2MB/(2)XEON 2.4/1GB RAM 5.4-S Freeze

Mon Apr 11 21:49:29 PDT 2005

Hi,

I had exactly the same issue with a X5DPR-iG2+ Supermicro motherboard, but 
solved it after just disabling Power Mgmt and Hyperthreading in the BIOS. In 
my case, it had nothing to do with the FreeBSD version or kernel , the 
machine was freezing couple of times a week during months with different 4.x 
and 5.x stable versions.

-Carlos

----- Original Message ----- 
From: "Aaron Summers" <aaronsummers at gmail.com>
To: <stable at freebsd.org>
Sent: Monday, April 11, 2005 11:12 PM
Subject: SuperMicro X5DP8-G2MB/(2)XEON 2.4/1GB RAM 5.4-S Freeze

> Greetings,
>
> We have a SuperMicro X5DP8-G2 Motherboard, 2xXEON 2.4, 1GB RAM server
> running 5.4-STABLE that keeps freezing up.  We have replaced RAM, HD,
> SCSI controller, etc.  To no avail.  We are running SMP GENERIC
> Kernel.  I cannot get the system to panic, leave a core dump, etc.  It
> just always freezes.  The server functions as a web server in a
> HSphere Cluster.  I am about out of options besides loading 4.11
> (since our 4 series servers never die).  Any help, feedback, clues,
> similar experiences, etc would be greatly appreciated.
>
> On SCSI:  The onboard Adaptec 7902 gives a dump on bootup but appears
> to work.  I read the archived post about this issue.  The system still
> locked up with an Adaptec 7982B that did not give this message.
>
> DMESG:
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.4-STABLE #2: Sat Apr  9 09:16:44 EST 2005
>    root at unix17:/usr/obj/usr/src/sys/SMP
> ACPI APIC Table: <PTLTD  APIC  >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.33-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
> 
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Hyperthreading: 2 logical CPUs
> real memory  = 1073217536 (1023 MB)
> avail memory = 1040605184 (992 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
> cpu2 (AP): APIC ID:  6
> cpu3 (AP): APIC ID:  7
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> ioapic3 <Version 2.0> irqs 72-95 on motherboard
> ioapic4 <Version 2.0> irqs 96-119 on motherboard
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <PTLTD   RSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU (2 Cx states)> on acpi0
> cpu1: <ACPI CPU (2 Cx states)> on acpi0
> cpu2: <ACPI CPU (2 Cx states)> on acpi0
> cpu3: <ACPI CPU (2 Cx states)> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <unknown> at device 0.1 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <base peripheral, interrupt controller> at device 28.0 (no
> driver attached)
> pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> pci1: <base peripheral, interrupt controller> at device 30.0 (no
> driver attached)
> pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1
> pci3: <ACPI PCI bus> on pcib3
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
> 0x3000-0x303f mem 0xfc200000-0xfc21ffff irq 28 at device 2.0 on pci3
> em0: Ethernet address: 00:30:48:2d:0a:2c
> em0:  Speed:N/A  Duplex:N/A
> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
> 0x3040-0x307f mem 0xfc220000-0xfc23ffff irq 29 at device 2.1 on pci3
> em1: Ethernet address: 00:30:48:2d:0a:2d
> em1:  Speed:N/A  Duplex:N/A
> pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> pci4: <base peripheral, interrupt controller> at device 28.0 (no
> driver attached)
> pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4
> pci5: <ACPI PCI bus> on pcib5
> pci4: <base peripheral, interrupt controller> at device 30.0 (no
> driver attached)
> pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4
> pci6: <ACPI PCI bus> on pcib6
> ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> 0x4000-0x40ff,0x4400-0x44ff mem 0xfc400000-0xfc401fff irq 76 at device
> 2.0 on pci6
> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
> ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port
> 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc402000-0xfc403fff irq 77 at device
> 2.1 on pci6
> aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
> 0x2000-0x201f irq 16 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
> 0x2020-0x203f irq 19 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
> 0x2040-0x205f irq 18 at device 29.2 on pci0
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci7: <ACPI PCI bus> on pcib7
> pci7: <display, VGA> at device 1.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 UDMA100 controller> port
> 0x2060-0x206f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on
> pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on 
> acpi0
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> orm0: <ISA Option ROMs> at iomem
> 0xe0000-0xe3fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 10.000 msec
> acd0: CDROM <CD-224E/1.9A> at ata0-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> ahd0: Invalid Sequencer interrupt occurred.
>>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> ahd0: Dumping Card State at program address 0x23b Mode 0x0
> Card was paused
> INTSTAT[0x0] SELOID[0x2] SELID[0x40] HS_MAILBOX[0x0]
> INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
> DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
> SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
> LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
> SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0]
> SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
> SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x4]
> KERNEL_QFREEZE_COUNT[0x4] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
> SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
> SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
> LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
> LQOSTAT2[0x0]
>
> SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0xb NEXTSCB 0xff40
> qinstart = 46 qinfifonext = 47
> QINFIFO: 0x9
> WAITING_TID_QUEUES:
> Pending list:
>  9 FIFO_USE[0x0] SCB_CONTROL[0x48]:(STATUS_RCVD|DISCENB) SCB_SCSIID[0x27]
> Total 1
> Kernel Free SCB list: 11 13 15 1 2 3 4 5 6 7 8 10 12 14 0
> Sequencer Complete DMA-inprog list:
> Sequencer Complete list:
> Sequencer DMA-Up and Complete list:
> Sequencer On QFreeze and Complete list:
>
>
> ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0xd
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
> SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
> SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
> SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
> HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
>
> ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x9
> SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
> SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
> SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
> SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
> HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
> LQIN: 0x8 0x0 0x0 0xd 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
> 0x0 0x0 0x0 0x0
> ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
> ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
> ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
>
> SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
> CCSCBCTL[0x4]:(CCSCBDIR)
> ahd0: REG0 == 0xac95, SINDEX = 0x10e, DINDEX = 0x106
> ahd0: SCBPTR == 0xd, SCB_NEXT == 0xff40, SCB_NEXT2 == 0xff8d
> CDB 12 20 0 80 88 53
> STACK: 0x236 0x2 0x0 0x0 0x0 0x0 0x0 0x0
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> ses0 at ahd0 bus 0 target 6 lun 0
> ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
> ses0: 3.300MB/s transfers
> ses0: SAF-TE Compliant Device
> Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0
> 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
> Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0
> 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
> Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0
> 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> da2 at ahd0 bus 0 target 4 lun 0
> da2: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
> da2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
> Queueing Enabled
> da2: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
> da0 at ahd0 bus 0 target 0 lun 0
> da0: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device
> da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
> Queueing Enabled
> da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
> da1 at ahd0 bus 0 target 2 lun 0
> da1: <SEAGATE ST336754LC 0002> Fixed Direct Access SCSI-3 device
> da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged
> Queueing Enabled
> da1: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
> Mounting root from ufs:/dev/da0s1a
>
> -- 
> Aaron Summers
> aaronsummers at gmail.com
> http://insight.ath.cx
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
> 