Intel 6300ESB (ICH) SMBus controller not working
Philip Murray
pmurray at nevada.net.nz
Mon Apr 11 18:24:46 PDT 2005
Hi,
I'm running RELENG_5 on a Dell PowerEdge 750 and the ichsmb driver
doesn't want to work with it, I get the following on boot:
ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x8c0-0x8df irq 17
at device 31.3 on pci0
device_attach: ichsmb0 attach returned 6
It then doesn't load smb or smbus. I had a look in the source and it is
supposed to work with this controller.
Is this something wrong with the driver? or have I left out some bit of
configuration?
Attached is the output from boot -v and my kernel configuration. Is
there any other debugging output that would be useful?
Cheers,
Phil
--
-------------- next part --------------
include GENERIC
ident ALEXIS
options HZ=1000
options MAXDSIZ="(1024*1024*1024)"
options MAXSSIZ="(1024*1024*1024)"
options DFLDSIZ="(1024*1024*1024)"
options SEMMNI=256
options SEMMNS=512
options SEMMNU=256
options SEMMAP=256
options SHMMAXPGS=4096
options ACCEPT_FILTER_HTTP
device smb
device smbus
device ichsmb
device iic
device iicbus
device iicbb
device iicsmb
device usb
device uhci
device ehci
-------------- next part --------------
-------------- next part --------------
/boot/kernel/acpi.ko text=0x41480 data=0x1da4+0x112c syms=[0x4+0x7630+0x4+0x9c97]
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=01 base=0000000000100000 len=000000007fec0000
SMAP type=02 base=000000007ffcfc00 len=0000000000000400
SMAP type=03 base=000000007ffc0000 len=000000000000fc00
SMAP type=02 base=000000007ffd0000 len=0000000000020000
SMAP type=02 base=000000007fff0000 len=000000000000f000
SMAP type=02 base=00000000fed20000 len=000000000006ffff
SMAP type=02 base=00000000fec00000 len=0000000000090000
SMAP type=02 base=00000000fee00000 len=0000000000010000
SMAP type=02 base=00000000ffb00000 len=0000000000500000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #4: Mon Apr 11 12:24:01 NZST 2005
root at alexis.open2view.com:/usr/obj/usr/src/sys/ALEXIS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a45000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a4526c.
Calibrating clock(s) ... i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3400136841 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (3400.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147221504 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000007db90fff, 2096545792 bytes (511852 pages)
avail memory = 2095755264 (1998 MB)
Table 'FACP' at 0xfdc84
Table 'APIC' at 0xfdcf8
MADT: Found table at 0xfdcf8
MP Configuration Table version 1.4 found at 0xc00f0000
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
ACPI APIC Table: <DELL PE750 >
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xc9de
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 3, Interrupt 24 at 0xfec10000
ioapic1: Changing APIC ID to 3
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: active-high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE750> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000ec2c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25788086)
pcibios: BIOS version 2.10
Found $PIR table, 7 entries at 0xc00fc570
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 31 B 0x61 3 4 5 6 7 10 11
embedded 0 29 A 0x60 3 4 5 6 7 10 11
embedded 0 29 B 0x63 3 4 5 6 7 10 11
embedded 0 29 D 0x6b 3 4 5 6 7 10 11
embedded 1 1 A 0x62 3 4 5 6 7 10 11
embedded 3 2 A 0x69 3 4 5 6 7 10 11
slot 1 3 3 A 0x6a 3 4 5 6 7 10 11
slot 1 3 3 B 0x69 3 4 5 6 7 10 11
slot 1 3 3 C 0x6a 3 4 5 6 7 10 11
slot 1 3 3 D 0x69 3 4 5 6 7 10 11
slot 2 2 1 A 0x6a 3 4 5 6 7 10 11
slot 2 2 1 B 0x6a 3 4 5 6 7 10 11
slot 2 2 1 C 0x6a 3 4 5 6 7 10 11
slot 2 2 1 D 0x6a 3 4 5 6 7 10 11
slot 3 2 2 A 0x6a 3 4 5 6 7 10 11
slot 3 2 2 B 0x6a 3 4 5 6 7 10 11
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base fe800000, size 22, enabled
found-> vendor=0x8086, dev=0x2578, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x257b, revid=0x02
bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25ae, revid=0x02
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0030, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000cce0, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x25a9, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 0000ccc0, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x25aa, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
found-> vendor=0x8086, dev=0x25ab, revid=0x02
bus=0, slot=29, func=4
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25ac, revid=0x02
bus=0, slot=29, func=5
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base fe300000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x25ad, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0x0a
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0b (2750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25a1, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fea0, size 4, enabled
found-> vendor=0x8086, dev=0x25a3, revid=0x02
bus=0, slot=31, func=2
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02a8, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 000008c0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x25a4, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfe100000-0xfe2fffff
pcib1: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base fe1e0000, size 17, enabled
pcib1: device (null) requested decoded memory range 0xfe1e0000-0xfe1fffff
map[18]: type 4, range 32, base 0000ece0, size 5, enabled
pcib1: device (null) requested decoded I/O range 0xece0-0xecff
pcib1: matched entry for 1.1.INTA
pcib1: slot 1 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1075, revid=0x00
bus=1, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0238, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 2 supports D0 D3 current D0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xece0-0xecff mem 0xfe1e0000-0xfe1fffff irq 18 at device 1.0 on pci1
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe1e0000
em0: Reserved 0x20 bytes for rid 0x18 type 4 at 0xece0
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:11:43:ce:9e:6c
em0: Speed:N/A Duplex:N/A
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
uhci0: <UHCI (generic) USB controller> port 0xcce0-0xccff irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcce0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xccc0-0xccdf irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xccc0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 29.5 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe300000-0xfe3003ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfe300000
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xd000-0xdfff
pcib3: memory decode 0xfc000000-0xfdffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pcib3: Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
map[10]: type 1, range 32, base fdee0000, size 17, enabled
pcib3: device (null) requested decoded memory range 0xfdee0000-0xfdefffff
map[18]: type 4, range 32, base 0000dcc0, size 6, enabled
pcib3: device (null) requested decoded I/O range 0xdcc0-0xdcff
pcib3: matched entry for 3.2.INTA
pcib3: slot 2 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x1076, revid=0x00
bus=3, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=21
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fc000000, size 24, enabled
pcib3: device (null) requested decoded memory range 0xfc000000-0xfcffffff
map[14]: type 4, range 32, base 0000d800, size 8, enabled
pcib3: device (null) requested decoded I/O range 0xd800-0xd8ff
map[18]: type 1, range 32, base fdedf000, size 12, enabled
pcib3: device (null) requested decoded memory range 0xfdedf000-0xfdedffff
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=3, slot=14, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x00a7, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xdcc0-0xdcff mem 0xfdee0000-0xfdefffff irq 21 at device 2.0 on pci3
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfdee0000
em1: Reserved 0x40 bytes for rid 0x18 type 4 at 0xdcc0
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:11:43:ce:9e:6d
em1: Speed:N/A Duplex:N/A
pci3: <display, VGA> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB SATA150 controller> port 0xfea0-0xfeaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfea0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=01
ata0-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x01 err=0x04 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata1: [MPSAFE]
ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x8c0-0x8df irq 17 at device 31.3 on pci0
ichsmb0: can't map I/O
device_attach: ichsmb0 attach returned 6
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: irq maps: 0x4001 0x4011 0x4001 0x4001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc9000-0xc9fff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4001 0x4001 0x4001 0x4001
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 40 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134358 -> 100000
procfs registered
Timecounter "TSC" frequency 3400136841 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
acd0: <TEAC CD-ROM CD-224E/K.9A> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad2: <Maxtor 7Y250M0/YAR51HW0> ATA-7 disk at ata1-master
ad2: 238418MB (488281250 sectors), 484406 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, SATA150
ar: FreeBSD check1 failed
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
GEOM: new disk ad2
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:488279547
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 249999128064 end 249999160319
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad2s1a, start 0 length 1073741824 end 1073741823
GEOM: Configure ad2s1b, start 1073741824 length 4294967296 end 5368709119
GEOM: Configure ad2s1c, start 0 length 249999128064 end 249999128063
GEOM: Configure ad2s1d, start 5368709120 length 1073741824 end 6442450943
GEOM: Configure ad2s1e, start 6442450944 length 1073741824 end 7516192767
GEOM: Configure ad2s1f, start 7516192768 length 242482935296 end 249999128063
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
Mounting root from ufs:/dev/ad2s1a
start_init: trying /sbin/init
Pre-seeding PRNG: kickstart.
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
swapon: adding /dev/ad2s1b as swap device
Starting file system checks:
/dev/ad2s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad2s1a: clean, 478280 free (656 frags, 59703 blocks, 0.1% fragmentation)
/dev/ad2s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad2s1d: clean, 506475 free L(43 frags, 63304i blocks, 0.0% frnagmentation)
/duev/ad2s1f: FILE xSYSTEM CLEAN; SK IPPING CHECKS
/Edev/ad2s1f: cleaLn, 112571103 freFe (32135 frags, 14067371 blocks,e 0.0% fragmentatxion)
/dev/ad2s1ee: FILE SYSTEM CcLEAN; SKIPPING C HECKS
/dev/ad2sh1e: clean, 48215a2 free (248 fragns, 60238 blocks,d 0.0% fragmentatlion)
er installed
linprocfs registered
Setting hostname: alexis.open2view.com.
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 203.97.20.198 netmask 0xfffffff8 broadcast 203.97.20.199
inet6 fe80::211:43ff:fece:9e6c%em0 prefixlen 64 tentative scopeid 0x1
inet 10.58.4.8 netmask 0xffffff00 broadcast 10.58.4.255
ether 00:11:43:ce:9e:6c
media: Ethernet autoselect
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
add net default: gateway 203.97.20.193
add net 10.58.0.0: gateway 10.58.4.1
Additional routing options:.
Starting devd.
Mounting NFS file systems:.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
Starting local daemons:.
Updating motd.
Configuring syscons: blanktime.
Starting sshd.
Initial i386 initialization:.
Additional ABI support: linuxem0: Link is up 100 Mbps Full Duplex
.
Starting cron.
Local package initialization: tomcat50Starting mysql.
.
Additional TCP options:.
Starting background file system checks in 60 seconds.
Mon Apr 11 12:54:18 NZST 2005
FreeBSD/i386 (alexis.open2view.com) (ttyd0)
login:
More information about the freebsd-stable
mailing list