Error reading CD on 5.4 RC1

Fri Apr 8 08:49:38 PDT 2005

I am not sure this is directly related to 5.4 RC1 any suggestions are 
appreciated.

acd0: FAILURE - READ_BIG HARDWARE ERROR asc=0x08 ascq=0x03 error=0
acd0: TIMEOUT - READ_BIG retrying (2 retries left)

also had this from the install:
acd0: FAILURE - READ_BIG HARDWARE ERROR asc=0x08 ascq=0x03 error=0
acd0: WARNING - READ_BIG read data overrun 2048>0
acd0: TIMEOUT - READ_BIG retrying (2 retries left)
acd0: unknown transfer phase
acd0: WARNING - READ_BIG read data overrun 18>0
acd0: FAILURE - READ_BIG HARDWARE ERROR asc=0x08 ascq=0x03 error=0

Notes on weird stuff:
1) Does not seem to happen until I install my Adaptec SCSI RAID 2230S. 
Don't know why.
2) I need to use 5.4 to get support for 2230S without patching.
3) cpio hangs at this error.  IE: during install I get a hang or 
running sysinstall to install ports etc.
4)  acd0: DVDROM <TEAC DVD-ROM DV-28E-C/D.4B> at ata0-master UDMA33, 
previous 2 systems I setup used a CD drive with no problems (May be 
related to Teac DVD?)

%uname -a
FreeBSD odo.icarz.com 5.4-RC1 FreeBSD 5.4-RC1 #0: Sun Apr  3 15:40:32 
UTC 2005     root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC 
i386
%
%dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
1994
        The Regents of the University of California. All rights 
reserved.
FreeBSD 5.4-RC1 #0: Sun Apr  3 15:40:32 UTC 2005
    root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.71-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2952527872 (2815 MB)
avail memory = 2886893568 (2753 MB)
ACPI APIC Table: <DELL   PE BKC  >
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 != expected base 56
ioapic3: Changing APIC ID to 11
ioapic3: WARNING: intbase 96 != expected base 88
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 
0xdcc0-0xdcff mem 0xd86e0000-0xd86fffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:11:43:ed:7f:52
em0:  Speed:N/A  Duplex:N/A
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 
0xccc0-0xccff mem 0xd84e0000-0xd84fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:11:43:ed:7f:53
em1:  Speed:N/A  Duplex:N/A
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib9
aac0: <Adaptec SCSI RAID 2230S> mem 
0xc8000000-0xcfffffff,0xd7000000-0xd77fffff irq 106 at device 4.0 on 
pci9
aac0: Unknown processor 200MHz, 112MB cache memory, optional battery 
not installed
aac0: Kernel 4.2-0, Build 7348, S/N 264aec
aac0: Supported 
Options=31d7c<WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD>
aacp0: <SCSI Passthrough Bus> on aac0
aacp1: <SCSI Passthrough Bus> on aac0
pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8
pci10: <ACPI PCI bus> on pcib10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x9ce0-0x9cff 
irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x9cc0-0x9cdf 
irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x9ca0-0x9cbf 
irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on 
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on 
acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 
on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem 
0xec000-0xeffff,0xd0800-0xd17ff,0xcc000-0xd07ff,0xcb000-0xcbfff,0xc0000-0xcafff 
on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
isa0
uhub3: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub3: 2 ports with 2 removable, self powered
Timecounter "TSC" frequency 2992713368 Hz quality 800
Timecounters tick every 10.000 msec
acd0: DVDROM <TEAC DVD-ROM DV-28E-C/D.4B> at ata0-master UDMA33
aacd0: <RAID 0/1> on aac0
aacd0: 139948MB (286613504 sectors)
ses0 at aacp0 bus 0 target 6 lun 0
ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed unknown SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
ses1 at aacp1 bus 0 target 6 lun 0
ses1: <PE/PV 1x4 SCSI BP 1.0> Fixed unknown SCSI-2 device
ses1: 3.300MB/s transfers
ses1: SAF-TE Compliant Device
pass0 at aacp0 bus 0 target 0 lun 0
pass0: <FUJITSU MAT3073NC 5704> Fixed unknown SCSI-3 device
pass0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit)
pass1 at aacp0 bus 0 target 1 lun 0
pass1: <FUJITSU MAT3073NC 5704> Fixed unknown SCSI-3 device
pass1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit)
pass3 at aacp1 bus 0 target 2 lun 0
pass3: <FUJITSU MAT3073NC 5704> Fixed unknown SCSI-3 device
pass3: 160.000MB/s transfers (80.000MHz, offset 127, 16bit)
pass4 at aacp1 bus 0 target 3 lun 0
pass4: <FUJITSU MAT3073NC 5704> Fixed unknown SCSI-3 device
pass4: 160.000MB/s transfers (80.000MHz, offset 127, 16bit)
Mounting root from ufs:/dev/aacd0s1a
WARNING: /mnt was not properly dismounted
WARNING: /mnt/usr was not properly dismounted
WARNING: /mnt/var was not properly dismounted
acd0: FAILURE - READ_BIG HARDWARE ERROR asc=0x08 ascq=0x03 error=0
acd0: TIMEOUT - READ_BIG retrying (2 retries left)
em0: Link is up 100 Mbps Full Duplex
%

-----------------------------------------------------
Ken Menzel  ICQ# 9325188
www.icarz.com  kenm at icarz.com
/earth is 98% full ... please delete anyone you can. 