USB2 device
Michael E. Mercer
mmercer at nc.rr.com
Mon Mar 29 20:49:57 PST 2004
Wes,
Thanks for the info. However it works just fine plugged into that hub
when running winblows...
Any ideas?
Thanks
Michael
On Mon, 2004-03-29 at 23:44, Wes Peters wrote:
> On Monday 29 March 2004 20:10, Michael E. Mercer wrote:
> > Julian,
> >
> > It works if I plug it directly into a usb port on my PC. But it does
> > not get seen if I plug it into a SIIG SlimHub 2.0.
> >
> > Any ideas?
>
> Yeah, look at the power requirements:
>
> > > jtest# usbdevs -v
> > > Controller /dev/usb0:
> > > addr 1: low speed, self powered, config 1, UHCI root hub(0x0000),
> ^^^^^^^^^^^^
> > > Intel(0x0000), rev 1.00
> > > port 1 powered
> > > port 2 addr 2: low speed, self powered, config 1, HP ScanJet
> ^^^^^^^^^^^^
> > > 6200C(0x0201), Hewlett-Packard(0x03f0), rev 1.00
> > > Controller /dev/usb1:
> > > addr 1: low speed, self powered, config 1, UHCI root hub(0x0000),
> ^^^^^^^^^^^^
> > > Intel(0x0000), rev 1.00
> > > port 1 powered
> > > port 2 powered
> > > Controller /dev/usb2:
> > > addr 1: low speed, self powered, config 1, UHCI root hub(0x0000),
> ^^^^^^^^^^^^
> > > Intel(0x0000), rev 1.00
> > > port 1 powered
> > > port 2 powered
> > > Controller /dev/usb3:
> > > addr 1: low speed, self powered, config 1, EHCI root hub(0x0000),
> ^^^^^^^^^^^^
> > > (0x8086)(0x0000), rev 1.00
> > > port 1 powered
> > > port 2 powered
> > > port 3 powered
> > > port 4 powered
> > > port 5 powered
> > > port 6 addr 2: low speed, power 200 mA, config 1, JUMPDRIVE
> ^^^^^^^^^^^^
> > > PRO(0x0200), LEXAR MEDIA(0x05dc), rev 0.00
>
> This has to be plugged into a powered port. On a USB hub, this means the
> hub has to have it's own external power supply, typically a wall-wart.
> The ports on your computer are typically powered and should be able to
> power a 200 mA device with no problem. If this is a tiny hub used with a
> laptop, see if you can find one that has a battery bay.
More information about the freebsd-stable
mailing list