freebsd-stable Digest, Vol 53, Issue 6

[Julian Elischer]

  I have the same Lexar Jumpdrive and it seems to work for me on an Asus P4PE
with intel EHCI driver, as long as I plug it in AFTER booting.

however:
It hangs if I have the drive in during boot.
It doesn't seem to give me the speed I get on another system

BTW the speeds are:

low speed (1.5Mb/Sec)

full speed (12Mb/sec)

high speed (480Mb/sec)


I'm working on the USB code at the moment so I'm hoping to gete it fixed.

-- original message:

Hello,

> I have an ASUS P4C-800-E Deluxe Motherboard, P4 3.0GHz processor with builtin
> USB 2.0 controllers.
> 
> I am having a problem with the Lexar Media JumpDrive 2.0 Pro 256M memory 
> keystick.
> 
> usbd nevers sees it. I finally went into BIOS and set the Speed for the USB
> 2.0  Controller to FullSpeed (maybe HighSpeed, in whatever case its 12MBps as
> opposed to 240MBps). When setting it to 12MBps, usbd sees the drive and
> attaches it. Setting the speed to higher, usbd does NOT attach it.
> 

I don't know how the Bios is connecte with this...

>> 
> 
> Also NOTE: I have a SIIG SlimHub 2.0 4 ports, that I can not attach my 
> JumpDrive too. I must set the speed to 12MBps and attach it directly to a
> port on my PC to get it to see it.
> 
> Any help in this would be appreciated.
> 
> Thanks! Michael E. Mercer
> 
> My system is the latest 4.9-Stable build as of yesterday.

I committed some relevant stuff yesterday. make sure you have that..

-- 
+------------------------------------+       ______ _  __
|   __--_|\  Julian Elischer         |       \     U \/ / hard at work in
|  /       \ julian at elischer.org     +------>x   USA    \ a very strange
| (   OZ    )                                \___   ___ | country !
+- X_.---._/    presently in San Francisco       \_/   \\
           v