ATI Radeon 9600 SE & OpenGL?

[Barry Pederson]

Spencer Chan wrote:
> Just to add some data point, i have
> 
> ~#pciconf -l -v|egrep agp\|drm
> agp0 at pci0:0:0:  class=0x060000 card=0x00000000 chip=0x30991106 rev=0x00
> hdr=0x00
> drm0 at pci1:0:0:  class=0x030000 card=0x017018bc chip=0x59641002 rev=0x01
> hdr=0x00
> ~#dmesg |grep drm
> drm0: <ATI Radeon RV280 9200 SE> port 0xa000-0xa0ff mem
> 0xe1000000-0xe100ffff,0xd0000000-0xd7ffffff irq 11 at device 0.0 on pci1
> info: [drm] AGP at 0xc0000000 256MB
> info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
> info: [drm] Loading R200 Microcode
> drm0: [MPSAFE]
> info: [drm] Loading R200 Microcode
> 
> My system is RELENG_5_2, with src/sys/dev/drm/radeon* updated to HEAD to
> recognize my card's PCI id. I am using XFree86 4.4 binaries.

Interesting, I don't get anything about microcode loading. My equivalent 
output is:

pciconf -l -v|egrep agp\|drm
------------
agp0 at pci0:0:0:  class=0x060000 card=0x01621028 chip=0x25788086 rev=0x02
     hdr=0x00
drm0 at pci1:0:0:  class=0x030000 card=0x7c13174b chip=0x59611002 rev=0x01
     hdr=0x00
------------


dmesg |grep drm
-----------
drm0: <ATI Radeon RV280 9200> port 0xde00-0xdeff mem
     0xfe9e0000-0xfe9effff,0xf0000000-0xf7ffffff irq 11
     at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
------------

This is on 5.2.1-RELEASE-p1, maybe going to HEAD would help.  I'd 
imagine you'd want the whole src/sys/dev/drm directory, and not just the 
radeon* files.  Although reading through the source of what I have now 
it's not obvious why the microcode loading doesn't apply to my card already.

	Barry